1	/****************************************************************************
2	**
3	** Copyright (C) 2019 The Qt Company Ltd.
4	** Copyright (C) 2016 Intel Corporation.
5	** Copyright (C) 2013 Olivier Goffart <[email protected]>
6	** Contact: https://www.qt.io/licensing/
7	**
8	** This file is part of the QtCore module of the Qt Toolkit.
9	**
10	** $QT_BEGIN_LICENSE:LGPL$
11	** Commercial License Usage
12	** Licensees holding valid commercial Qt licenses may use this file in
13	** accordance with the commercial license agreement provided with the
14	** Software or, alternatively, in accordance with the terms contained in
15	** a written agreement between you and The Qt Company. For licensing terms
16	** and conditions see https://www.qt.io/terms-conditions. For further
17	** information use the contact form at https://www.qt.io/contact-us.
18	**
19	** GNU Lesser General Public License Usage
20	** Alternatively, this file may be used under the terms of the GNU Lesser
21	** General Public License version 3 as published by the Free Software
22	** Foundation and appearing in the file LICENSE.LGPL3 included in the
23	** packaging of this file. Please review the following information to
24	** ensure the GNU Lesser General Public License version 3 requirements
25	** will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
26	**
27	** GNU General Public License Usage
28	** Alternatively, this file may be used under the terms of the GNU
29	** General Public License version 2.0 or (at your option) the GNU General
30	** Public license version 3 or any later version approved by the KDE Free
31	** Qt Foundation. The licenses are as published by the Free Software
32	** Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
33	** included in the packaging of this file. Please review the following
34	** information to ensure the GNU General Public License requirements will
35	** be met: https://www.gnu.org/licenses/gpl-2.0.html and
36	** https://www.gnu.org/licenses/gpl-3.0.html.
37	**
38	** $QT_END_LICENSE$
39	**
40	****************************************************************************/
41
42	#include "qobject.h"
43	#include "qobject_p.h"
44	#include "qmetaobject_p.h"
45
46	#include "qabstracteventdispatcher.h"
47	#include "qabstracteventdispatcher_p.h"
48	#include "qcoreapplication.h"
49	#include "qcoreapplication_p.h"
50	#include "qloggingcategory.h"
51	#include "qvariant.h"
52	#include "qmetaobject.h"
53	#include <qregexp.h>
54	#if QT_CONFIG(regularexpression)
55	# include <qregularexpression.h>
56	#endif
57	#include <qthread.h>
58	#include <private/qthread_p.h>
59	#include <qdebug.h>
60	#include <qpair.h>
61	#include <qvarlengtharray.h>
62	#include <qscopeguard.h>
63	#include <qset.h>
64	#if QT_CONFIG(thread)
65	#include <qsemaphore.h>
66	#endif
67	#include <qsharedpointer.h>
68
69	#include <private/qorderedmutexlocker_p.h>
70	#include <private/qhooks_p.h>
71	#include <qtcore_tracepoints_p.h>
72
73	#include <new>
74	#include <mutex>
75
76	#include <ctype.h>
77	#include <limits.h>
78
79	QT_BEGIN_NAMESPACE
80
81	static int DIRECT_CONNECTION_ONLY = 0;
82
83	Q_LOGGING_CATEGORY(lcConnections, "qt.core.qmetaobject.connectslotsbyname")
84
85	Q_CORE_EXPORT QBasicAtomicPointer<QSignalSpyCallbackSet> qt_signal_spy_callback_set = Q_BASIC_ATOMIC_INITIALIZER(nullptr);
86
87	void qt_register_signal_spy_callbacks(QSignalSpyCallbackSet *callback_set)
88	{
89	qt_signal_spy_callback_set.storeRelease(newValue: callback_set);
90	}
91
92	QDynamicMetaObjectData::~QDynamicMetaObjectData()
93	{
94	}
95
96	QAbstractDynamicMetaObject::~QAbstractDynamicMetaObject()
97	{
98	}
99
100	static int *queuedConnectionTypes(const QList<QByteArray> &typeNames)
101	{
102	int *types = new int [typeNames.count() + 1];
103	Q_CHECK_PTR(types);
104	for (int i = 0; i < typeNames.count(); ++i) {
105	const QByteArray typeName = typeNames.at(i);
106	if (typeName.endsWith(c: '*'))
107	types[i] = QMetaType::VoidStar;
108	else
109	types[i] = QMetaType::type(typeName);
110
111	if (!types[i]) {
112	qWarning(msg: "QObject::connect: Cannot queue arguments of type '%s'\n"
113	"(Make sure '%s' is registered using qRegisterMetaType().)",
114	typeName.constData(), typeName.constData());
115	delete [] types;
116	return nullptr;
117	}
118	}
119	types[typeNames.count()] = 0;
120
121	return types;
122	}
123
124	static int *queuedConnectionTypes(const QArgumentType *argumentTypes, int argc)
125	{
126	QScopedArrayPointer<int> types(new int [argc + 1]);
127	for (int i = 0; i < argc; ++i) {
128	const QArgumentType &type = argumentTypes[i];
129	if (type.type())
130	types[i] = type.type();
131	else if (type.name().endsWith(c: '*'))
132	types[i] = QMetaType::VoidStar;
133	else
134	types[i] = QMetaType::type(typeName: type.name());
135
136	if (!types[i]) {
137	qWarning(msg: "QObject::connect: Cannot queue arguments of type '%s'\n"
138	"(Make sure '%s' is registered using qRegisterMetaType().)",
139	type.name().constData(), type.name().constData());
140	return nullptr;
141	}
142	}
143	types[argc] = 0;
144
145	return types.take();
146	}
147
148	static QBasicMutex _q_ObjectMutexPool[131];
149
150	/**
151	* \internal
152	* mutex to be locked when accessing the connection lists or the senders list
153	*/
154	static inline QBasicMutex *signalSlotLock(const QObject *o)
155	{
156	return &_q_ObjectMutexPool[uint(quintptr(o)) % sizeof(_q_ObjectMutexPool)/sizeof(QBasicMutex)];
157	}
158
159	#if QT_VERSION < 0x60000
160	extern "C" Q_CORE_EXPORT void qt_addObject(QObject *)
161	{}
162
163	extern "C" Q_CORE_EXPORT void qt_removeObject(QObject *)
164	{}
165	#endif
166
167	void (*QAbstractDeclarativeData::destroyed)(QAbstractDeclarativeData *, QObject *) = nullptr;
168	void (*QAbstractDeclarativeData::destroyed_qml1)(QAbstractDeclarativeData *, QObject *) = nullptr;
169	void (*QAbstractDeclarativeData::parentChanged)(QAbstractDeclarativeData *, QObject *, QObject *) = nullptr;
170	void (*QAbstractDeclarativeData::signalEmitted)(QAbstractDeclarativeData *, QObject *, int, void **) = nullptr;
171	int (*QAbstractDeclarativeData::receivers)(QAbstractDeclarativeData *, const QObject *, int) = nullptr;
172	bool (*QAbstractDeclarativeData::isSignalConnected)(QAbstractDeclarativeData *, const QObject *, int) = nullptr;
173	void (*QAbstractDeclarativeData::setWidgetParent)(QObject *, QObject *) = nullptr;
174
175	/*!
176	\fn QObjectData::QObjectData()
177	\internal
178	*/
179
180
181	QObjectData::~QObjectData() {}
182
183	QMetaObject *QObjectData::dynamicMetaObject() const
184	{
185	return metaObject->toDynamicMetaObject(q_ptr);
186	}
187
188	QObjectPrivate::QObjectPrivate(int version)
189	: threadData(nullptr), currentChildBeingDeleted(nullptr)
190	{
191	checkForIncompatibleLibraryVersion(version);
192
193	// QObjectData initialization
194	q_ptr = nullptr;
195	parent = nullptr; // no parent yet. It is set by setParent()
196	isWidget = false; // assume not a widget object
197	blockSig = false; // not blocking signals
198	wasDeleted = false; // double-delete catcher
199	isDeletingChildren = false; // set by deleteChildren()
200	sendChildEvents = true; // if we should send ChildAdded and ChildRemoved events to parent
201	receiveChildEvents = true;
202	postedEvents = 0;
203	extraData = nullptr;
204	metaObject = nullptr;
205	isWindow = false;
206	deleteLaterCalled = false;
207	}
208
209	QObjectPrivate::~QObjectPrivate()
210	{
211	auto thisThreadData = threadData.loadRelaxed();
212	if (extraData && !extraData->runningTimers.isEmpty()) {
213	if (Q_LIKELY(thisThreadData->thread.loadAcquire() == QThread::currentThread())) {
214	// unregister pending timers
215	if (thisThreadData->hasEventDispatcher())
216	thisThreadData->eventDispatcher.loadRelaxed()->unregisterTimers(object: q_ptr);
217
218	// release the timer ids back to the pool
219	for (int i = 0; i < extraData->runningTimers.size(); ++i)
220	QAbstractEventDispatcherPrivate::releaseTimerId(id: extraData->runningTimers.at(i));
221	} else {
222	qWarning(msg: "QObject::~QObject: Timers cannot be stopped from another thread");
223	}
224	}
225
226	if (postedEvents)
227	QCoreApplication::removePostedEvents(receiver: q_ptr, eventType: 0);
228
229	thisThreadData->deref();
230
231	if (metaObject) metaObject->objectDestroyed(q_ptr);
232
233	#ifndef QT_NO_USERDATA
234	if (extraData)
235	qDeleteAll(c: extraData->userData);
236	#endif
237	delete extraData;
238	}
239
240	/*!
241	\internal
242	For a given metaobject, compute the signal offset, and the method offset (including signals)
243	*/
244	static void computeOffsets(const QMetaObject *metaobject, int *signalOffset, int *methodOffset)
245	{
246	*signalOffset = *methodOffset = 0;
247	const QMetaObject *m = metaobject->d.superdata;
248	while (m) {
249	const QMetaObjectPrivate *d = QMetaObjectPrivate::get(metaobject: m);
250	*methodOffset += d->methodCount;
251	Q_ASSERT(d->revision >= 4);
252	*signalOffset += d->signalCount;
253	m = m->d.superdata;
254	}
255	}
256
257	// Used by QAccessibleWidget
258	bool QObjectPrivate::isSender(const QObject *receiver, const char *signal) const
259	{
260	Q_Q(const QObject);
261	int signal_index = signalIndex(signalName: signal);
262	ConnectionData *cd = connections.loadRelaxed();
263	if (signal_index < 0 || !cd)
264	return false;
265	QBasicMutexLocker locker(signalSlotLock(o: q));
266	if (signal_index < cd->signalVectorCount()) {
267	const QObjectPrivate::Connection *c = cd->signalVector.loadRelaxed()->at(i: signal_index).first.loadRelaxed();
268
269	while (c) {
270	if (c->receiver.loadRelaxed() == receiver)
271	return true;
272	c = c->nextConnectionList.loadRelaxed();
273	}
274	}
275	return false;
276	}
277
278	// Used by QAccessibleWidget
279	QObjectList QObjectPrivate::receiverList(const char *signal) const
280	{
281	QObjectList returnValue;
282	int signal_index = signalIndex(signalName: signal);
283	ConnectionData *cd = connections.loadRelaxed();
284	if (signal_index < 0 || !cd)
285	return returnValue;
286	if (signal_index < cd->signalVectorCount()) {
287	const QObjectPrivate::Connection *c = cd->signalVector.loadRelaxed()->at(i: signal_index).first.loadRelaxed();
288
289	while (c) {
290	QObject *r = c->receiver.loadRelaxed();
291	if (r)
292	returnValue << r;
293	c = c->nextConnectionList.loadRelaxed();
294	}
295	}
296	return returnValue;
297	}
298
299	// Used by QAccessibleWidget
300	QObjectList QObjectPrivate::senderList() const
301	{
302	QObjectList returnValue;
303	ConnectionData *cd = connections.loadRelaxed();
304	if (cd) {
305	QBasicMutexLocker locker(signalSlotLock(o: q_func()));
306	for (Connection *c = cd->senders; c; c = c->next)
307	returnValue << c->sender;
308	}
309	return returnValue;
310	}
311
312	/*!
313	\internal
314	Add the connection \a c to the list of connections of the sender's object
315	for the specified \a signal
316
317	The signalSlotLock() of the sender and receiver must be locked while calling
318	this function
319
320	Will also add the connection in the sender's list of the receiver.
321	*/
322	void QObjectPrivate::addConnection(int signal, Connection *c)
323	{
324	Q_ASSERT(c->sender == q_ptr);
325	ensureConnectionData();
326	ConnectionData *cd = connections.loadRelaxed();
327	cd->resizeSignalVector(size: signal + 1);
328
329	ConnectionList &connectionList = cd->connectionsForSignal(signal);
330	if (connectionList.last.loadRelaxed()) {
331	Q_ASSERT(connectionList.last.loadRelaxed()->receiver.loadRelaxed());
332	connectionList.last.loadRelaxed()->nextConnectionList.storeRelaxed(newValue: c);
333	} else {
334	connectionList.first.storeRelaxed(newValue: c);
335	}
336	c->id = ++cd->currentConnectionId;
337	c->prevConnectionList = connectionList.last.loadRelaxed();
338	connectionList.last.storeRelaxed(newValue: c);
339
340	QObjectPrivate *rd = QObjectPrivate::get(o: c->receiver.loadRelaxed());
341	rd->ensureConnectionData();
342
343	c->prev = &(rd->connections.loadRelaxed()->senders);
344	c->next = *c->prev;
345	*c->prev = c;
346	if (c->next)
347	c->next->prev = &c->next;
348	}
349
350	void QObjectPrivate::ConnectionData::removeConnection(QObjectPrivate::Connection *c)
351	{
352	Q_ASSERT(c->receiver.loadRelaxed());
353	ConnectionList &connections = signalVector.loadRelaxed()->at(i: c->signal_index);
354	c->receiver.storeRelaxed(newValue: nullptr);
355	QThreadData *td = c->receiverThreadData.loadRelaxed();
356	if (td)
357	td->deref();
358	c->receiverThreadData.storeRelaxed(newValue: nullptr);
359
360	#ifndef QT_NO_DEBUG
361	bool found = false;
362	for (Connection *cc = connections.first.loadRelaxed(); cc; cc = cc->nextConnectionList.loadRelaxed()) {
363	if (cc == c) {
364	found = true;
365	break;
366	}
367	}
368	Q_ASSERT(found);
369	#endif
370
371	// remove from the senders linked list
372	*c->prev = c->next;
373	if (c->next)
374	c->next->prev = c->prev;
375	c->prev = nullptr;
376
377	if (connections.first.loadRelaxed() == c)
378	connections.first.storeRelaxed(newValue: c->nextConnectionList.loadRelaxed());
379	if (connections.last.loadRelaxed() == c)
380	connections.last.storeRelaxed(newValue: c->prevConnectionList);
381	Q_ASSERT(signalVector.loadRelaxed()->at(c->signal_index).first.loadRelaxed() != c);
382	Q_ASSERT(signalVector.loadRelaxed()->at(c->signal_index).last.loadRelaxed() != c);
383
384	// keep c->nextConnectionList intact, as it might still get accessed by activate
385	Connection *n = c->nextConnectionList.loadRelaxed();
386	if (n)
387	n->prevConnectionList = c->prevConnectionList;
388	if (c->prevConnectionList)
389	c->prevConnectionList->nextConnectionList.storeRelaxed(newValue: n);
390	c->prevConnectionList = nullptr;
391
392	Q_ASSERT(c != orphaned.loadRelaxed());
393	// add c to orphanedConnections
394	Connection *o = nullptr;
395	/* No ABA issue here: When adding a node, we only care about the list head, it doesn't
396	* matter if the tail changes.
397	*/
398	do {
399	o = orphaned.loadRelaxed();
400	c->nextInOrphanList = o;
401	} while (!orphaned.testAndSetRelease(expectedValue: o, newValue: c));
402
403	#ifndef QT_NO_DEBUG
404	found = false;
405	for (Connection *cc = connections.first.loadRelaxed(); cc; cc = cc->nextConnectionList.loadRelaxed()) {
406	if (cc == c) {
407	found = true;
408	break;
409	}
410	}
411	Q_ASSERT(!found);
412	#endif
413
414	}
415
416	void QObjectPrivate::ConnectionData::cleanOrphanedConnectionsImpl(QObject *sender, LockPolicy lockPolicy)
417	{
418	QBasicMutex *senderMutex = signalSlotLock(o: sender);
419	ConnectionOrSignalVector *c = nullptr;
420	{
421	std::unique_lock<QBasicMutex> lock(*senderMutex, std::defer_lock_t{});
422	if (lockPolicy == NeedToLock)
423	lock.lock();
424	if (ref.loadAcquire() > 1)
425	return;
426
427	// Since ref == 1, no activate() is in process since we locked the mutex. That implies,
428	// that nothing can reference the orphaned connection objects anymore and they can
429	// be safely deleted
430	c = orphaned.fetchAndStoreRelaxed(newValue: nullptr);
431	}
432	if (c) {
433	// Deleting c might run arbitrary user code, so we must not hold the lock
434	if (lockPolicy == AlreadyLockedAndTemporarilyReleasingLock) {
435	senderMutex->unlock();
436	deleteOrphaned(c);
437	senderMutex->lock();
438	} else {
439	deleteOrphaned(c);
440	}
441	}
442	}
443
444	void QObjectPrivate::ConnectionData::deleteOrphaned(QObjectPrivate::ConnectionOrSignalVector *o)
445	{
446	while (o) {
447	QObjectPrivate::ConnectionOrSignalVector *next = nullptr;
448	if (SignalVector *v = ConnectionOrSignalVector::asSignalVector(c: o)) {
449	next = v->nextInOrphanList;
450	free(ptr: v);
451	} else {
452	QObjectPrivate::Connection *c = static_cast<Connection *>(o);
453	next = c->nextInOrphanList;
454	Q_ASSERT(!c->receiver.loadRelaxed());
455	Q_ASSERT(!c->prev);
456	c->freeSlotObject();
457	c->deref();
458	}
459	o = next;
460	}
461	}
462
463	/*! \internal
464
465	Returns \c true if the signal with index \a signal_index from object \a sender is connected.
466
467	\a signal_index must be the index returned by QObjectPrivate::signalIndex;
468	*/
469	bool QObjectPrivate::isSignalConnected(uint signalIndex, bool checkDeclarative) const
470	{
471	if (checkDeclarative && isDeclarativeSignalConnected(signal_index: signalIndex))
472	return true;
473
474	ConnectionData *cd = connections.loadRelaxed();
475	if (!cd)
476	return false;
477	SignalVector *signalVector = cd->signalVector.loadRelaxed();
478	if (!signalVector)
479	return false;
480
481	if (signalVector->at(i: -1).first.loadRelaxed())
482	return true;
483
484	if (signalIndex < uint(cd->signalVectorCount())) {
485	const QObjectPrivate::Connection *c = signalVector->at(i: signalIndex).first.loadRelaxed();
486	while (c) {
487	if (c->receiver.loadRelaxed())
488	return true;
489	c = c->nextConnectionList.loadRelaxed();
490	}
491	}
492	return false;
493	}
494
495	bool QObjectPrivate::maybeSignalConnected(uint signalIndex) const
496	{
497	ConnectionData *cd = connections.loadRelaxed();
498	if (!cd)
499	return false;
500	SignalVector *signalVector = cd->signalVector.loadRelaxed();
501	if (!signalVector)
502	return false;
503
504	if (signalVector->at(i: -1).first.loadAcquire())
505	return true;
506
507	if (signalIndex < uint(cd->signalVectorCount())) {
508	const QObjectPrivate::Connection *c = signalVector->at(i: signalIndex).first.loadAcquire();
509	return c != nullptr;
510	}
511	return false;
512	}
513
514	/*!
515	\internal
516	*/
517	QAbstractMetaCallEvent::~QAbstractMetaCallEvent()
518	{
519	#if QT_CONFIG(thread)
520	if (semaphore_)
521	semaphore_->release();
522	#endif
523	}
524
525	/*!
526	\internal
527	*/
528	inline void QMetaCallEvent::allocArgs()
529	{
530	if (!d.nargs_)
531	return;
532
533	constexpr size_t each = sizeof(void*) + sizeof(int);
534	void *const memory = d.nargs_ * each > sizeof(prealloc_) ?
535	calloc(nmemb: d.nargs_, size: each) : prealloc_;
536
537	Q_CHECK_PTR(memory);
538	d.args_ = static_cast<void **>(memory);
539	}
540
541	/*!
542	\internal
543
544	Used for blocking queued connections, just passes \a args through without
545	allocating any memory.
546	*/
547	QMetaCallEvent::QMetaCallEvent(ushort method_offset, ushort method_relative,
548	QObjectPrivate::StaticMetaCallFunction callFunction,
549	const QObject *sender, int signalId,
550	void **args, QSemaphore *semaphore)
551	: QAbstractMetaCallEvent(sender, signalId, semaphore),
552	d({.slotObj_: nullptr, .args_: args, .callFunction_: callFunction, .nargs_: 0, .method_offset_: method_offset, .method_relative_: method_relative}),
553	prealloc_()
554	{
555	}
556
557	/*!
558	\internal
559
560	Used for blocking queued connections, just passes \a args through without
561	allocating any memory.
562	*/
563	QMetaCallEvent::QMetaCallEvent(QtPrivate::QSlotObjectBase *slotO,
564	const QObject *sender, int signalId,
565	void **args, QSemaphore *semaphore)
566	: QAbstractMetaCallEvent(sender, signalId, semaphore),
567	d({.slotObj_: slotO, .args_: args, .callFunction_: nullptr, .nargs_: 0, .method_offset_: 0, .method_relative_: ushort(-1)}),
568	prealloc_()
569	{
570	if (d.slotObj_)
571	d.slotObj_->ref();
572	}
573
574	/*!
575	\internal
576
577	Allocates memory for \a nargs; code creating an event needs to initialize
578	the void* and int arrays by accessing \a args() and \a types(), respectively.
579	*/
580	QMetaCallEvent::QMetaCallEvent(ushort method_offset, ushort method_relative,
581	QObjectPrivate::StaticMetaCallFunction callFunction,
582	const QObject *sender, int signalId,
583	int nargs)
584	: QAbstractMetaCallEvent(sender, signalId),
585	d({.slotObj_: nullptr, .args_: nullptr, .callFunction_: callFunction, .nargs_: nargs, .method_offset_: method_offset, .method_relative_: method_relative}),
586	prealloc_()
587	{
588	allocArgs();
589	}
590
591	/*!
592	\internal
593
594	Allocates memory for \a nargs; code creating an event needs to initialize
595	the void* and int arrays by accessing \a args() and \a types(), respectively.
596	*/
597	QMetaCallEvent::QMetaCallEvent(QtPrivate::QSlotObjectBase *slotO,
598	const QObject *sender, int signalId,
599	int nargs)
600	: QAbstractMetaCallEvent(sender, signalId),
601	d({.slotObj_: slotO, .args_: nullptr, .callFunction_: nullptr, .nargs_: nargs, .method_offset_: 0, .method_relative_: ushort(-1)}),
602	prealloc_()
603	{
604	if (d.slotObj_)
605	d.slotObj_->ref();
606	allocArgs();
607	}
608
609	/*!
610	\internal
611	*/
612	QMetaCallEvent::~QMetaCallEvent()
613	{
614	if (d.nargs_) {
615	int *typeIDs = types();
616	for (int i = 0; i < d.nargs_; ++i) {
617	if (typeIDs[i] && d.args_[i])
618	QMetaType::destroy(type: typeIDs[i], data: d.args_[i]);
619	}
620	if (reinterpret_cast<void*>(d.args_) != reinterpret_cast<void*>(prealloc_))
621	free(ptr: d.args_);
622	}
623	if (d.slotObj_)
624	d.slotObj_->destroyIfLastRef();
625	}
626
627	/*!
628	\internal
629	*/
630	void QMetaCallEvent::placeMetaCall(QObject *object)
631	{
632	if (d.slotObj_) {
633	d.slotObj_->call(r: object, a: d.args_);
634	} else if (d.callFunction_ && d.method_offset_ <= object->metaObject()->methodOffset()) {
635	d.callFunction_(object, QMetaObject::InvokeMetaMethod, d.method_relative_, d.args_);
636	} else {
637	QMetaObject::metacall(object, QMetaObject::InvokeMetaMethod,
638	d.method_offset_ + d.method_relative_, d.args_);
639	}
640	}
641
642	/*!
643	\class QSignalBlocker
644	\brief Exception-safe wrapper around QObject::blockSignals().
645	\since 5.3
646	\ingroup objectmodel
647	\inmodule QtCore
648
649	\reentrant
650
651	QSignalBlocker can be used wherever you would otherwise use a
652	pair of calls to blockSignals(). It blocks signals in its
653	constructor and in the destructor it resets the state to what
654	it was before the constructor ran.
655
656	\snippet code/src_corelib_kernel_qobject.cpp 53
657	is thus equivalent to
658	\snippet code/src_corelib_kernel_qobject.cpp 54
659
660	except the code using QSignalBlocker is safe in the face of
661	exceptions.
662
663	\sa QMutexLocker, QEventLoopLocker
664	*/
665
666	/*!
667	\fn QSignalBlocker::QSignalBlocker(QObject *object)
668
669	Constructor. Calls \a{object}->blockSignals(true).
670	*/
671
672	/*!
673	\fn QSignalBlocker::QSignalBlocker(QObject &object)
674	\overload
675
676	Calls \a{object}.blockSignals(true).
677	*/
678
679	/*!
680	\fn QSignalBlocker::QSignalBlocker(QSignalBlocker &&other)
681
682	Move-constructs a signal blocker from \a other. \a other will have
683	a no-op destructor, while responsibility for restoring the
684	QObject::signalsBlocked() state is transferred to the new object.
685	*/
686
687	/*!
688	\fn QSignalBlocker &QSignalBlocker::operator=(QSignalBlocker &&other)
689
690	Move-assigns this signal blocker from \a other. \a other will have
691	a no-op destructor, while responsibility for restoring the
692	QObject::signalsBlocked() state is transferred to this object.
693
694	The object's signals this signal blocker was blocking prior to
695	being moved to, if any, are unblocked \e except in the case where
696	both instances block the same object's signals and \c *this is
697	unblocked while \a other is not, at the time of the move.
698	*/
699
700	/*!
701	\fn QSignalBlocker::~QSignalBlocker()
702
703	Destructor. Restores the QObject::signalsBlocked() state to what it
704	was before the constructor ran, unless unblock() has been called
705	without a following reblock(), in which case it does nothing.
706	*/
707
708	/*!
709	\fn void QSignalBlocker::reblock()
710
711	Re-blocks signals after a previous unblock().
712
713	The numbers of reblock() and unblock() calls are not counted, so
714	every reblock() undoes any number of unblock() calls.
715	*/
716
717	/*!
718	\fn void QSignalBlocker::unblock()
719
720	Temporarily restores the QObject::signalsBlocked() state to what
721	it was before this QSignalBlocker's constructor ran. To undo, use
722	reblock().
723
724	The numbers of reblock() and unblock() calls are not counted, so
725	every unblock() undoes any number of reblock() calls.
726	*/
727
728	/*!
729	\class QObject
730	\inmodule QtCore
731	\brief The QObject class is the base class of all Qt objects.
732
733	\ingroup objectmodel
734
735	\reentrant
736
737	QObject is the heart of the Qt \l{Object Model}. The central
738	feature in this model is a very powerful mechanism for seamless
739	object communication called \l{signals and slots}. You can
740	connect a signal to a slot with connect() and destroy the
741	connection with disconnect(). To avoid never ending notification
742	loops you can temporarily block signals with blockSignals(). The
743	protected functions connectNotify() and disconnectNotify() make
744	it possible to track connections.
745
746	QObjects organize themselves in \l {Object Trees & Ownership}
747	{object trees}. When you create a QObject with another object as
748	parent, the object will automatically add itself to the parent's
749	children() list. The parent takes ownership of the object; i.e.,
750	it will automatically delete its children in its destructor. You
751	can look for an object by name and optionally type using
752	findChild() or findChildren().
753
754	Every object has an objectName() and its class name can be found
755	via the corresponding metaObject() (see QMetaObject::className()).
756	You can determine whether the object's class inherits another
757	class in the QObject inheritance hierarchy by using the
758	inherits() function.
759
760	When an object is deleted, it emits a destroyed() signal. You can
761	catch this signal to avoid dangling references to QObjects.
762
763	QObjects can receive events through event() and filter the events
764	of other objects. See installEventFilter() and eventFilter() for
765	details. A convenience handler, childEvent(), can be reimplemented
766	to catch child events.
767
768	Last but not least, QObject provides the basic timer support in
769	Qt; see QTimer for high-level support for timers.
770
771	Notice that the Q_OBJECT macro is mandatory for any object that
772	implements signals, slots or properties. You also need to run the
773	\l{moc}{Meta Object Compiler} on the source file. We strongly
774	recommend the use of this macro in all subclasses of QObject
775	regardless of whether or not they actually use signals, slots and
776	properties, since failure to do so may lead certain functions to
777	exhibit strange behavior.
778
779	All Qt widgets inherit QObject. The convenience function
780	isWidgetType() returns whether an object is actually a widget. It
781	is much faster than
782	\l{qobject_cast()}{qobject_cast}<QWidget *>(\e{obj}) or
783	\e{obj}->\l{inherits()}{inherits}("QWidget").
784
785	Some QObject functions, e.g. children(), return a QObjectList.
786	QObjectList is a typedef for QList<QObject *>.
787
788	\section1 Thread Affinity
789
790	A QObject instance is said to have a \e{thread affinity}, or that
791	it \e{lives} in a certain thread. When a QObject receives a
792	\l{Qt::QueuedConnection}{queued signal} or a \l{The Event
793	System#Sending Events}{posted event}, the slot or event handler
794	will run in the thread that the object lives in.
795
796	\note If a QObject has no thread affinity (that is, if thread()
797	returns zero), or if it lives in a thread that has no running event
798	loop, then it cannot receive queued signals or posted events.
799
800	By default, a QObject lives in the thread in which it is created.
801	An object's thread affinity can be queried using thread() and
802	changed using moveToThread().
803
804	All QObjects must live in the same thread as their parent. Consequently:
805
806	\list
807	\li setParent() will fail if the two QObjects involved live in
808	different threads.
809	\li When a QObject is moved to another thread, all its children
810	will be automatically moved too.
811	\li moveToThread() will fail if the QObject has a parent.
812	\li If QObjects are created within QThread::run(), they cannot
813	become children of the QThread object because the QThread does
814	not live in the thread that calls QThread::run().
815	\endlist
816
817	\note A QObject's member variables \e{do not} automatically become
818	its children. The parent-child relationship must be set by either
819	passing a pointer to the child's \l{QObject()}{constructor}, or by
820	calling setParent(). Without this step, the object's member variables
821	will remain in the old thread when moveToThread() is called.
822
823	\target No copy constructor
824	\section1 No Copy Constructor or Assignment Operator
825
826	QObject has neither a copy constructor nor an assignment operator.
827	This is by design. Actually, they are declared, but in a
828	\c{private} section with the macro Q_DISABLE_COPY(). In fact, all
829	Qt classes derived from QObject (direct or indirect) use this
830	macro to declare their copy constructor and assignment operator to
831	be private. The reasoning is found in the discussion on
832	\l{Identity vs Value} {Identity vs Value} on the Qt \l{Object
833	Model} page.
834
835	The main consequence is that you should use pointers to QObject
836	(or to your QObject subclass) where you might otherwise be tempted
837	to use your QObject subclass as a value. For example, without a
838	copy constructor, you can't use a subclass of QObject as the value
839	to be stored in one of the container classes. You must store
840	pointers.
841
842	\section1 Auto-Connection
843
844	Qt's meta-object system provides a mechanism to automatically connect
845	signals and slots between QObject subclasses and their children. As long
846	as objects are defined with suitable object names, and slots follow a
847	simple naming convention, this connection can be performed at run-time
848	by the QMetaObject::connectSlotsByName() function.
849
850	\l uic generates code that invokes this function to enable
851	auto-connection to be performed between widgets on forms created
852	with \e{Qt Designer}. More information about using auto-connection with \e{Qt Designer} is
853	given in the \l{Using a Designer UI File in Your C++ Application} section of
854	the \e{Qt Designer} manual.
855
856	\section1 Dynamic Properties
857
858	From Qt 4.2, dynamic properties can be added to and removed from QObject
859	instances at run-time. Dynamic properties do not need to be declared at
860	compile-time, yet they provide the same advantages as static properties
861	and are manipulated using the same API - using property() to read them
862	and setProperty() to write them.
863
864	From Qt 4.3, dynamic properties are supported by
865	\l{Qt Designer's Widget Editing Mode#The Property Editor}{Qt Designer},
866	and both standard Qt widgets and user-created forms can be given dynamic
867	properties.
868
869	\section1 Internationalization (I18n)
870
871	All QObject subclasses support Qt's translation features, making it possible
872	to translate an application's user interface into different languages.
873
874	To make user-visible text translatable, it must be wrapped in calls to
875	the tr() function. This is explained in detail in the
876	\l{Writing Source Code for Translation} document.
877
878	\sa QMetaObject, QPointer, QObjectCleanupHandler, Q_DISABLE_COPY()
879	\sa {Object Trees & Ownership}
880	*/
881
882	/*****************************************************************************
883	QObject member functions
884	*****************************************************************************/
885
886	// check the constructor's parent thread argument
887	static bool check_parent_thread(QObject *parent,
888	QThreadData *parentThreadData,
889	QThreadData *currentThreadData)
890	{
891	if (parent && parentThreadData != currentThreadData) {
892	QThread *parentThread = parentThreadData->thread.loadAcquire();
893	QThread *currentThread = currentThreadData->thread.loadAcquire();
894	qWarning(msg: "QObject: Cannot create children for a parent that is in a different thread.\n"
895	"(Parent is %s(%p), parent's thread is %s(%p), current thread is %s(%p)",
896	parent->metaObject()->className(),
897	parent,
898	parentThread ? parentThread->metaObject()->className() : "QThread",
899	parentThread,
900	currentThread ? currentThread->metaObject()->className() : "QThread",
901	currentThread);
902	return false;
903	}
904	return true;
905	}
906
907	/*!
908	Constructs an object with parent object \a parent.
909
910	The parent of an object may be viewed as the object's owner. For
911	instance, a \l{QDialog}{dialog box} is the parent of the \uicontrol{OK}
912	and \uicontrol{Cancel} buttons it contains.
913
914	The destructor of a parent object destroys all child objects.
915
916	Setting \a parent to \nullptr constructs an object with no parent. If the
917	object is a widget, it will become a top-level window.
918
919	\sa parent(), findChild(), findChildren()
920	*/
921
922	QObject::QObject(QObject *parent)
923	: QObject(*new QObjectPrivate, parent)
924	{
925	}
926
927	/*!
928	\internal
929	*/
930	QObject::QObject(QObjectPrivate &dd, QObject *parent)
931	: d_ptr(&dd)
932	{
933	Q_ASSERT_X(this != parent, Q_FUNC_INFO, "Cannot parent a QObject to itself");
934
935	Q_D(QObject);
936	d_ptr->q_ptr = this;
937	auto threadData = (parent && !parent->thread()) ? parent->d_func()->threadData.loadRelaxed() : QThreadData::current();
938	threadData->ref();
939	d->threadData.storeRelaxed(newValue: threadData);
940	if (parent) {
941	QT_TRY {
942	if (!check_parent_thread(parent, parentThreadData: parent ? parent->d_func()->threadData.loadRelaxed() : nullptr, currentThreadData: threadData))
943	parent = nullptr;
944	if (d->isWidget) {
945	if (parent) {
946	d->parent = parent;
947	d->parent->d_func()->children.append(t: this);
948	}
949	// no events sent here, this is done at the end of the QWidget constructor
950	} else {
951	setParent(parent);
952	}
953	} QT_CATCH(...) {
954	threadData->deref();
955	QT_RETHROW;
956	}
957	}
958	#if QT_VERSION < 0x60000
959	qt_addObject(this);
960	#endif
961	if (Q_UNLIKELY(qtHookData[QHooks::AddQObject]))
962	reinterpret_cast<QHooks::AddQObjectCallback>(qtHookData[QHooks::AddQObject])(this);
963	Q_TRACE(QObject_ctor, this);
964	}
965
966	/*!
967	Destroys the object, deleting all its child objects.
968
969	All signals to and from the object are automatically disconnected, and
970	any pending posted events for the object are removed from the event
971	queue. However, it is often safer to use deleteLater() rather than
972	deleting a QObject subclass directly.
973
974	\warning All child objects are deleted. If any of these objects
975	are on the stack or global, sooner or later your program will
976	crash. We do not recommend holding pointers to child objects from
977	outside the parent. If you still do, the destroyed() signal gives
978	you an opportunity to detect when an object is destroyed.
979
980	\warning Deleting a QObject while pending events are waiting to
981	be delivered can cause a crash. You must not delete the QObject
982	directly if it exists in a different thread than the one currently
983	executing. Use deleteLater() instead, which will cause the event
984	loop to delete the object after all pending events have been
985	delivered to it.
986
987	\sa deleteLater()
988	*/
989
990	QObject::~QObject()
991	{
992	Q_D(QObject);
993	d->wasDeleted = true;
994	d->blockSig = 0; // unblock signals so we always emit destroyed()
995
996	QtSharedPointer::ExternalRefCountData *sharedRefcount = d->sharedRefcount.loadRelaxed();
997	if (sharedRefcount) {
998	if (sharedRefcount->strongref.loadRelaxed() > 0) {
999	qWarning(msg: "QObject: shared QObject was deleted directly. The program is malformed and may crash.");
1000	// but continue deleting, it's too late to stop anyway
1001	}
1002
1003	// indicate to all QWeakPointers that this QObject has now been deleted
1004	sharedRefcount->strongref.storeRelaxed(newValue: 0);
1005	if (!sharedRefcount->weakref.deref())
1006	delete sharedRefcount;
1007	}
1008
1009	if (!d->isWidget && d->isSignalConnected(signalIndex: 0)) {
1010	emit destroyed(this);
1011	}
1012
1013	if (d->declarativeData) {
1014	if (static_cast<QAbstractDeclarativeDataImpl*>(d->declarativeData)->ownedByQml1) {
1015	if (QAbstractDeclarativeData::destroyed_qml1)
1016	QAbstractDeclarativeData::destroyed_qml1(d->declarativeData, this);
1017	} else {
1018	if (QAbstractDeclarativeData::destroyed)
1019	QAbstractDeclarativeData::destroyed(d->declarativeData, this);
1020	}
1021	}
1022
1023	QObjectPrivate::ConnectionData *cd = d->connections.loadRelaxed();
1024	if (cd) {
1025	if (cd->currentSender) {
1026	cd->currentSender->receiverDeleted();
1027	cd->currentSender = nullptr;
1028	}
1029
1030	QBasicMutex *signalSlotMutex = signalSlotLock(o: this);
1031	QBasicMutexLocker locker(signalSlotMutex);
1032
1033	// disconnect all receivers
1034	int receiverCount = cd->signalVectorCount();
1035	for (int signal = -1; signal < receiverCount; ++signal) {
1036	QObjectPrivate::ConnectionList &connectionList = cd->connectionsForSignal(signal);
1037
1038	while (QObjectPrivate::Connection *c = connectionList.first.loadRelaxed()) {
1039	Q_ASSERT(c->receiver.loadAcquire());
1040
1041	QBasicMutex *m = signalSlotLock(o: c->receiver.loadRelaxed());
1042	bool needToUnlock = QOrderedMutexLocker::relock(mtx1: signalSlotMutex, mtx2: m);
1043	if (c == connectionList.first.loadAcquire() && c->receiver.loadAcquire()) {
1044	cd->removeConnection(c);
1045	Q_ASSERT(connectionList.first.loadRelaxed() != c);
1046	}
1047	if (needToUnlock)
1048	m->unlock();
1049	}
1050	}
1051
1052	/* Disconnect all senders:
1053	*/
1054	while (QObjectPrivate::Connection *node = cd->senders) {
1055	Q_ASSERT(node->receiver.loadAcquire());
1056	QObject *sender = node->sender;
1057	// Send disconnectNotify before removing the connection from sender's connection list.
1058	// This ensures any eventual destructor of sender will block on getting receiver's lock
1059	// and not finish until we release it.
1060	sender->disconnectNotify(signal: QMetaObjectPrivate::signal(m: sender->metaObject(), signal_index: node->signal_index));
1061	QBasicMutex *m = signalSlotLock(o: sender);
1062	bool needToUnlock = QOrderedMutexLocker::relock(mtx1: signalSlotMutex, mtx2: m);
1063	//the node has maybe been removed while the mutex was unlocked in relock?
1064	if (node != cd->senders) {
1065	// We hold the wrong mutex
1066	Q_ASSERT(needToUnlock);
1067	m->unlock();
1068	continue;
1069	}
1070
1071	QObjectPrivate::ConnectionData *senderData = sender->d_func()->connections.loadRelaxed();
1072	Q_ASSERT(senderData);
1073
1074	QtPrivate::QSlotObjectBase *slotObj = nullptr;
1075	if (node->isSlotObject) {
1076	slotObj = node->slotObj;
1077	node->isSlotObject = false;
1078	}
1079
1080	senderData->removeConnection(c: node);
1081	/*
1082	When we unlock, another thread has the chance to delete/modify sender data.
1083	Thus we need to call cleanOrphanedConnections before unlocking. We use the
1084	variant of the function which assumes that the lock is already held to avoid
1085	a deadlock.
1086	We need to hold m, the sender lock. Considering that we might execute arbitrary user
1087	code, we should already release the signalSlotMutex here – unless they are the same.
1088	*/
1089	const bool locksAreTheSame = signalSlotMutex == m;
1090	if (!locksAreTheSame)
1091	locker.unlock();
1092	senderData->cleanOrphanedConnections(
1093	sender,
1094	lockPolicy: QObjectPrivate::ConnectionData::AlreadyLockedAndTemporarilyReleasingLock
1095	);
1096	if (needToUnlock)
1097	m->unlock();
1098
1099	if (locksAreTheSame) // otherwise already unlocked
1100	locker.unlock();
1101	if (slotObj)
1102	slotObj->destroyIfLastRef();
1103	locker.relock();
1104	}
1105
1106	// invalidate all connections on the object and make sure
1107	// activate() will skip them
1108	cd->currentConnectionId.storeRelaxed(newValue: 0);
1109	}
1110	if (cd && !cd->ref.deref())
1111	delete cd;
1112	d->connections.storeRelaxed(newValue: nullptr);
1113
1114	if (!d->children.isEmpty())
1115	d->deleteChildren();
1116
1117	#if QT_VERSION < 0x60000
1118	qt_removeObject(this);
1119	#endif
1120	if (Q_UNLIKELY(qtHookData[QHooks::RemoveQObject]))
1121	reinterpret_cast<QHooks::RemoveQObjectCallback>(qtHookData[QHooks::RemoveQObject])(this);
1122
1123	Q_TRACE(QObject_dtor, this);
1124
1125	if (d->parent) // remove it from parent object
1126	d->setParent_helper(nullptr);
1127	}
1128
1129	QObjectPrivate::Connection::~Connection()
1130	{
1131	if (ownArgumentTypes) {
1132	const int *v = argumentTypes.loadRelaxed();
1133	if (v != &DIRECT_CONNECTION_ONLY)
1134	delete [] v;
1135	}
1136	if (isSlotObject)
1137	slotObj->destroyIfLastRef();
1138	}
1139
1140
1141	/*!
1142	\fn const QMetaObject *QObject::metaObject() const
1143
1144	Returns a pointer to the meta-object of this object.
1145
1146	A meta-object contains information about a class that inherits
1147	QObject, e.g. class name, superclass name, properties, signals and
1148	slots. Every QObject subclass that contains the Q_OBJECT macro will have a
1149	meta-object.
1150
1151	The meta-object information is required by the signal/slot
1152	connection mechanism and the property system. The inherits()
1153	function also makes use of the meta-object.
1154
1155	If you have no pointer to an actual object instance but still
1156	want to access the meta-object of a class, you can use \l
1157	staticMetaObject.
1158
1159	Example:
1160
1161	\snippet code/src_corelib_kernel_qobject.cpp 1
1162
1163	\sa staticMetaObject
1164	*/
1165
1166	/*!
1167	\variable QObject::staticMetaObject
1168
1169	This variable stores the meta-object for the class.
1170
1171	A meta-object contains information about a class that inherits
1172	QObject, e.g. class name, superclass name, properties, signals and
1173	slots. Every class that contains the Q_OBJECT macro will also have
1174	a meta-object.
1175
1176	The meta-object information is required by the signal/slot
1177	connection mechanism and the property system. The inherits()
1178	function also makes use of the meta-object.
1179
1180	If you have a pointer to an object, you can use metaObject() to
1181	retrieve the meta-object associated with that object.
1182
1183	Example:
1184
1185	\snippet code/src_corelib_kernel_qobject.cpp 2
1186
1187	\sa metaObject()
1188	*/
1189
1190	/*!
1191	\fn template <class T> T qobject_cast(QObject *object)
1192	\fn template <class T> T qobject_cast(const QObject *object)
1193	\relates QObject
1194
1195	Returns the given \a object cast to type T if the object is of type
1196	T (or of a subclass); otherwise returns \nullptr. If \a object is
1197	\nullptr then it will also return \nullptr.
1198
1199	The class T must inherit (directly or indirectly) QObject and be
1200	declared with the \l Q_OBJECT macro.
1201
1202	A class is considered to inherit itself.
1203
1204	Example:
1205
1206	\snippet code/src_corelib_kernel_qobject.cpp 3
1207
1208	The qobject_cast() function behaves similarly to the standard C++
1209	\c dynamic_cast(), with the advantages that it doesn't require
1210	RTTI support and it works across dynamic library boundaries.
1211
1212	qobject_cast() can also be used in conjunction with interfaces;
1213	see the \l{tools/plugandpaint/app}{Plug & Paint} example for details.
1214
1215	\warning If T isn't declared with the Q_OBJECT macro, this
1216	function's return value is undefined.
1217
1218	\sa QObject::inherits()
1219	*/
1220
1221	/*!
1222	\fn bool QObject::inherits(const char *className) const
1223
1224	Returns \c true if this object is an instance of a class that
1225	inherits \a className or a QObject subclass that inherits \a
1226	className; otherwise returns \c false.
1227
1228	A class is considered to inherit itself.
1229
1230	Example:
1231
1232	\snippet code/src_corelib_kernel_qobject.cpp 4
1233
1234	If you need to determine whether an object is an instance of a particular
1235	class for the purpose of casting it, consider using qobject_cast<Type *>(object)
1236	instead.
1237
1238	\sa metaObject(), qobject_cast()
1239	*/
1240
1241	/*!
1242	\property QObject::objectName
1243
1244	\brief the name of this object
1245
1246	You can find an object by name (and type) using findChild().
1247	You can find a set of objects with findChildren().
1248
1249	\snippet code/src_corelib_kernel_qobject.cpp 5
1250
1251	By default, this property contains an empty string.
1252
1253	\sa metaObject(), QMetaObject::className()
1254	*/
1255
1256	QString QObject::objectName() const
1257	{
1258	Q_D(const QObject);
1259	return d->extraData ? d->extraData->objectName : QString();
1260	}
1261
1262	/*
1263	Sets the object's name to \a name.
1264	*/
1265	void QObject::setObjectName(const QString &name)
1266	{
1267	Q_D(QObject);
1268	if (!d->extraData)
1269	d->extraData = new QObjectPrivate::ExtraData;
1270
1271	if (d->extraData->objectName != name) {
1272	d->extraData->objectName = name;
1273	emit objectNameChanged(objectName: d->extraData->objectName, QPrivateSignal());
1274	}
1275	}
1276
1277	/*! \fn void QObject::objectNameChanged(const QString &objectName)
1278
1279	This signal is emitted after the object's name has been changed. The new object name is passed as \a objectName.
1280
1281	\sa QObject::objectName
1282	*/
1283
1284	/*!
1285	\fn bool QObject::isWidgetType() const
1286
1287	Returns \c true if the object is a widget; otherwise returns \c false.
1288
1289	Calling this function is equivalent to calling
1290	\c{inherits("QWidget")}, except that it is much faster.
1291	*/
1292
1293	/*!
1294	\fn bool QObject::isWindowType() const
1295
1296	Returns \c true if the object is a window; otherwise returns \c false.
1297
1298	Calling this function is equivalent to calling
1299	\c{inherits("QWindow")}, except that it is much faster.
1300	*/
1301
1302	/*!
1303	This virtual function receives events to an object and should
1304	return true if the event \a e was recognized and processed.
1305
1306	The event() function can be reimplemented to customize the
1307	behavior of an object.
1308
1309	Make sure you call the parent event class implementation
1310	for all the events you did not handle.
1311
1312	Example:
1313
1314	\snippet code/src_corelib_kernel_qobject.cpp 52
1315
1316	\sa installEventFilter(), timerEvent(), QCoreApplication::sendEvent(),
1317	QCoreApplication::postEvent()
1318	*/
1319
1320	bool QObject::event(QEvent *e)
1321	{
1322	switch (e->type()) {
1323	case QEvent::Timer:
1324	timerEvent(event: (QTimerEvent*)e);
1325	break;
1326
1327	case QEvent::ChildAdded:
1328	case QEvent::ChildPolished:
1329	case QEvent::ChildRemoved:
1330	childEvent(event: (QChildEvent*)e);
1331	break;
1332
1333	case QEvent::DeferredDelete:
1334	qDeleteInEventHandler(o: this);
1335	break;
1336
1337	case QEvent::MetaCall:
1338	{
1339	QAbstractMetaCallEvent *mce = static_cast<QAbstractMetaCallEvent*>(e);
1340
1341	if (!d_func()->connections.loadRelaxed()) {
1342	QBasicMutexLocker locker(signalSlotLock(o: this));
1343	d_func()->ensureConnectionData();
1344	}
1345	QObjectPrivate::Sender sender(this, const_cast<QObject*>(mce->sender()), mce->signalId());
1346
1347	mce->placeMetaCall(object: this);
1348	break;
1349	}
1350
1351	case QEvent::ThreadChange: {
1352	Q_D(QObject);
1353	QThreadData *threadData = d->threadData.loadRelaxed();
1354	QAbstractEventDispatcher *eventDispatcher = threadData->eventDispatcher.loadRelaxed();
1355	if (eventDispatcher) {
1356	QList<QAbstractEventDispatcher::TimerInfo> timers = eventDispatcher->registeredTimers(object: this);
1357	if (!timers.isEmpty()) {
1358	// do not to release our timer ids back to the pool (since the timer ids are moving to a new thread).
1359	eventDispatcher->unregisterTimers(object: this);
1360	QMetaObject::invokeMethod(obj: this, member: "_q_reregisterTimers", type: Qt::QueuedConnection,
1361	Q_ARG(void*, (new QList<QAbstractEventDispatcher::TimerInfo>(timers))));
1362	}
1363	}
1364	break;
1365	}
1366
1367	default:
1368	if (e->type() >= QEvent::User) {
1369	customEvent(event: e);
1370	break;
1371	}
1372	return false;
1373	}
1374	return true;
1375	}
1376
1377	/*!
1378	\fn void QObject::timerEvent(QTimerEvent *event)
1379
1380	This event handler can be reimplemented in a subclass to receive
1381	timer events for the object.
1382
1383	QTimer provides a higher-level interface to the timer
1384	functionality, and also more general information about timers. The
1385	timer event is passed in the \a event parameter.
1386
1387	\sa startTimer(), killTimer(), event()
1388	*/
1389
1390	void QObject::timerEvent(QTimerEvent *)
1391	{
1392	}
1393
1394
1395	/*!
1396	This event handler can be reimplemented in a subclass to receive
1397	child events. The event is passed in the \a event parameter.
1398
1399	QEvent::ChildAdded and QEvent::ChildRemoved events are sent to
1400	objects when children are added or removed. In both cases you can
1401	only rely on the child being a QObject, or if isWidgetType()
1402	returns \c true, a QWidget. (This is because, in the
1403	\l{QEvent::ChildAdded}{ChildAdded} case, the child is not yet
1404	fully constructed, and in the \l{QEvent::ChildRemoved}{ChildRemoved}
1405	case it might have been destructed already).
1406
1407	QEvent::ChildPolished events are sent to widgets when children
1408	are polished, or when polished children are added. If you receive
1409	a child polished event, the child's construction is usually
1410	completed. However, this is not guaranteed, and multiple polish
1411	events may be delivered during the execution of a widget's
1412	constructor.
1413
1414	For every child widget, you receive one
1415	\l{QEvent::ChildAdded}{ChildAdded} event, zero or more
1416	\l{QEvent::ChildPolished}{ChildPolished} events, and one
1417	\l{QEvent::ChildRemoved}{ChildRemoved} event.
1418
1419	The \l{QEvent::ChildPolished}{ChildPolished} event is omitted if
1420	a child is removed immediately after it is added. If a child is
1421	polished several times during construction and destruction, you
1422	may receive several child polished events for the same child,
1423	each time with a different virtual table.
1424
1425	\sa event()
1426	*/
1427
1428	void QObject::childEvent(QChildEvent * /* event */)
1429	{
1430	}
1431
1432
1433	/*!
1434	This event handler can be reimplemented in a subclass to receive
1435	custom events. Custom events are user-defined events with a type
1436	value at least as large as the QEvent::User item of the
1437	QEvent::Type enum, and is typically a QEvent subclass. The event
1438	is passed in the \a event parameter.
1439
1440	\sa event(), QEvent
1441	*/
1442	void QObject::customEvent(QEvent * /* event */)
1443	{
1444	}
1445
1446
1447
1448	/*!
1449	Filters events if this object has been installed as an event
1450	filter for the \a watched object.
1451
1452	In your reimplementation of this function, if you want to filter
1453	the \a event out, i.e. stop it being handled further, return
1454	true; otherwise return false.
1455
1456	Example:
1457	\snippet code/src_corelib_kernel_qobject.cpp 6
1458
1459	Notice in the example above that unhandled events are passed to
1460	the base class's eventFilter() function, since the base class
1461	might have reimplemented eventFilter() for its own internal
1462	purposes.
1463
1464	Some events, such as \l QEvent::ShortcutOverride must be explicitly
1465	accepted (by calling \l {QEvent::}{accept()} on them) in order to prevent
1466	propagation.
1467
1468	\warning If you delete the receiver object in this function, be
1469	sure to return true. Otherwise, Qt will forward the event to the
1470	deleted object and the program might crash.
1471
1472	\sa installEventFilter()
1473	*/
1474
1475	bool QObject::eventFilter(QObject * /* watched */, QEvent * /* event */)
1476	{
1477	return false;
1478	}
1479
1480	/*!
1481	\fn bool QObject::signalsBlocked() const
1482
1483	Returns \c true if signals are blocked; otherwise returns \c false.
1484
1485	Signals are not blocked by default.
1486
1487	\sa blockSignals(), QSignalBlocker
1488	*/
1489
1490	/*!
1491	If \a block is true, signals emitted by this object are blocked
1492	(i.e., emitting a signal will not invoke anything connected to it).
1493	If \a block is false, no such blocking will occur.
1494
1495	The return value is the previous value of signalsBlocked().
1496
1497	Note that the destroyed() signal will be emitted even if the signals
1498	for this object have been blocked.
1499
1500	Signals emitted while being blocked are not buffered.
1501
1502	\sa signalsBlocked(), QSignalBlocker
1503	*/
1504
1505	bool QObject::blockSignals(bool block) noexcept
1506	{
1507	Q_D(QObject);
1508	bool previous = d->blockSig;
1509	d->blockSig = block;
1510	return previous;
1511	}
1512
1513	/*!
1514	Returns the thread in which the object lives.
1515
1516	\sa moveToThread()
1517	*/
1518	QThread *QObject::thread() const
1519	{
1520	return d_func()->threadData.loadRelaxed()->thread.loadAcquire();
1521	}
1522
1523	/*!
1524	Changes the thread affinity for this object and its children. The
1525	object cannot be moved if it has a parent. Event processing will
1526	continue in the \a targetThread.
1527
1528	To move an object to the main thread, use QApplication::instance()
1529	to retrieve a pointer to the current application, and then use
1530	QApplication::thread() to retrieve the thread in which the
1531	application lives. For example:
1532
1533	\snippet code/src_corelib_kernel_qobject.cpp 7
1534
1535	If \a targetThread is \nullptr, all event processing for this object
1536	and its children stops, as they are no longer associated with any
1537	thread.
1538
1539	Note that all active timers for the object will be reset. The
1540	timers are first stopped in the current thread and restarted (with
1541	the same interval) in the \a targetThread. As a result, constantly
1542	moving an object between threads can postpone timer events
1543	indefinitely.
1544
1545	A QEvent::ThreadChange event is sent to this object just before
1546	the thread affinity is changed. You can handle this event to
1547	perform any special processing. Note that any new events that are
1548	posted to this object will be handled in the \a targetThread,
1549	provided it is not \nullptr: when it is \nullptr, no event processing
1550	for this object or its children can happen, as they are no longer
1551	associated with any thread.
1552
1553	\warning This function is \e not thread-safe; the current thread
1554	must be same as the current thread affinity. In other words, this
1555	function can only "push" an object from the current thread to
1556	another thread, it cannot "pull" an object from any arbitrary
1557	thread to the current thread. There is one exception to this rule
1558	however: objects with no thread affinity can be "pulled" to the
1559	current thread.
1560
1561	\sa thread()
1562	*/
1563	void QObject::moveToThread(QThread *targetThread)
1564	{
1565	Q_D(QObject);
1566
1567	if (d->threadData.loadRelaxed()->thread.loadAcquire() == targetThread) {
1568	// object is already in this thread
1569	return;
1570	}
1571
1572	if (d->parent != nullptr) {
1573	qWarning(msg: "QObject::moveToThread: Cannot move objects with a parent");
1574	return;
1575	}
1576	if (d->isWidget) {
1577	qWarning(msg: "QObject::moveToThread: Widgets cannot be moved to a new thread");
1578	return;
1579	}
1580
1581	QThreadData *currentData = QThreadData::current();
1582	QThreadData *targetData = targetThread ? QThreadData::get2(thread: targetThread) : nullptr;
1583	QThreadData *thisThreadData = d->threadData.loadRelaxed();
1584	if (!thisThreadData->thread.loadAcquire() && currentData == targetData) {
1585	// one exception to the rule: we allow moving objects with no thread affinity to the current thread
1586	currentData = d->threadData;
1587	} else if (thisThreadData != currentData) {
1588	qWarning(msg: "QObject::moveToThread: Current thread (%p) is not the object's thread (%p).\n"
1589	"Cannot move to target thread (%p)\n",
1590	currentData->thread.loadRelaxed(), thisThreadData->thread.loadRelaxed(), targetData ? targetData->thread.loadRelaxed() : nullptr);
1591
1592	#ifdef Q_OS_MAC
1593	qWarning("You might be loading two sets of Qt binaries into the same process. "
1594	"Check that all plugins are compiled against the right Qt binaries. Export "
1595	"DYLD_PRINT_LIBRARIES=1 and check that only one set of binaries are being loaded.");
1596	#endif
1597
1598	return;
1599	}
1600
1601	// prepare to move
1602	d->moveToThread_helper();
1603
1604	if (!targetData)
1605	targetData = new QThreadData(0);
1606
1607	// make sure nobody adds/removes connections to this object while we're moving it
1608	QMutexLocker l(signalSlotLock(o: this));
1609
1610	QOrderedMutexLocker locker(&currentData->postEventList.mutex,
1611	&targetData->postEventList.mutex);
1612
1613	// keep currentData alive (since we've got it locked)
1614	currentData->ref();
1615
1616	// move the object
1617	d_func()->setThreadData_helper(currentData, targetData);
1618
1619	locker.unlock();
1620
1621	// now currentData can commit suicide if it wants to
1622	currentData->deref();
1623	}
1624
1625	void QObjectPrivate::moveToThread_helper()
1626	{
1627	Q_Q(QObject);
1628	QEvent e(QEvent::ThreadChange);
1629	QCoreApplication::sendEvent(receiver: q, event: &e);
1630	for (int i = 0; i < children.size(); ++i) {
1631	QObject *child = children.at(i);
1632	child->d_func()->moveToThread_helper();
1633	}
1634	}
1635
1636	void QObjectPrivate::setThreadData_helper(QThreadData *currentData, QThreadData *targetData)
1637	{
1638	Q_Q(QObject);
1639
1640	// move posted events
1641	int eventsMoved = 0;
1642	for (int i = 0; i < currentData->postEventList.size(); ++i) {
1643	const QPostEvent &pe = currentData->postEventList.at(i);
1644	if (!pe.event)
1645	continue;
1646	if (pe.receiver == q) {
1647	// move this post event to the targetList
1648	targetData->postEventList.addEvent(ev: pe);
1649	const_cast<QPostEvent &>(pe).event = nullptr;
1650	++eventsMoved;
1651	}
1652	}
1653	if (eventsMoved > 0 && targetData->hasEventDispatcher()) {
1654	targetData->canWait = false;
1655	targetData->eventDispatcher.loadRelaxed()->wakeUp();
1656	}
1657
1658	// the current emitting thread shouldn't restore currentSender after calling moveToThread()
1659	ConnectionData *cd = connections.loadRelaxed();
1660	if (cd) {
1661	if (cd->currentSender) {
1662	cd->currentSender->receiverDeleted();
1663	cd->currentSender = nullptr;
1664	}
1665
1666	// adjust the receiverThreadId values in the Connections
1667	if (cd) {
1668	auto *c = cd->senders;
1669	while (c) {
1670	QObject *r = c->receiver.loadRelaxed();
1671	if (r) {
1672	Q_ASSERT(r == q);
1673	targetData->ref();
1674	QThreadData *old = c->receiverThreadData.loadRelaxed();
1675	if (old)
1676	old->deref();
1677	c->receiverThreadData.storeRelaxed(newValue: targetData);
1678	}
1679	c = c->next;
1680	}
1681	}
1682
1683	}
1684
1685	// set new thread data
1686	targetData->ref();
1687	threadData.loadRelaxed()->deref();
1688
1689	// synchronizes with loadAcquire e.g. in QCoreApplication::postEvent
1690	threadData.storeRelease(newValue: targetData);
1691
1692	for (int i = 0; i < children.size(); ++i) {
1693	QObject *child = children.at(i);
1694	child->d_func()->setThreadData_helper(currentData, targetData);
1695	}
1696	}
1697
1698	void QObjectPrivate::_q_reregisterTimers(void *pointer)
1699	{
1700	Q_Q(QObject);
1701	QList<QAbstractEventDispatcher::TimerInfo> *timerList = reinterpret_cast<QList<QAbstractEventDispatcher::TimerInfo> *>(pointer);
1702	QAbstractEventDispatcher *eventDispatcher = threadData.loadRelaxed()->eventDispatcher.loadRelaxed();
1703	for (int i = 0; i < timerList->size(); ++i) {
1704	const QAbstractEventDispatcher::TimerInfo &ti = timerList->at(i);
1705	eventDispatcher->registerTimer(timerId: ti.timerId, interval: ti.interval, timerType: ti.timerType, object: q);
1706	}
1707	delete timerList;
1708	}
1709
1710
1711	//
1712	// The timer flag hasTimer is set when startTimer is called.
1713	// It is not reset when killing the timer because more than
1714	// one timer might be active.
1715	//
1716
1717	/*!
1718	Starts a timer and returns a timer identifier, or returns zero if
1719	it could not start a timer.
1720
1721	A timer event will occur every \a interval milliseconds until
1722	killTimer() is called. If \a interval is 0, then the timer event
1723	occurs once every time there are no more window system events to
1724	process.
1725
1726	The virtual timerEvent() function is called with the QTimerEvent
1727	event parameter class when a timer event occurs. Reimplement this
1728	function to get timer events.
1729
1730	If multiple timers are running, the QTimerEvent::timerId() can be
1731	used to find out which timer was activated.
1732
1733	Example:
1734
1735	\snippet code/src_corelib_kernel_qobject.cpp 8
1736
1737	Note that QTimer's accuracy depends on the underlying operating system and
1738	hardware. The \a timerType argument allows you to customize the accuracy of
1739	the timer. See Qt::TimerType for information on the different timer types.
1740	Most platforms support an accuracy of 20 milliseconds; some provide more.
1741	If Qt is unable to deliver the requested number of timer events, it will
1742	silently discard some.
1743
1744	The QTimer class provides a high-level programming interface with
1745	single-shot timers and timer signals instead of events. There is
1746	also a QBasicTimer class that is more lightweight than QTimer and
1747	less clumsy than using timer IDs directly.
1748
1749	\sa timerEvent(), killTimer(), QTimer::singleShot()
1750	*/
1751
1752	int QObject::startTimer(int interval, Qt::TimerType timerType)
1753	{
1754	Q_D(QObject);
1755
1756	if (Q_UNLIKELY(interval < 0)) {
1757	qWarning(msg: "QObject::startTimer: Timers cannot have negative intervals");
1758	return 0;
1759	}
1760
1761	auto thisThreadData = d->threadData.loadRelaxed();
1762	if (Q_UNLIKELY(!thisThreadData->hasEventDispatcher())) {
1763	qWarning(msg: "QObject::startTimer: Timers can only be used with threads started with QThread");
1764	return 0;
1765	}
1766	if (Q_UNLIKELY(thread() != QThread::currentThread())) {
1767	qWarning(msg: "QObject::startTimer: Timers cannot be started from another thread");
1768	return 0;
1769	}
1770	int timerId = thisThreadData->eventDispatcher.loadRelaxed()->registerTimer(interval, timerType, object: this);
1771	if (!d->extraData)
1772	d->extraData = new QObjectPrivate::ExtraData;
1773	d->extraData->runningTimers.append(t: timerId);
1774	return timerId;
1775	}
1776
1777	/*!
1778	\since 5.9
1779	\overload
1780	\fn int QObject::startTimer(std::chrono::milliseconds time, Qt::TimerType timerType)
1781
1782	Starts a timer and returns a timer identifier, or returns zero if
1783	it could not start a timer.
1784
1785	A timer event will occur every \a time interval until killTimer()
1786	is called. If \a time is equal to \c{std::chrono::duration::zero()},
1787	then the timer event occurs once every time there are no more window
1788	system events to process.
1789
1790	The virtual timerEvent() function is called with the QTimerEvent
1791	event parameter class when a timer event occurs. Reimplement this
1792	function to get timer events.
1793
1794	If multiple timers are running, the QTimerEvent::timerId() can be
1795	used to find out which timer was activated.
1796
1797	Example:
1798
1799	\snippet code/src_corelib_kernel_qobject.cpp 8
1800
1801	Note that QTimer's accuracy depends on the underlying operating system and
1802	hardware. The \a timerType argument allows you to customize the accuracy of
1803	the timer. See Qt::TimerType for information on the different timer types.
1804	Most platforms support an accuracy of 20 milliseconds; some provide more.
1805	If Qt is unable to deliver the requested number of timer events, it will
1806	silently discard some.
1807
1808	The QTimer class provides a high-level programming interface with
1809	single-shot timers and timer signals instead of events. There is
1810	also a QBasicTimer class that is more lightweight than QTimer and
1811	less clumsy than using timer IDs directly.
1812
1813	\sa timerEvent(), killTimer(), QTimer::singleShot()
1814	*/
1815
1816	/*!
1817	Kills the timer with timer identifier, \a id.
1818
1819	The timer identifier is returned by startTimer() when a timer
1820	event is started.
1821
1822	\sa timerEvent(), startTimer()
1823	*/
1824
1825	void QObject::killTimer(int id)
1826	{
1827	Q_D(QObject);
1828	if (Q_UNLIKELY(thread() != QThread::currentThread())) {
1829	qWarning(msg: "QObject::killTimer: Timers cannot be stopped from another thread");
1830	return;
1831	}
1832	if (id) {
1833	int at = d->extraData ? d->extraData->runningTimers.indexOf(t: id) : -1;
1834	if (at == -1) {
1835	// timer isn't owned by this object
1836	qWarning(msg: "QObject::killTimer(): Error: timer id %d is not valid for object %p (%s, %ls), timer has not been killed",
1837	id,
1838	this,
1839	metaObject()->className(),
1840	qUtf16Printable(objectName()));
1841	return;
1842	}
1843
1844	auto thisThreadData = d->threadData.loadRelaxed();
1845	if (thisThreadData->hasEventDispatcher())
1846	thisThreadData->eventDispatcher.loadRelaxed()->unregisterTimer(timerId: id);
1847
1848	d->extraData->runningTimers.remove(i: at);
1849	QAbstractEventDispatcherPrivate::releaseTimerId(id);
1850	}
1851	}
1852
1853
1854	/*!
1855	\fn QObject *QObject::parent() const
1856
1857	Returns a pointer to the parent object.
1858
1859	\sa children()
1860	*/
1861
1862	/*!
1863	\fn const QObjectList &QObject::children() const
1864
1865	Returns a list of child objects.
1866	The QObjectList class is defined in the \c{<QObject>} header
1867	file as the following:
1868
1869	\quotefromfile kernel/qobject.h
1870	\skipto /typedef .*QObjectList/
1871	\printuntil QObjectList
1872
1873	The first child added is the \l{QList::first()}{first} object in
1874	the list and the last child added is the \l{QList::last()}{last}
1875	object in the list, i.e. new children are appended at the end.
1876
1877	Note that the list order changes when QWidget children are
1878	\l{QWidget::raise()}{raised} or \l{QWidget::lower()}{lowered}. A
1879	widget that is raised becomes the last object in the list, and a
1880	widget that is lowered becomes the first object in the list.
1881
1882	\sa findChild(), findChildren(), parent(), setParent()
1883	*/
1884
1885
1886	/*!
1887	\fn template<typename T> T *QObject::findChild(const QString &name, Qt::FindChildOptions options) const
1888
1889	Returns the child of this object that can be cast into type T and
1890	that is called \a name, or \nullptr if there is no such object.
1891	Omitting the \a name argument causes all object names to be matched.
1892	The search is performed recursively, unless \a options specifies the
1893	option FindDirectChildrenOnly.
1894
1895	If there is more than one child matching the search, the most
1896	direct ancestor is returned. If there are several direct
1897	ancestors, it is undefined which one will be returned. In that
1898	case, findChildren() should be used.
1899
1900	This example returns a child \c{QPushButton} of \c{parentWidget}
1901	named \c{"button1"}, even if the button isn't a direct child of
1902	the parent:
1903
1904	\snippet code/src_corelib_kernel_qobject.cpp 10
1905
1906	This example returns a \c{QListWidget} child of \c{parentWidget}:
1907
1908	\snippet code/src_corelib_kernel_qobject.cpp 11
1909
1910	This example returns a child \c{QPushButton} of \c{parentWidget}
1911	(its direct parent) named \c{"button1"}:
1912
1913	\snippet code/src_corelib_kernel_qobject.cpp 41
1914
1915	This example returns a \c{QListWidget} child of \c{parentWidget},
1916	its direct parent:
1917
1918	\snippet code/src_corelib_kernel_qobject.cpp 42
1919
1920	\sa findChildren()
1921	*/
1922
1923	/*!
1924	\fn template<typename T> QList<T> QObject::findChildren(const QString &name, Qt::FindChildOptions options) const
1925
1926	Returns all children of this object with the given \a name that can be
1927	cast to type T, or an empty list if there are no such objects.
1928	Omitting the \a name argument causes all object names to be matched.
1929	The search is performed recursively, unless \a options specifies the
1930	option FindDirectChildrenOnly.
1931
1932	The following example shows how to find a list of child \c{QWidget}s of
1933	the specified \c{parentWidget} named \c{widgetname}:
1934
1935	\snippet code/src_corelib_kernel_qobject.cpp 12
1936
1937	This example returns all \c{QPushButton}s that are children of \c{parentWidget}:
1938
1939	\snippet code/src_corelib_kernel_qobject.cpp 13
1940
1941	This example returns all \c{QPushButton}s that are immediate children of \c{parentWidget}:
1942
1943	\snippet code/src_corelib_kernel_qobject.cpp 43
1944
1945	\sa findChild()
1946	*/
1947
1948	/*!
1949	\fn template<typename T> QList<T> QObject::findChildren(const QRegExp &regExp, Qt::FindChildOptions options) const
1950	\overload findChildren()
1951	\obsolete
1952
1953	Returns the children of this object that can be cast to type T
1954	and that have names matching the regular expression \a regExp,
1955	or an empty list if there are no such objects.
1956	The search is performed recursively, unless \a options specifies the
1957	option FindDirectChildrenOnly.
1958
1959	Use the findChildren overload taking a QRegularExpression instead.
1960	*/
1961
1962	/*!
1963	\fn QList<T> QObject::findChildren(const QRegularExpression &re, Qt::FindChildOptions options) const
1964	\overload findChildren()
1965
1966	\since 5.0
1967
1968	Returns the children of this object that can be cast to type T
1969	and that have names matching the regular expression \a re,
1970	or an empty list if there are no such objects.
1971	The search is performed recursively, unless \a options specifies the
1972	option FindDirectChildrenOnly.
1973	*/
1974
1975	/*!
1976	\fn template<typename T> T qFindChild(const QObject *obj, const QString &name)
1977	\relates QObject
1978	\overload qFindChildren()
1979	\obsolete
1980
1981	This function is equivalent to
1982	\a{obj}->\l{QObject::findChild()}{findChild}<T>(\a name).
1983
1984	\note This function was provided as a workaround for MSVC 6
1985	which did not support member template functions. It is advised
1986	to use the other form in new code.
1987
1988	\sa QObject::findChild()
1989	*/
1990
1991	/*!
1992	\fn template<typename T> QList<T> qFindChildren(const QObject *obj, const QString &name)
1993	\relates QObject
1994	\overload qFindChildren()
1995	\obsolete
1996
1997	This function is equivalent to
1998	\a{obj}->\l{QObject::findChildren()}{findChildren}<T>(\a name).
1999
2000	\note This function was provided as a workaround for MSVC 6
2001	which did not support member template functions. It is advised
2002	to use the other form in new code.
2003
2004	\sa QObject::findChildren()
2005	*/
2006
2007	/*!
2008	\fn template<typename T> QList<T> qFindChildren(const QObject *obj, const QRegExp &regExp)
2009	\relates QObject
2010	\overload qFindChildren()
2011
2012	This function is equivalent to
2013	\a{obj}->\l{QObject::findChildren()}{findChildren}<T>(\a regExp).
2014
2015	\note This function was provided as a workaround for MSVC 6
2016	which did not support member template functions. It is advised
2017	to use the other form in new code.
2018
2019	\sa QObject::findChildren()
2020	*/
2021
2022	/*!
2023	\internal
2024	*/
2025	void qt_qFindChildren_helper(const QObject *parent, const QString &name,
2026	const QMetaObject &mo, QList<void*> *list, Qt::FindChildOptions options)
2027	{
2028	if (!parent || !list)
2029	return;
2030	const QObjectList &children = parent->children();
2031	QObject *obj;
2032	for (int i = 0; i < children.size(); ++i) {
2033	obj = children.at(i);
2034	if (mo.cast(obj)) {
2035	if (name.isNull() || obj->objectName() == name)
2036	list->append(t: obj);
2037	}
2038	if (options & Qt::FindChildrenRecursively)
2039	qt_qFindChildren_helper(parent: obj, name, mo, list, options);
2040	}
2041	}
2042
2043	#ifndef QT_NO_REGEXP
2044	/*!
2045	\internal
2046	*/
2047	void qt_qFindChildren_helper(const QObject *parent, const QRegExp &re,
2048	const QMetaObject &mo, QList<void*> *list, Qt::FindChildOptions options)
2049	{
2050	if (!parent || !list)
2051	return;
2052	const QObjectList &children = parent->children();
2053	QRegExp reCopy = re;
2054	QObject *obj;
2055	for (int i = 0; i < children.size(); ++i) {
2056	obj = children.at(i);
2057	if (mo.cast(obj) && reCopy.indexIn(str: obj->objectName()) != -1)
2058	list->append(t: obj);
2059
2060	if (options & Qt::FindChildrenRecursively)
2061	qt_qFindChildren_helper(parent: obj, re, mo, list, options);
2062	}
2063	}
2064	#endif // QT_NO_REGEXP
2065
2066	#if QT_CONFIG(regularexpression)
2067	/*!
2068	\internal
2069	*/
2070	void qt_qFindChildren_helper(const QObject *parent, const QRegularExpression &re,
2071	const QMetaObject &mo, QList<void*> *list, Qt::FindChildOptions options)
2072	{
2073	if (!parent || !list)
2074	return;
2075	const QObjectList &children = parent->children();
2076	QObject *obj;
2077	for (int i = 0; i < children.size(); ++i) {
2078	obj = children.at(i);
2079	if (mo.cast(obj)) {
2080	QRegularExpressionMatch m = re.match(subject: obj->objectName());
2081	if (m.hasMatch())
2082	list->append(t: obj);
2083	}
2084	if (options & Qt::FindChildrenRecursively)
2085	qt_qFindChildren_helper(parent: obj, re, mo, list, options);
2086	}
2087	}
2088	#endif // QT_CONFIG(regularexpression)
2089
2090	/*!
2091	\internal
2092	*/
2093	QObject *qt_qFindChild_helper(const QObject *parent, const QString &name, const QMetaObject &mo, Qt::FindChildOptions options)
2094	{
2095	if (!parent)
2096	return nullptr;
2097	const QObjectList &children = parent->children();
2098	QObject *obj;
2099	int i;
2100	for (i = 0; i < children.size(); ++i) {
2101	obj = children.at(i);
2102	if (mo.cast(obj) && (name.isNull() || obj->objectName() == name))
2103	return obj;
2104	}
2105	if (options & Qt::FindChildrenRecursively) {
2106	for (i = 0; i < children.size(); ++i) {
2107	obj = qt_qFindChild_helper(parent: children.at(i), name, mo, options);
2108	if (obj)
2109	return obj;
2110	}
2111	}
2112	return nullptr;
2113	}
2114
2115	/*!
2116	Makes the object a child of \a parent.
2117
2118	\sa parent(), children()
2119	*/
2120	void QObject::setParent(QObject *parent)
2121	{
2122	Q_D(QObject);
2123	Q_ASSERT(!d->isWidget);
2124	d->setParent_helper(parent);
2125	}
2126
2127	void QObjectPrivate::deleteChildren()
2128	{
2129	Q_ASSERT_X(!isDeletingChildren, "QObjectPrivate::deleteChildren()", "isDeletingChildren already set, did this function recurse?");
2130	isDeletingChildren = true;
2131	// delete children objects
2132	// don't use qDeleteAll as the destructor of the child might
2133	// delete siblings
2134	for (int i = 0; i < children.count(); ++i) {
2135	currentChildBeingDeleted = children.at(i);
2136	children[i] = 0;
2137	delete currentChildBeingDeleted;
2138	}
2139	children.clear();
2140	currentChildBeingDeleted = nullptr;
2141	isDeletingChildren = false;
2142	}
2143
2144	void QObjectPrivate::setParent_helper(QObject *o)
2145	{
2146	Q_Q(QObject);
2147	Q_ASSERT_X(q != o, Q_FUNC_INFO, "Cannot parent a QObject to itself");
2148	#ifdef QT_DEBUG
2149	const auto checkForParentChildLoops = qScopeGuard(f: [&](){
2150	int depth = 0;
2151	auto p = parent;
2152	while (p) {
2153	if (++depth == CheckForParentChildLoopsWarnDepth) {
2154	qWarning(msg: "QObject %p (class: '%s', object name: '%s') may have a loop in its parent-child chain; "
2155	"this is undefined behavior",
2156	q, q->metaObject()->className(), qPrintable(q->objectName()));
2157	}
2158	p = p->parent();
2159	}
2160	});
2161	#endif
2162
2163	if (o == parent)
2164	return;
2165
2166	if (parent) {
2167	QObjectPrivate *parentD = parent->d_func();
2168	if (parentD->isDeletingChildren && wasDeleted
2169	&& parentD->currentChildBeingDeleted == q) {
2170	// don't do anything since QObjectPrivate::deleteChildren() already
2171	// cleared our entry in parentD->children.
2172	} else {
2173	const int index = parentD->children.indexOf(t: q);
2174	if (index < 0) {
2175	// we're probably recursing into setParent() from a ChildRemoved event, don't do anything
2176	} else if (parentD->isDeletingChildren) {
2177	parentD->children[index] = 0;
2178	} else {
2179	parentD->children.removeAt(i: index);
2180	if (sendChildEvents && parentD->receiveChildEvents) {
2181	QChildEvent e(QEvent::ChildRemoved, q);
2182	QCoreApplication::sendEvent(receiver: parent, event: &e);
2183	}
2184	}
2185	}
2186	}
2187	parent = o;
2188	if (parent) {
2189	// object hierarchies are constrained to a single thread
2190	if (threadData != parent->d_func()->threadData) {
2191	qWarning(msg: "QObject::setParent: Cannot set parent, new parent is in a different thread");
2192	parent = nullptr;
2193	return;
2194	}
2195	parent->d_func()->children.append(t: q);
2196	if(sendChildEvents && parent->d_func()->receiveChildEvents) {
2197	if (!isWidget) {
2198	QChildEvent e(QEvent::ChildAdded, q);
2199	QCoreApplication::sendEvent(receiver: parent, event: &e);
2200	}
2201	}
2202	}
2203	if (!wasDeleted && !isDeletingChildren && declarativeData && QAbstractDeclarativeData::parentChanged)
2204	QAbstractDeclarativeData::parentChanged(declarativeData, q, o);
2205	}
2206
2207	/*!
2208	\fn void QObject::installEventFilter(QObject *filterObj)
2209
2210	Installs an event filter \a filterObj on this object. For example:
2211	\snippet code/src_corelib_kernel_qobject.cpp 14
2212
2213	An event filter is an object that receives all events that are
2214	sent to this object. The filter can either stop the event or
2215	forward it to this object. The event filter \a filterObj receives
2216	events via its eventFilter() function. The eventFilter() function
2217	must return true if the event should be filtered, (i.e. stopped);
2218	otherwise it must return false.
2219
2220	If multiple event filters are installed on a single object, the
2221	filter that was installed last is activated first.
2222
2223	Here's a \c KeyPressEater class that eats the key presses of its
2224	monitored objects:
2225
2226	\snippet code/src_corelib_kernel_qobject.cpp 15
2227
2228	And here's how to install it on two widgets:
2229
2230	\snippet code/src_corelib_kernel_qobject.cpp 16
2231
2232	The QShortcut class, for example, uses this technique to intercept
2233	shortcut key presses.
2234
2235	\warning If you delete the receiver object in your eventFilter()
2236	function, be sure to return true. If you return false, Qt sends
2237	the event to the deleted object and the program will crash.
2238
2239	Note that the filtering object must be in the same thread as this
2240	object. If \a filterObj is in a different thread, this function does
2241	nothing. If either \a filterObj or this object are moved to a different
2242	thread after calling this function, the event filter will not be
2243	called until both objects have the same thread affinity again (it
2244	is \e not removed).
2245
2246	\sa removeEventFilter(), eventFilter(), event()
2247	*/
2248
2249	void QObject::installEventFilter(QObject *obj)
2250	{
2251	Q_D(QObject);
2252	if (!obj)
2253	return;
2254	if (d->threadData != obj->d_func()->threadData) {
2255	qWarning(msg: "QObject::installEventFilter(): Cannot filter events for objects in a different thread.");
2256	return;
2257	}
2258
2259	if (!d->extraData)
2260	d->extraData = new QObjectPrivate::ExtraData;
2261
2262	// clean up unused items in the list
2263	d->extraData->eventFilters.removeAll(t: (QObject*)nullptr);
2264	d->extraData->eventFilters.removeAll(t: obj);
2265	d->extraData->eventFilters.prepend(t: obj);
2266	}
2267
2268	/*!
2269	Removes an event filter object \a obj from this object. The
2270	request is ignored if such an event filter has not been installed.
2271
2272	All event filters for this object are automatically removed when
2273	this object is destroyed.
2274
2275	It is always safe to remove an event filter, even during event
2276	filter activation (i.e. from the eventFilter() function).
2277
2278	\sa installEventFilter(), eventFilter(), event()
2279	*/
2280
2281	void QObject::removeEventFilter(QObject *obj)
2282	{
2283	Q_D(QObject);
2284	if (d->extraData) {
2285	for (int i = 0; i < d->extraData->eventFilters.count(); ++i) {
2286	if (d->extraData->eventFilters.at(i) == obj)
2287	d->extraData->eventFilters[i] = nullptr;
2288	}
2289	}
2290	}
2291
2292
2293	/*!
2294	\fn void QObject::destroyed(QObject *obj)
2295
2296	This signal is emitted immediately before the object \a obj is
2297	destroyed, after any instances of QPointer have been notified,
2298	and cannot be blocked.
2299
2300	All the objects's children are destroyed immediately after this
2301	signal is emitted.
2302
2303	\sa deleteLater(), QPointer
2304	*/
2305
2306	/*!
2307	\threadsafe
2308
2309	Schedules this object for deletion.
2310
2311	The object will be deleted when control returns to the event
2312	loop. If the event loop is not running when this function is
2313	called (e.g. deleteLater() is called on an object before
2314	QCoreApplication::exec()), the object will be deleted once the
2315	event loop is started. If deleteLater() is called after the main event loop
2316	has stopped, the object will not be deleted.
2317	Since Qt 4.8, if deleteLater() is called on an object that lives in a
2318	thread with no running event loop, the object will be destroyed when the
2319	thread finishes.
2320
2321	Note that entering and leaving a new event loop (e.g., by opening a modal
2322	dialog) will \e not perform the deferred deletion; for the object to be
2323	deleted, the control must return to the event loop from which deleteLater()
2324	was called. This does not apply to objects deleted while a previous, nested
2325	event loop was still running: the Qt event loop will delete those objects
2326	as soon as the new nested event loop starts.
2327
2328	\note It is safe to call this function more than once; when the
2329	first deferred deletion event is delivered, any pending events for the
2330	object are removed from the event queue.
2331
2332	\sa destroyed(), QPointer
2333	*/
2334	void QObject::deleteLater()
2335	{
2336	#ifdef QT_DEBUG
2337	if (qApp == this)
2338	qWarning(msg: "You are deferring the delete of QCoreApplication, this may not work as expected.");
2339	#endif
2340	QCoreApplication::postEvent(receiver: this, event: new QDeferredDeleteEvent());
2341	}
2342
2343	/*!
2344	\fn QString QObject::tr(const char *sourceText, const char *disambiguation, int n)
2345	\reentrant
2346
2347	Returns a translated version of \a sourceText, optionally based on a
2348	\a disambiguation string and value of \a n for strings containing plurals;
2349	otherwise returns QString::fromUtf8(\a sourceText) if no appropriate
2350	translated string is available.
2351
2352	Example:
2353	\snippet ../widgets/mainwindows/sdi/mainwindow.cpp implicit tr context
2354	\dots
2355
2356	If the same \a sourceText is used in different roles within the
2357	same context, an additional identifying string may be passed in
2358	\a disambiguation (\nullptr by default). In Qt 4.4 and earlier, this was
2359	the preferred way to pass comments to translators.
2360
2361	Example:
2362
2363	\snippet code/src_corelib_kernel_qobject.cpp 17
2364	\dots
2365
2366	See \l{Writing Source Code for Translation} for a detailed description of
2367	Qt's translation mechanisms in general, and the
2368	\l{Writing Source Code for Translation#Disambiguation}{Disambiguation}
2369	section for information on disambiguation.
2370
2371	\warning This method is reentrant only if all translators are
2372	installed \e before calling this method. Installing or removing
2373	translators while performing translations is not supported. Doing
2374	so will probably result in crashes or other undesirable behavior.
2375
2376	\sa QCoreApplication::translate(), {Internationalization with Qt}
2377	*/
2378
2379	/*!
2380	\fn QString QObject::trUtf8(const char *sourceText, const char *disambiguation, int n)
2381	\reentrant
2382	\obsolete
2383
2384	Returns a translated version of \a sourceText, or
2385	QString::fromUtf8(\a sourceText) if there is no appropriate
2386	version. It is otherwise identical to tr(\a sourceText, \a
2387	disambiguation, \a n).
2388
2389	\warning This method is reentrant only if all translators are
2390	installed \e before calling this method. Installing or removing
2391	translators while performing translations is not supported. Doing
2392	so will probably result in crashes or other undesirable behavior.
2393
2394	\warning For portability reasons, we recommend that you use
2395	escape sequences for specifying non-ASCII characters in string
2396	literals to trUtf8(). For example:
2397
2398	\snippet code/src_corelib_kernel_qobject.cpp 20
2399
2400	\sa tr(), QCoreApplication::translate(), {Internationalization with Qt}
2401	*/
2402
2403
2404
2405
2406	/*****************************************************************************
2407	Signals and slots
2408	*****************************************************************************/
2409
2410
2411	const char *qFlagLocation(const char *method)
2412	{
2413	QThreadData *currentThreadData = QThreadData::current(createIfNecessary: false);
2414	if (currentThreadData != nullptr)
2415	currentThreadData->flaggedSignatures.store(method);
2416	return method;
2417	}
2418
2419	static int extract_code(const char *member)
2420	{
2421	// extract code, ensure QMETHOD_CODE <= code <= QSIGNAL_CODE
2422	return (((int)(*member) - '0') & 0x3);
2423	}
2424
2425	static const char * extract_location(const char *member)
2426	{
2427	if (QThreadData::current()->flaggedSignatures.contains(method: member)) {
2428	// signature includes location information after the first null-terminator
2429	const char *location = member + qstrlen(str: member) + 1;
2430	if (*location != '\0')
2431	return location;
2432	}
2433	return nullptr;
2434	}
2435
2436	static bool check_signal_macro(const QObject *sender, const char *signal,
2437	const char *func, const char *op)
2438	{
2439	int sigcode = extract_code(member: signal);
2440	if (sigcode != QSIGNAL_CODE) {
2441	if (sigcode == QSLOT_CODE)
2442	qWarning(msg: "QObject::%s: Attempt to %s non-signal %s::%s",
2443	func, op, sender->metaObject()->className(), signal+1);
2444	else
2445	qWarning(msg: "QObject::%s: Use the SIGNAL macro to %s %s::%s",
2446	func, op, sender->metaObject()->className(), signal);
2447	return false;
2448	}
2449	return true;
2450	}
2451
2452	static bool check_method_code(int code, const QObject *object,
2453	const char *method, const char *func)
2454	{
2455	if (code != QSLOT_CODE && code != QSIGNAL_CODE) {
2456	qWarning(msg: "QObject::%s: Use the SLOT or SIGNAL macro to "
2457	"%s %s::%s", func, func, object->metaObject()->className(), method);
2458	return false;
2459	}
2460	return true;
2461	}
2462
2463	static void err_method_notfound(const QObject *object,
2464	const char *method, const char *func)
2465	{
2466	const char *type = "method";
2467	switch (extract_code(member: method)) {
2468	case QSLOT_CODE: type = "slot"; break;
2469	case QSIGNAL_CODE: type = "signal"; break;
2470	}
2471	const char *loc = extract_location(member: method);
2472	if (strchr(s: method,c: ')') == nullptr) // common typing mistake
2473	qWarning(msg: "QObject::%s: Parentheses expected, %s %s::%s%s%s",
2474	func, type, object->metaObject()->className(), method+1,
2475	loc ? " in ": "", loc ? loc : "");
2476	else
2477	qWarning(msg: "QObject::%s: No such %s %s::%s%s%s",
2478	func, type, object->metaObject()->className(), method+1,
2479	loc ? " in ": "", loc ? loc : "");
2480
2481	}
2482
2483
2484	static void err_info_about_objects(const char * func,
2485	const QObject * sender,
2486	const QObject * receiver)
2487	{
2488	QString a = sender ? sender->objectName() : QString();
2489	QString b = receiver ? receiver->objectName() : QString();
2490	if (!a.isEmpty())
2491	qWarning(msg: "QObject::%s: (sender name: '%s')", func, a.toLocal8Bit().data());
2492	if (!b.isEmpty())
2493	qWarning(msg: "QObject::%s: (receiver name: '%s')", func, b.toLocal8Bit().data());
2494	}
2495
2496	/*!
2497	Returns a pointer to the object that sent the signal, if called in
2498	a slot activated by a signal; otherwise it returns \nullptr. The pointer
2499	is valid only during the execution of the slot that calls this
2500	function from this object's thread context.
2501
2502	The pointer returned by this function becomes invalid if the
2503	sender is destroyed, or if the slot is disconnected from the
2504	sender's signal.
2505
2506	\warning This function violates the object-oriented principle of
2507	modularity. However, getting access to the sender might be useful
2508	when many signals are connected to a single slot.
2509
2510	\warning As mentioned above, the return value of this function is
2511	not valid when the slot is called via a Qt::DirectConnection from
2512	a thread different from this object's thread. Do not use this
2513	function in this type of scenario.
2514
2515	\sa senderSignalIndex()
2516	*/
2517
2518	QObject *QObject::sender() const
2519	{
2520	Q_D(const QObject);
2521
2522	QBasicMutexLocker locker(signalSlotLock(o: this));
2523	QObjectPrivate::ConnectionData *cd = d->connections.loadRelaxed();
2524	if (!cd || !cd->currentSender)
2525	return nullptr;
2526
2527	for (QObjectPrivate::Connection *c = cd->senders; c; c = c->next) {
2528	if (c->sender == cd->currentSender->sender)
2529	return cd->currentSender->sender;
2530	}
2531
2532	return nullptr;
2533	}
2534
2535	/*!
2536	\since 4.8
2537
2538	Returns the meta-method index of the signal that called the currently
2539	executing slot, which is a member of the class returned by sender().
2540	If called outside of a slot activated by a signal, -1 is returned.
2541
2542	For signals with default parameters, this function will always return
2543	the index with all parameters, regardless of which was used with
2544	connect(). For example, the signal \c {destroyed(QObject *obj = \nullptr)}
2545	will have two different indexes (with and without the parameter), but
2546	this function will always return the index with a parameter. This does
2547	not apply when overloading signals with different parameters.
2548
2549	\warning This function violates the object-oriented principle of
2550	modularity. However, getting access to the signal index might be useful
2551	when many signals are connected to a single slot.
2552
2553	\warning The return value of this function is not valid when the slot
2554	is called via a Qt::DirectConnection from a thread different from this
2555	object's thread. Do not use this function in this type of scenario.
2556
2557	\sa sender(), QMetaObject::indexOfSignal(), QMetaObject::method()
2558	*/
2559
2560	int QObject::senderSignalIndex() const
2561	{
2562	Q_D(const QObject);
2563
2564	QBasicMutexLocker locker(signalSlotLock(o: this));
2565	QObjectPrivate::ConnectionData *cd = d->connections.loadRelaxed();
2566	if (!cd || !cd->currentSender)
2567	return -1;
2568
2569	for (QObjectPrivate::Connection *c = cd->senders; c; c = c->next) {
2570	if (c->sender == cd->currentSender->sender) {
2571	// Convert from signal range to method range
2572	return QMetaObjectPrivate::signal(m: c->sender->metaObject(), signal_index: cd->currentSender->signal).methodIndex();
2573	}
2574	}
2575
2576	return -1;
2577	}
2578
2579	/*!
2580	Returns the number of receivers connected to the \a signal.
2581
2582	Since both slots and signals can be used as receivers for signals,
2583	and the same connections can be made many times, the number of
2584	receivers is the same as the number of connections made from this
2585	signal.
2586
2587	When calling this function, you can use the \c SIGNAL() macro to
2588	pass a specific signal:
2589
2590	\snippet code/src_corelib_kernel_qobject.cpp 21
2591
2592	\warning This function violates the object-oriented principle of
2593	modularity. However, it might be useful when you need to perform
2594	expensive initialization only if something is connected to a
2595	signal.
2596
2597	\sa isSignalConnected()
2598	*/
2599
2600	int QObject::receivers(const char *signal) const
2601	{
2602	Q_D(const QObject);
2603	int receivers = 0;
2604	if (signal) {
2605	QByteArray signal_name = QMetaObject::normalizedSignature(method: signal);
2606	signal = signal_name;
2607	#ifndef QT_NO_DEBUG
2608	if (!check_signal_macro(sender: this, signal, func: "receivers", op: "bind"))
2609	return 0;
2610	#endif
2611	signal++; // skip code
2612	int signal_index = d->signalIndex(signalName: signal);
2613	if (signal_index < 0) {
2614	#ifndef QT_NO_DEBUG
2615	err_method_notfound(object: this, method: signal-1, func: "receivers");
2616	#endif
2617	return 0;
2618	}
2619
2620	if (!d->isSignalConnected(signalIndex: signal_index))
2621	return receivers;
2622
2623	if (d->declarativeData && QAbstractDeclarativeData::receivers) {
2624	receivers += QAbstractDeclarativeData::receivers(d->declarativeData, this,
2625	signal_index);
2626	}
2627
2628	QObjectPrivate::ConnectionData *cd = d->connections.loadRelaxed();
2629	QBasicMutexLocker locker(signalSlotLock(o: this));
2630	if (cd && signal_index < cd->signalVectorCount()) {
2631	const QObjectPrivate::Connection *c = cd->signalVector.loadRelaxed()->at(i: signal_index).first.loadRelaxed();
2632	while (c) {
2633	receivers += c->receiver.loadRelaxed() ? 1 : 0;
2634	c = c->nextConnectionList.loadRelaxed();
2635	}
2636	}
2637	}
2638	return receivers;
2639	}
2640
2641	/*!
2642	\since 5.0
2643	Returns \c true if the \a signal is connected to at least one receiver,
2644	otherwise returns \c false.
2645
2646	\a signal must be a signal member of this object, otherwise the behaviour
2647	is undefined.
2648
2649	\snippet code/src_corelib_kernel_qobject.cpp 49
2650
2651	As the code snippet above illustrates, you can use this function
2652	to avoid emitting a signal that nobody listens to.
2653
2654	\warning This function violates the object-oriented principle of
2655	modularity. However, it might be useful when you need to perform
2656	expensive initialization only if something is connected to a
2657	signal.
2658	*/
2659	bool QObject::isSignalConnected(const QMetaMethod &signal) const
2660	{
2661	Q_D(const QObject);
2662	if (!signal.mobj)
2663	return false;
2664
2665	Q_ASSERT_X(signal.mobj->cast(this) && signal.methodType() == QMetaMethod::Signal,
2666	"QObject::isSignalConnected" , "the parameter must be a signal member of the object");
2667	uint signalIndex = (signal.handle - QMetaObjectPrivate::get(metaobject: signal.mobj)->methodData)/5;
2668
2669	if (signal.mobj->d.data[signal.handle + 4] & MethodCloned)
2670	signalIndex = QMetaObjectPrivate::originalClone(obj: signal.mobj, local_method_index: signalIndex);
2671
2672	signalIndex += QMetaObjectPrivate::signalOffset(m: signal.mobj);
2673
2674	QBasicMutexLocker locker(signalSlotLock(o: this));
2675	return d->isSignalConnected(signalIndex, checkDeclarative: true);
2676	}
2677
2678	/*!
2679	\internal
2680
2681	This helper function calculates signal and method index for the given
2682	member in the specified class.
2683
2684	\list
2685	\li If member.mobj is \nullptr then both signalIndex and methodIndex are set to -1.
2686
2687	\li If specified member is not a member of obj instance class (or one of
2688	its parent classes) then both signalIndex and methodIndex are set to -1.
2689	\endlist
2690
2691	This function is used by QObject::connect and QObject::disconnect which
2692	are working with QMetaMethod.
2693
2694	\a signalIndex is set to the signal index of member. If the member
2695	specified is not signal this variable is set to -1.
2696
2697	\a methodIndex is set to the method index of the member. If the
2698	member is not a method of the object specified by the \a obj argument this
2699	variable is set to -1.
2700	*/
2701	void QMetaObjectPrivate::memberIndexes(const QObject *obj,
2702	const QMetaMethod &member,
2703	int *signalIndex, int *methodIndex)
2704	{
2705	*signalIndex = -1;
2706	*methodIndex = -1;
2707	if (!obj || !member.mobj)
2708	return;
2709	const QMetaObject *m = obj->metaObject();
2710	// Check that member is member of obj class
2711	while (m != nullptr && m != member.mobj)
2712	m = m->d.superdata;
2713	if (!m)
2714	return;
2715	*signalIndex = *methodIndex = (member.handle - get(metaobject: member.mobj)->methodData)/5;
2716
2717	int signalOffset;
2718	int methodOffset;
2719	computeOffsets(metaobject: m, signalOffset: &signalOffset, methodOffset: &methodOffset);
2720
2721	*methodIndex += methodOffset;
2722	if (member.methodType() == QMetaMethod::Signal) {
2723	*signalIndex = originalClone(obj: m, local_method_index: *signalIndex);
2724	*signalIndex += signalOffset;
2725	} else {
2726	*signalIndex = -1;
2727	}
2728	}
2729
2730	#ifndef QT_NO_DEBUG
2731	static inline void check_and_warn_compat(const QMetaObject *sender, const QMetaMethod &signal,
2732	const QMetaObject *receiver, const QMetaMethod &method)
2733	{
2734	if (signal.attributes() & QMetaMethod::Compatibility) {
2735	if (!(method.attributes() & QMetaMethod::Compatibility))
2736	qWarning(msg: "QObject::connect: Connecting from COMPAT signal (%s::%s)",
2737	sender->className(), signal.methodSignature().constData());
2738	} else if ((method.attributes() & QMetaMethod::Compatibility) &&
2739	method.methodType() == QMetaMethod::Signal) {
2740	qWarning(msg: "QObject::connect: Connecting from %s::%s to COMPAT slot (%s::%s)",
2741	sender->className(), signal.methodSignature().constData(),
2742	receiver->className(), method.methodSignature().constData());
2743	}
2744	}
2745	#endif
2746
2747	/*!
2748	\threadsafe
2749
2750	Creates a connection of the given \a type from the \a signal in
2751	the \a sender object to the \a method in the \a receiver object.
2752	Returns a handle to the connection that can be used to disconnect
2753	it later.
2754
2755	You must use the \c SIGNAL() and \c SLOT() macros when specifying
2756	the \a signal and the \a method, for example:
2757
2758	\snippet code/src_corelib_kernel_qobject.cpp 22
2759
2760	This example ensures that the label always displays the current
2761	scroll bar value. Note that the signal and slots parameters must not
2762	contain any variable names, only the type. E.g. the following would
2763	not work and return false:
2764
2765	\snippet code/src_corelib_kernel_qobject.cpp 23
2766
2767	A signal can also be connected to another signal:
2768
2769	\snippet code/src_corelib_kernel_qobject.cpp 24
2770
2771	In this example, the \c MyWidget constructor relays a signal from
2772	a private member variable, and makes it available under a name
2773	that relates to \c MyWidget.
2774
2775	A signal can be connected to many slots and signals. Many signals
2776	can be connected to one slot.
2777
2778	If a signal is connected to several slots, the slots are activated
2779	in the same order in which the connections were made, when the
2780	signal is emitted.
2781
2782	The function returns a QMetaObject::Connection that represents
2783	a handle to a connection if it successfully
2784	connects the signal to the slot. The connection handle will be invalid
2785	if it cannot create the connection, for example, if QObject is unable
2786	to verify the existence of either \a signal or \a method, or if their
2787	signatures aren't compatible.
2788	You can check if the handle is valid by casting it to a bool.
2789
2790	By default, a signal is emitted for every connection you make;
2791	two signals are emitted for duplicate connections. You can break
2792	all of these connections with a single disconnect() call.
2793	If you pass the Qt::UniqueConnection \a type, the connection will only
2794	be made if it is not a duplicate. If there is already a duplicate
2795	(exact same signal to the exact same slot on the same objects),
2796	the connection will fail and connect will return an invalid QMetaObject::Connection.
2797
2798	\note Qt::UniqueConnections do not work for lambdas, non-member functions
2799	and functors; they only apply to connecting to member functions.
2800
2801	The optional \a type parameter describes the type of connection
2802	to establish. In particular, it determines whether a particular
2803	signal is delivered to a slot immediately or queued for delivery
2804	at a later time. If the signal is queued, the parameters must be
2805	of types that are known to Qt's meta-object system, because Qt
2806	needs to copy the arguments to store them in an event behind the
2807	scenes. If you try to use a queued connection and get the error
2808	message
2809
2810	\snippet code/src_corelib_kernel_qobject.cpp 25
2811
2812	call qRegisterMetaType() to register the data type before you
2813	establish the connection.
2814
2815	\sa disconnect(), sender(), qRegisterMetaType(), Q_DECLARE_METATYPE(),
2816	{Differences between String-Based and Functor-Based Connections}
2817	*/
2818	QMetaObject::Connection QObject::connect(const QObject *sender, const char *signal,
2819	const QObject *receiver, const char *method,
2820	Qt::ConnectionType type)
2821	{
2822	if (sender == nullptr || receiver == nullptr || signal == nullptr || method == nullptr) {
2823	qWarning(msg: "QObject::connect: Cannot connect %s::%s to %s::%s",
2824	sender ? sender->metaObject()->className() : "(nullptr)",
2825	(signal && *signal) ? signal+1 : "(nullptr)",
2826	receiver ? receiver->metaObject()->className() : "(nullptr)",
2827	(method && *method) ? method+1 : "(nullptr)");
2828	return QMetaObject::Connection(nullptr);
2829	}
2830	QByteArray tmp_signal_name;
2831
2832	if (!check_signal_macro(sender, signal, func: "connect", op: "bind"))
2833	return QMetaObject::Connection(nullptr);
2834	const QMetaObject *smeta = sender->metaObject();
2835	const char *signal_arg = signal;
2836	++signal; //skip code
2837	QArgumentTypeArray signalTypes;
2838	Q_ASSERT(QMetaObjectPrivate::get(smeta)->revision >= 7);
2839	QByteArray signalName = QMetaObjectPrivate::decodeMethodSignature(signature: signal, types&: signalTypes);
2840	int signal_index = QMetaObjectPrivate::indexOfSignalRelative(
2841	baseObject: &smeta, name: signalName, argc: signalTypes.size(), types: signalTypes.constData());
2842	if (signal_index < 0) {
2843	// check for normalized signatures
2844	tmp_signal_name = QMetaObject::normalizedSignature(method: signal - 1);
2845	signal = tmp_signal_name.constData() + 1;
2846
2847	signalTypes.clear();
2848	signalName = QMetaObjectPrivate::decodeMethodSignature(signature: signal, types&: signalTypes);
2849	smeta = sender->metaObject();
2850	signal_index = QMetaObjectPrivate::indexOfSignalRelative(
2851	baseObject: &smeta, name: signalName, argc: signalTypes.size(), types: signalTypes.constData());
2852	}
2853	if (signal_index < 0) {
2854	err_method_notfound(object: sender, method: signal_arg, func: "connect");
2855	err_info_about_objects(func: "connect", sender, receiver);
2856	return QMetaObject::Connection(nullptr);
2857	}
2858	signal_index = QMetaObjectPrivate::originalClone(obj: smeta, local_method_index: signal_index);
2859	signal_index += QMetaObjectPrivate::signalOffset(m: smeta);
2860
2861	QByteArray tmp_method_name;
2862	int membcode = extract_code(member: method);
2863
2864	if (!check_method_code(code: membcode, object: receiver, method, func: "connect"))
2865	return QMetaObject::Connection(nullptr);
2866	const char *method_arg = method;
2867	++method; // skip code
2868
2869	QArgumentTypeArray methodTypes;
2870	QByteArray methodName = QMetaObjectPrivate::decodeMethodSignature(signature: method, types&: methodTypes);
2871	const QMetaObject *rmeta = receiver->metaObject();
2872	int method_index_relative = -1;
2873	Q_ASSERT(QMetaObjectPrivate::get(rmeta)->revision >= 7);
2874	switch (membcode) {
2875	case QSLOT_CODE:
2876	method_index_relative = QMetaObjectPrivate::indexOfSlotRelative(
2877	m: &rmeta, name: methodName, argc: methodTypes.size(), types: methodTypes.constData());
2878	break;
2879	case QSIGNAL_CODE:
2880	method_index_relative = QMetaObjectPrivate::indexOfSignalRelative(
2881	baseObject: &rmeta, name: methodName, argc: methodTypes.size(), types: methodTypes.constData());
2882	break;
2883	}
2884	if (method_index_relative < 0) {
2885	// check for normalized methods
2886	tmp_method_name = QMetaObject::normalizedSignature(method);
2887	method = tmp_method_name.constData();
2888
2889	methodTypes.clear();
2890	methodName = QMetaObjectPrivate::decodeMethodSignature(signature: method, types&: methodTypes);
2891	// rmeta may have been modified above
2892	rmeta = receiver->metaObject();
2893	switch (membcode) {
2894	case QSLOT_CODE:
2895	method_index_relative = QMetaObjectPrivate::indexOfSlotRelative(
2896	m: &rmeta, name: methodName, argc: methodTypes.size(), types: methodTypes.constData());
2897	break;
2898	case QSIGNAL_CODE:
2899	method_index_relative = QMetaObjectPrivate::indexOfSignalRelative(
2900	baseObject: &rmeta, name: methodName, argc: methodTypes.size(), types: methodTypes.constData());
2901	break;
2902	}
2903	}
2904
2905	if (method_index_relative < 0) {
2906	err_method_notfound(object: receiver, method: method_arg, func: "connect");
2907	err_info_about_objects(func: "connect", sender, receiver);
2908	return QMetaObject::Connection(nullptr);
2909	}
2910
2911	if (!QMetaObjectPrivate::checkConnectArgs(signalArgc: signalTypes.size(), signalTypes: signalTypes.constData(),
2912	methodArgc: methodTypes.size(), methodTypes: methodTypes.constData())) {
2913	qWarning(msg: "QObject::connect: Incompatible sender/receiver arguments"
2914	"\n %s::%s --> %s::%s",
2915	sender->metaObject()->className(), signal,
2916	receiver->metaObject()->className(), method);
2917	return QMetaObject::Connection(nullptr);
2918	}
2919
2920	int *types = nullptr;
2921	if ((type == Qt::QueuedConnection)
2922	&& !(types = queuedConnectionTypes(argumentTypes: signalTypes.constData(), argc: signalTypes.size()))) {
2923	return QMetaObject::Connection(nullptr);
2924	}
2925
2926	#ifndef QT_NO_DEBUG
2927	QMetaMethod smethod = QMetaObjectPrivate::signal(m: smeta, signal_index);
2928	QMetaMethod rmethod = rmeta->method(index: method_index_relative + rmeta->methodOffset());
2929	check_and_warn_compat(sender: smeta, signal: smethod, receiver: rmeta, method: rmethod);
2930	#endif
2931	QMetaObject::Connection handle = QMetaObject::Connection(QMetaObjectPrivate::connect(
2932	sender, signal_index, smeta, receiver, method_index_relative, rmeta ,type, types));
2933	return handle;
2934	}
2935
2936	/*!
2937	\since 4.8
2938
2939	Creates a connection of the given \a type from the \a signal in
2940	the \a sender object to the \a method in the \a receiver object.
2941	Returns a handle to the connection that can be used to disconnect
2942	it later.
2943
2944	The Connection handle will be invalid if it cannot create the
2945	connection, for example, the parameters were invalid.
2946	You can check if the QMetaObject::Connection is valid by casting it to a bool.
2947
2948	This function works in the same way as
2949	\c {connect(const QObject *sender, const char *signal,
2950	const QObject *receiver, const char *method,
2951	Qt::ConnectionType type)}
2952	but it uses QMetaMethod to specify signal and method.
2953
2954	\sa connect(const QObject *sender, const char *signal, const QObject *receiver, const char *method, Qt::ConnectionType type)
2955	*/
2956	QMetaObject::Connection QObject::connect(const QObject *sender, const QMetaMethod &signal,
2957	const QObject *receiver, const QMetaMethod &method,
2958	Qt::ConnectionType type)
2959	{
2960	if (sender == nullptr
2961	|| receiver == nullptr
2962	|| signal.methodType() != QMetaMethod::Signal
2963	|| method.methodType() == QMetaMethod::Constructor) {
2964	qWarning(msg: "QObject::connect: Cannot connect %s::%s to %s::%s",
2965	sender ? sender->metaObject()->className() : "(nullptr)",
2966	signal.methodSignature().constData(),
2967	receiver ? receiver->metaObject()->className() : "(nullptr)",
2968	method.methodSignature().constData() );
2969	return QMetaObject::Connection(nullptr);
2970	}
2971
2972	int signal_index;
2973	int method_index;
2974	{
2975	int dummy;
2976	QMetaObjectPrivate::memberIndexes(obj: sender, member: signal, signalIndex: &signal_index, methodIndex: &dummy);
2977	QMetaObjectPrivate::memberIndexes(obj: receiver, member: method, signalIndex: &dummy, methodIndex: &method_index);
2978	}
2979
2980	const QMetaObject *smeta = sender->metaObject();
2981	const QMetaObject *rmeta = receiver->metaObject();
2982	if (signal_index == -1) {
2983	qWarning(msg: "QObject::connect: Can't find signal %s on instance of class %s",
2984	signal.methodSignature().constData(), smeta->className());
2985	return QMetaObject::Connection(nullptr);
2986	}
2987	if (method_index == -1) {
2988	qWarning(msg: "QObject::connect: Can't find method %s on instance of class %s",
2989	method.methodSignature().constData(), rmeta->className());
2990	return QMetaObject::Connection(nullptr);
2991	}
2992
2993	if (!QMetaObject::checkConnectArgs(signal: signal.methodSignature().constData(), method: method.methodSignature().constData())) {
2994	qWarning(msg: "QObject::connect: Incompatible sender/receiver arguments"
2995	"\n %s::%s --> %s::%s",
2996	smeta->className(), signal.methodSignature().constData(),
2997	rmeta->className(), method.methodSignature().constData());
2998	return QMetaObject::Connection(nullptr);
2999	}
3000
3001	int *types = nullptr;
3002	if ((type == Qt::QueuedConnection)
3003	&& !(types = queuedConnectionTypes(typeNames: signal.parameterTypes())))
3004	return QMetaObject::Connection(nullptr);
3005
3006	#ifndef QT_NO_DEBUG
3007	check_and_warn_compat(sender: smeta, signal, receiver: rmeta, method);
3008	#endif
3009	QMetaObject::Connection handle = QMetaObject::Connection(QMetaObjectPrivate::connect(
3010	sender, signal_index, smeta: signal.enclosingMetaObject(), receiver, method_index_relative: method_index, rmeta: nullptr, type, types));
3011	return handle;
3012	}
3013
3014	/*!
3015	\fn bool QObject::connect(const QObject *sender, const char *signal, const char *method, Qt::ConnectionType type) const
3016	\overload connect()
3017	\threadsafe
3018
3019	Connects \a signal from the \a sender object to this object's \a
3020	method.
3021
3022	Equivalent to connect(\a sender, \a signal, \c this, \a method, \a type).
3023
3024	Every connection you make emits a signal, so duplicate connections emit
3025	two signals. You can break a connection using disconnect().
3026
3027	\sa disconnect()
3028	*/
3029
3030	/*!
3031	\threadsafe
3032
3033	Disconnects \a signal in object \a sender from \a method in object
3034	\a receiver. Returns \c true if the connection is successfully broken;
3035	otherwise returns \c false.
3036
3037	A signal-slot connection is removed when either of the objects
3038	involved are destroyed.
3039
3040	disconnect() is typically used in three ways, as the following
3041	examples demonstrate.
3042	\list 1
3043	\li Disconnect everything connected to an object's signals:
3044
3045	\snippet code/src_corelib_kernel_qobject.cpp 26
3046
3047	equivalent to the non-static overloaded function
3048
3049	\snippet code/src_corelib_kernel_qobject.cpp 27
3050
3051	\li Disconnect everything connected to a specific signal:
3052
3053	\snippet code/src_corelib_kernel_qobject.cpp 28
3054
3055	equivalent to the non-static overloaded function
3056
3057	\snippet code/src_corelib_kernel_qobject.cpp 29
3058
3059	\li Disconnect a specific receiver:
3060
3061	\snippet code/src_corelib_kernel_qobject.cpp 30
3062
3063	equivalent to the non-static overloaded function
3064
3065	\snippet code/src_corelib_kernel_qobject.cpp 31
3066
3067	\endlist
3068
3069	\nullptr may be used as a wildcard, meaning "any signal", "any receiving
3070	object", or "any slot in the receiving object", respectively.
3071
3072	The \a sender may never be \nullptr. (You cannot disconnect signals
3073	from more than one object in a single call.)
3074
3075	If \a signal is \nullptr, it disconnects \a receiver and \a method from
3076	any signal. If not, only the specified signal is disconnected.
3077
3078	If \a receiver is \nullptr, it disconnects anything connected to \a
3079	signal. If not, slots in objects other than \a receiver are not
3080	disconnected.
3081
3082	If \a method is \nullptr, it disconnects anything that is connected to \a
3083	receiver. If not, only slots named \a method will be disconnected,
3084	and all other slots are left alone. The \a method must be \nullptr
3085	if \a receiver is left out, so you cannot disconnect a
3086	specifically-named slot on all objects.
3087
3088	\sa connect()
3089	*/
3090	bool QObject::disconnect(const QObject *sender, const char *signal,
3091	const QObject *receiver, const char *method)
3092	{
3093	if (sender == nullptr || (receiver == nullptr && method != nullptr)) {
3094	qWarning(msg: "QObject::disconnect: Unexpected nullptr parameter");
3095	return false;
3096	}
3097
3098	const char *signal_arg = signal;
3099	QByteArray signal_name;
3100	bool signal_found = false;
3101	if (signal) {
3102	QT_TRY {
3103	signal_name = QMetaObject::normalizedSignature(method: signal);
3104	signal = signal_name.constData();
3105	} QT_CATCH (const std::bad_alloc &) {
3106	// if the signal is already normalized, we can continue.
3107	if (sender->metaObject()->indexOfSignal(signal: signal + 1) == -1)
3108	QT_RETHROW;
3109	}
3110
3111	if (!check_signal_macro(sender, signal, func: "disconnect", op: "unbind"))
3112	return false;
3113	signal++; // skip code
3114	}
3115
3116	QByteArray method_name;
3117	const char *method_arg = method;
3118	int membcode = -1;
3119	bool method_found = false;
3120	if (method) {
3121	QT_TRY {
3122	method_name = QMetaObject::normalizedSignature(method);
3123	method = method_name.constData();
3124	} QT_CATCH(const std::bad_alloc &) {
3125	// if the method is already normalized, we can continue.
3126	if (receiver->metaObject()->indexOfMethod(method: method + 1) == -1)
3127	QT_RETHROW;
3128	}
3129
3130	membcode = extract_code(member: method);
3131	if (!check_method_code(code: membcode, object: receiver, method, func: "disconnect"))
3132	return false;
3133	method++; // skip code
3134	}
3135
3136	/* We now iterate through all the sender's and receiver's meta
3137	* objects in order to also disconnect possibly shadowed signals
3138	* and slots with the same signature.
3139	*/
3140	bool res = false;
3141	const QMetaObject *smeta = sender->metaObject();
3142	QByteArray signalName;
3143	QArgumentTypeArray signalTypes;
3144	Q_ASSERT(QMetaObjectPrivate::get(smeta)->revision >= 7);
3145	if (signal)
3146	signalName = QMetaObjectPrivate::decodeMethodSignature(signature: signal, types&: signalTypes);
3147	QByteArray methodName;
3148	QArgumentTypeArray methodTypes;
3149	Q_ASSERT(!receiver || QMetaObjectPrivate::get(receiver->metaObject())->revision >= 7);
3150	if (method)
3151	methodName = QMetaObjectPrivate::decodeMethodSignature(signature: method, types&: methodTypes);
3152	do {
3153	int signal_index = -1;
3154	if (signal) {
3155	signal_index = QMetaObjectPrivate::indexOfSignalRelative(
3156	baseObject: &smeta, name: signalName, argc: signalTypes.size(), types: signalTypes.constData());
3157	if (signal_index < 0)
3158	break;
3159	signal_index = QMetaObjectPrivate::originalClone(obj: smeta, local_method_index: signal_index);
3160	signal_index += QMetaObjectPrivate::signalOffset(m: smeta);
3161	signal_found = true;
3162	}
3163
3164	if (!method) {
3165	res |= QMetaObjectPrivate::disconnect(sender, signal_index, smeta, receiver, method_index: -1, slot: nullptr);
3166	} else {
3167	const QMetaObject *rmeta = receiver->metaObject();
3168	do {
3169	int method_index = QMetaObjectPrivate::indexOfMethod(
3170	m: rmeta, name: methodName, argc: methodTypes.size(), types: methodTypes.constData());
3171	if (method_index >= 0)
3172	while (method_index < rmeta->methodOffset())
3173	rmeta = rmeta->superClass();
3174	if (method_index < 0)
3175	break;
3176	res |= QMetaObjectPrivate::disconnect(sender, signal_index, smeta, receiver, method_index, slot: nullptr);
3177	method_found = true;
3178	} while ((rmeta = rmeta->superClass()));
3179	}
3180	} while (signal && (smeta = smeta->superClass()));
3181
3182	if (signal && !signal_found) {
3183	err_method_notfound(object: sender, method: signal_arg, func: "disconnect");
3184	err_info_about_objects(func: "disconnect", sender, receiver);
3185	} else if (method && !method_found) {
3186	err_method_notfound(object: receiver, method: method_arg, func: "disconnect");
3187	err_info_about_objects(func: "disconnect", sender, receiver);
3188	}
3189	if (res) {
3190	if (!signal)
3191	const_cast<QObject*>(sender)->disconnectNotify(signal: QMetaMethod());
3192	}
3193	return res;
3194	}
3195
3196	/*!
3197	\since 4.8
3198
3199	Disconnects \a signal in object \a sender from \a method in object
3200	\a receiver. Returns \c true if the connection is successfully broken;
3201	otherwise returns \c false.
3202
3203	This function provides the same possibilities like
3204	\c {disconnect(const QObject *sender, const char *signal, const QObject *receiver, const char *method) }
3205	but uses QMetaMethod to represent the signal and the method to be disconnected.
3206
3207	Additionally this function returns false and no signals and slots disconnected
3208	if:
3209	\list 1
3210
3211	\li \a signal is not a member of sender class or one of its parent classes.
3212
3213	\li \a method is not a member of receiver class or one of its parent classes.
3214
3215	\li \a signal instance represents not a signal.
3216
3217	\endlist
3218
3219	QMetaMethod() may be used as wildcard in the meaning "any signal" or "any slot in receiving object".
3220	In the same way \nullptr can be used for \a receiver in the meaning "any receiving object".
3221	In this case method should also be QMetaMethod(). \a sender parameter should be never \nullptr.
3222
3223	\sa disconnect(const QObject *sender, const char *signal, const QObject *receiver, const char *method)
3224	*/
3225	bool QObject::disconnect(const QObject *sender, const QMetaMethod &signal,
3226	const QObject *receiver, const QMetaMethod &method)
3227	{
3228	if (sender == nullptr || (receiver == nullptr && method.mobj != nullptr)) {
3229	qWarning(msg: "QObject::disconnect: Unexpected nullptr parameter");
3230	return false;
3231	}
3232	if (signal.mobj) {
3233	if(signal.methodType() != QMetaMethod::Signal) {
3234	qWarning(msg: "QObject::%s: Attempt to %s non-signal %s::%s",
3235	"disconnect","unbind",
3236	sender->metaObject()->className(), signal.methodSignature().constData());
3237	return false;
3238	}
3239	}
3240	if (method.mobj) {
3241	if(method.methodType() == QMetaMethod::Constructor) {
3242	qWarning(msg: "QObject::disconnect: cannot use constructor as argument %s::%s",
3243	receiver->metaObject()->className(), method.methodSignature().constData());
3244	return false;
3245	}
3246	}
3247
3248	// Reconstructing SIGNAL() macro result for signal.methodSignature() string
3249	QByteArray signalSignature;
3250	if (signal.mobj) {
3251	signalSignature.reserve(asize: signal.methodSignature().size()+1);
3252	signalSignature.append(c: (char)(QSIGNAL_CODE + '0'));
3253	signalSignature.append(a: signal.methodSignature());
3254	}
3255
3256	int signal_index;
3257	int method_index;
3258	{
3259	int dummy;
3260	QMetaObjectPrivate::memberIndexes(obj: sender, member: signal, signalIndex: &signal_index, methodIndex: &dummy);
3261	QMetaObjectPrivate::memberIndexes(obj: receiver, member: method, signalIndex: &dummy, methodIndex: &method_index);
3262	}
3263	// If we are here sender is not nullptr. If signal is not nullptr while signal_index
3264	// is -1 then this signal is not a member of sender.
3265	if (signal.mobj && signal_index == -1) {
3266	qWarning(msg: "QObject::disconnect: signal %s not found on class %s",
3267	signal.methodSignature().constData(), sender->metaObject()->className());
3268	return false;
3269	}
3270	// If this condition is true then method is not a member of receiver.
3271	if (receiver && method.mobj && method_index == -1) {
3272	qWarning(msg: "QObject::disconnect: method %s not found on class %s",
3273	method.methodSignature().constData(), receiver->metaObject()->className());
3274	return false;
3275	}
3276
3277	if (!QMetaObjectPrivate::disconnect(sender, signal_index, smeta: signal.mobj, receiver, method_index, slot: nullptr))
3278	return false;
3279
3280	if (!signal.isValid()) {
3281	// The signal is a wildcard, meaning all signals were disconnected.
3282	// QMetaObjectPrivate::disconnect() doesn't call disconnectNotify()
3283	// per connection in this case. Call it once now, with an invalid
3284	// QMetaMethod as argument, as documented.
3285	const_cast<QObject*>(sender)->disconnectNotify(signal);
3286	}
3287	return true;
3288	}
3289
3290	/*!
3291	\threadsafe
3292
3293	\fn bool QObject::disconnect(const char *signal, const QObject *receiver, const char *method) const
3294	\overload disconnect()
3295
3296	Disconnects \a signal from \a method of \a receiver.
3297
3298	A signal-slot connection is removed when either of the objects
3299	involved are destroyed.
3300	*/
3301
3302	/*!
3303	\fn bool QObject::disconnect(const QObject *receiver, const char *method) const
3304	\overload disconnect()
3305
3306	Disconnects all signals in this object from \a receiver's \a
3307	method.
3308
3309	A signal-slot connection is removed when either of the objects
3310	involved are destroyed.
3311	*/
3312
3313
3314	/*!
3315	\since 5.0
3316
3317	This virtual function is called when something has been connected
3318	to \a signal in this object.
3319
3320	If you want to compare \a signal with a specific signal, you can
3321	use QMetaMethod::fromSignal() as follows:
3322
3323	\snippet code/src_corelib_kernel_qobject.cpp 32
3324
3325	\warning This function violates the object-oriented principle of
3326	modularity. However, it might be useful when you need to perform
3327	expensive initialization only if something is connected to a
3328	signal.
3329
3330	\warning This function is called from the thread which performs the
3331	connection, which may be a different thread from the thread in
3332	which this object lives.
3333
3334	\sa connect(), disconnectNotify()
3335	*/
3336
3337	void QObject::connectNotify(const QMetaMethod &signal)
3338	{
3339	Q_UNUSED(signal);
3340	}
3341
3342	/*!
3343	\since 5.0
3344
3345	This virtual function is called when something has been
3346	disconnected from \a signal in this object.
3347
3348	See connectNotify() for an example of how to compare
3349	\a signal with a specific signal.
3350
3351	If all signals were disconnected from this object (e.g., the
3352	signal argument to disconnect() was \nullptr), disconnectNotify()
3353	is only called once, and the \a signal will be an invalid
3354	QMetaMethod (QMetaMethod::isValid() returns \c false).
3355
3356	\warning This function violates the object-oriented principle of
3357	modularity. However, it might be useful for optimizing access to
3358	expensive resources.
3359
3360	\warning This function is called from the thread which performs the
3361	disconnection, which may be a different thread from the thread in
3362	which this object lives. This function may also be called with a QObject
3363	internal mutex locked. It is therefore not allowed to re-enter any
3364	of any QObject functions from your reimplementation and if you lock
3365	a mutex in your reimplementation, make sure that you don't call QObject
3366	functions with that mutex held in other places or it will result in
3367	a deadlock.
3368
3369	\sa disconnect(), connectNotify()
3370	*/
3371
3372	void QObject::disconnectNotify(const QMetaMethod &signal)
3373	{
3374	Q_UNUSED(signal);
3375	}
3376
3377	/*
3378	\internal
3379	convert a signal index from the method range to the signal range
3380	*/
3381	static int methodIndexToSignalIndex(const QMetaObject **base, int signal_index)
3382	{
3383	if (signal_index < 0)
3384	return signal_index;
3385	const QMetaObject *metaObject = *base;
3386	while (metaObject && metaObject->methodOffset() > signal_index)
3387	metaObject = metaObject->superClass();
3388
3389	if (metaObject) {
3390	int signalOffset, methodOffset;
3391	computeOffsets(metaobject: metaObject, signalOffset: &signalOffset, methodOffset: &methodOffset);
3392	if (signal_index < metaObject->methodCount())
3393	signal_index = QMetaObjectPrivate::originalClone(obj: metaObject, local_method_index: signal_index - methodOffset) + signalOffset;
3394	else
3395	signal_index = signal_index - methodOffset + signalOffset;
3396	*base = metaObject;
3397	}
3398	return signal_index;
3399	}
3400
3401	/*!
3402	\internal
3403	\a types is a 0-terminated vector of meta types for queued
3404	connections.
3405
3406	if \a signal_index is -1, then we effectively connect *all* signals
3407	from the sender to the receiver's slot
3408	*/
3409	QMetaObject::Connection QMetaObject::connect(const QObject *sender, int signal_index,
3410	const QObject *receiver, int method_index, int type, int *types)
3411	{
3412	const QMetaObject *smeta = sender->metaObject();
3413	signal_index = methodIndexToSignalIndex(base: &smeta, signal_index);
3414	return Connection(QMetaObjectPrivate::connect(sender, signal_index, smeta,
3415	receiver, method_index_relative: method_index,
3416	rmeta: nullptr, //FIXME, we could speed this connection up by computing the relative index
3417	type, types));
3418	}
3419
3420	/*!
3421	\internal
3422	Same as the QMetaObject::connect, but \a signal_index must be the result of QObjectPrivate::signalIndex
3423
3424	method_index is relative to the rmeta metaobject, if rmeta is \nullptr, then it is absolute index
3425
3426	the QObjectPrivate::Connection* has a refcount of 2, so it must be passed to a QMetaObject::Connection
3427	*/
3428	QObjectPrivate::Connection *QMetaObjectPrivate::connect(const QObject *sender,
3429	int signal_index, const QMetaObject *smeta,
3430	const QObject *receiver, int method_index,
3431	const QMetaObject *rmeta, int type, int *types)
3432	{
3433	QObject *s = const_cast<QObject *>(sender);
3434	QObject *r = const_cast<QObject *>(receiver);
3435
3436	int method_offset = rmeta ? rmeta->methodOffset() : 0;
3437	Q_ASSERT(!rmeta || QMetaObjectPrivate::get(rmeta)->revision >= 6);
3438	QObjectPrivate::StaticMetaCallFunction callFunction = rmeta ? rmeta->d.static_metacall : nullptr;
3439
3440	QOrderedMutexLocker locker(signalSlotLock(o: sender),
3441	signalSlotLock(o: receiver));
3442
3443	QObjectPrivate::ConnectionData *scd = QObjectPrivate::get(o: s)->connections.loadRelaxed();
3444	if (type & Qt::UniqueConnection && scd) {
3445	if (scd->signalVectorCount() > signal_index) {
3446	const QObjectPrivate::Connection *c2 = scd->signalVector.loadRelaxed()->at(i: signal_index).first.loadRelaxed();
3447
3448	int method_index_absolute = method_index + method_offset;
3449
3450	while (c2) {
3451	if (!c2->isSlotObject && c2->receiver.loadRelaxed() == receiver && c2->method() == method_index_absolute)
3452	return nullptr;
3453	c2 = c2->nextConnectionList.loadRelaxed();
3454	}
3455	}
3456	type &= Qt::UniqueConnection - 1;
3457	}
3458
3459	std::unique_ptr<QObjectPrivate::Connection> c{new QObjectPrivate::Connection};
3460	c->sender = s;
3461	c->signal_index = signal_index;
3462	c->receiver.storeRelaxed(newValue: r);
3463	QThreadData *td = r->d_func()->threadData;
3464	td->ref();
3465	c->receiverThreadData.storeRelaxed(newValue: td);
3466	c->method_relative = method_index;
3467	c->method_offset = method_offset;
3468	c->connectionType = type;
3469	c->isSlotObject = false;
3470	c->argumentTypes.storeRelaxed(newValue: types);
3471	c->callFunction = callFunction;
3472
3473	QObjectPrivate::get(o: s)->addConnection(signal: signal_index, c: c.get());
3474
3475	locker.unlock();
3476	QMetaMethod smethod = QMetaObjectPrivate::signal(m: smeta, signal_index);
3477	if (smethod.isValid())
3478	s->connectNotify(signal: smethod);
3479
3480	return c.release();
3481	}
3482
3483	/*!
3484	\internal
3485	*/
3486	bool QMetaObject::disconnect(const QObject *sender, int signal_index,
3487	const QObject *receiver, int method_index)
3488	{
3489	const QMetaObject *smeta = sender->metaObject();
3490	signal_index = methodIndexToSignalIndex(base: &smeta, signal_index);
3491	return QMetaObjectPrivate::disconnect(sender, signal_index, smeta,
3492	receiver, method_index, slot: nullptr);
3493	}
3494
3495	/*!
3496	\internal
3497
3498	Disconnect a single signal connection. If QMetaObject::connect() has been called
3499	multiple times for the same sender, signal_index, receiver and method_index only
3500	one of these connections will be removed.
3501	*/
3502	bool QMetaObject::disconnectOne(const QObject *sender, int signal_index,
3503	const QObject *receiver, int method_index)
3504	{
3505	const QMetaObject *smeta = sender->metaObject();
3506	signal_index = methodIndexToSignalIndex(base: &smeta, signal_index);
3507	return QMetaObjectPrivate::disconnect(sender, signal_index, smeta,
3508	receiver, method_index, slot: nullptr,
3509	QMetaObjectPrivate::DisconnectOne);
3510	}
3511
3512	/*!
3513	\internal
3514	Helper function to remove the connection from the senders list and set the receivers to \nullptr
3515	*/
3516	bool QMetaObjectPrivate::disconnectHelper(QObjectPrivate::ConnectionData *connections, int signalIndex,
3517	const QObject *receiver, int method_index, void **slot,
3518	QBasicMutex *senderMutex, DisconnectType disconnectType)
3519	{
3520	bool success = false;
3521
3522	auto &connectionList = connections->connectionsForSignal(signal: signalIndex);
3523	auto *c = connectionList.first.loadRelaxed();
3524	while (c) {
3525	QObject *r = c->receiver.loadRelaxed();
3526	if (r && (receiver == nullptr || (r == receiver
3527	&& (method_index < 0 || (!c->isSlotObject && c->method() == method_index))
3528	&& (slot == nullptr || (c->isSlotObject && c->slotObj->compare(a: slot)))))) {
3529	bool needToUnlock = false;
3530	QBasicMutex *receiverMutex = nullptr;
3531	if (r) {
3532	receiverMutex = signalSlotLock(o: r);
3533	// need to relock this receiver and sender in the correct order
3534	needToUnlock = QOrderedMutexLocker::relock(mtx1: senderMutex, mtx2: receiverMutex);
3535	}
3536	if (c->receiver.loadRelaxed())
3537	connections->removeConnection(c);
3538
3539	if (needToUnlock)
3540	receiverMutex->unlock();
3541
3542	success = true;
3543
3544	if (disconnectType == DisconnectOne)
3545	return success;
3546	}
3547	c = c->nextConnectionList.loadRelaxed();
3548	}
3549	return success;
3550	}
3551
3552	/*!
3553	\internal
3554	Same as the QMetaObject::disconnect, but \a signal_index must be the result of QObjectPrivate::signalIndex
3555	*/
3556	bool QMetaObjectPrivate::disconnect(const QObject *sender,
3557	int signal_index, const QMetaObject *smeta,
3558	const QObject *receiver, int method_index, void **slot,
3559	DisconnectType disconnectType)
3560	{
3561	if (!sender)
3562	return false;
3563
3564	QObject *s = const_cast<QObject *>(sender);
3565
3566	QBasicMutex *senderMutex = signalSlotLock(o: sender);
3567	QBasicMutexLocker locker(senderMutex);
3568
3569	QObjectPrivate::ConnectionData *scd = QObjectPrivate::get(o: s)->connections.loadRelaxed();
3570	if (!scd)
3571	return false;
3572
3573	bool success = false;
3574	{
3575	// prevent incoming connections changing the connections->receivers while unlocked
3576	QObjectPrivate::ConnectionDataPointer connections(scd);
3577
3578	if (signal_index < 0) {
3579	// remove from all connection lists
3580	for (int sig_index = -1; sig_index < scd->signalVectorCount(); ++sig_index) {
3581	if (disconnectHelper(connections: connections.data(), signalIndex: sig_index, receiver, method_index, slot, senderMutex, disconnectType))
3582	success = true;
3583	}
3584	} else if (signal_index < scd->signalVectorCount()) {
3585	if (disconnectHelper(connections: connections.data(), signalIndex: signal_index, receiver, method_index, slot, senderMutex, disconnectType))
3586	success = true;
3587	}
3588	}
3589
3590	locker.unlock();
3591	if (success) {
3592	scd->cleanOrphanedConnections(sender: s);
3593
3594	QMetaMethod smethod = QMetaObjectPrivate::signal(m: smeta, signal_index);
3595	if (smethod.isValid())
3596	s->disconnectNotify(signal: smethod);
3597	}
3598
3599	return success;
3600	}
3601
3602	// Helpers for formatting the connect statements of connectSlotsByName()'s debug mode
3603	static QByteArray formatConnectionSignature(const char *className, const QMetaMethod &method)
3604	{
3605	const auto signature = method.methodSignature();
3606	Q_ASSERT(signature.endsWith(')'));
3607	const int openParen = signature.indexOf(c: '(');
3608	const bool hasParameters = openParen >= 0 && openParen < signature.size() - 2;
3609	QByteArray result;
3610	if (hasParameters) {
3611	result += "qOverload<"
3612	+ signature.mid(index: openParen + 1, len: signature.size() - openParen - 2) + ">(";
3613	}
3614	result += '&';
3615	result += className + QByteArrayLiteral("::") + method.name();
3616	if (hasParameters)
3617	result += ')';
3618	return result;
3619	}
3620
3621	static QByteArray msgConnect(const QMetaObject *senderMo, const QByteArray &senderName,
3622	const QMetaMethod &signal, const QObject *receiver, int receiverIndex)
3623	{
3624	const auto receiverMo = receiver->metaObject();
3625	const auto slot = receiverMo->method(index: receiverIndex);
3626	QByteArray message = QByteArrayLiteral("QObject::connect(")
3627	+ senderName + ", " + formatConnectionSignature(className: senderMo->className(), method: signal)
3628	+ ", " + receiver->objectName().toLatin1() + ", "
3629	+ formatConnectionSignature(className: receiverMo->className(), method: slot) + ");";
3630	return message;
3631	}
3632
3633	/*!
3634	\fn void QMetaObject::connectSlotsByName(QObject *object)
3635
3636	Searches recursively for all child objects of the given \a object, and connects
3637	matching signals from them to slots of \a object that follow the following form:
3638
3639	\snippet code/src_corelib_kernel_qobject.cpp 33
3640
3641	Let's assume our object has a child object of type \c{QPushButton} with
3642	the \l{QObject::objectName}{object name} \c{button1}. The slot to catch the
3643	button's \c{clicked()} signal would be:
3644
3645	\snippet code/src_corelib_kernel_qobject.cpp 34
3646
3647	If \a object itself has a properly set object name, its own signals are also
3648	connected to its respective slots.
3649
3650	\sa QObject::setObjectName()
3651	*/
3652	void QMetaObject::connectSlotsByName(QObject *o)
3653	{
3654	if (!o)
3655	return;
3656	const QMetaObject *mo = o->metaObject();
3657	Q_ASSERT(mo);
3658	const QObjectList list = // list of all objects to look for matching signals including...
3659	o->findChildren<QObject *>(aName: QString()) // all children of 'o'...
3660	<< o; // and the object 'o' itself
3661
3662	// for each method/slot of o ...
3663	for (int i = 0; i < mo->methodCount(); ++i) {
3664	const QByteArray slotSignature = mo->method(index: i).methodSignature();
3665	const char *slot = slotSignature.constData();
3666	Q_ASSERT(slot);
3667
3668	// ...that starts with "on_", ...
3669	if (slot[0] != 'o' || slot[1] != 'n' || slot[2] != '_')
3670	continue;
3671
3672	// ...we check each object in our list, ...
3673	bool foundIt = false;
3674	for(int j = 0; j < list.count(); ++j) {
3675	const QObject *co = list.at(i: j);
3676	const QByteArray coName = co->objectName().toLatin1();
3677
3678	// ...discarding those whose objectName is not fitting the pattern "on_<objectName>_...", ...
3679	if (coName.isEmpty() || qstrncmp(str1: slot + 3, str2: coName.constData(), len: coName.size()) || slot[coName.size()+3] != '_')
3680	continue;
3681
3682	const char *signal = slot + coName.size() + 4; // the 'signal' part of the slot name
3683
3684	// ...for the presence of a matching signal "on_<objectName>_<signal>".
3685	const QMetaObject *smeta;
3686	int sigIndex = co->d_func()->signalIndex(signalName: signal, meta: &smeta);
3687	if (sigIndex < 0) {
3688	// if no exactly fitting signal (name + complete parameter type list) could be found
3689	// look for just any signal with the correct name and at least the slot's parameter list.
3690	// Note: if more than one of those signals exist, the one that gets connected is
3691	// chosen 'at random' (order of declaration in source file)
3692	QList<QByteArray> compatibleSignals;
3693	const QMetaObject *smo = co->metaObject();
3694	int sigLen = qstrlen(str: signal) - 1; // ignore the trailing ')'
3695	for (int k = QMetaObjectPrivate::absoluteSignalCount(m: smo)-1; k >= 0; --k) {
3696	const QMetaMethod method = QMetaObjectPrivate::signal(m: smo, signal_index: k);
3697	if (!qstrncmp(str1: method.methodSignature().constData(), str2: signal, len: sigLen)) {
3698	smeta = method.enclosingMetaObject();
3699	sigIndex = k;
3700	compatibleSignals.prepend(t: method.methodSignature());
3701	}
3702	}
3703	if (compatibleSignals.size() > 1)
3704	qWarning() << "QMetaObject::connectSlotsByName: Connecting slot" << slot
3705	<< "with the first of the following compatible signals:" << compatibleSignals;
3706	}
3707
3708	if (sigIndex < 0)
3709	continue;
3710
3711	// we connect it...
3712	if (Connection(QMetaObjectPrivate::connect(sender: co, signal_index: sigIndex, smeta, receiver: o, method_index: i))) {
3713	foundIt = true;
3714	qCDebug(lcConnections, "%s",
3715	msgConnect(smeta, coName, QMetaObjectPrivate::signal(smeta, sigIndex), o, i).constData());
3716	// ...and stop looking for further objects with the same name.
3717	// Note: the Designer will make sure each object name is unique in the above
3718	// 'list' but other code may create two child objects with the same name. In
3719	// this case one is chosen 'at random'.
3720	break;
3721	}
3722	}
3723	if (foundIt) {
3724	// we found our slot, now skip all overloads
3725	while (mo->method(index: i + 1).attributes() & QMetaMethod::Cloned)
3726	++i;
3727	} else if (!(mo->method(index: i).attributes() & QMetaMethod::Cloned)) {
3728	// check if the slot has the following signature: "on_..._...(..."
3729	int iParen = slotSignature.indexOf(c: '(');
3730	int iLastUnderscore = slotSignature.lastIndexOf(c: '_', from: iParen-1);
3731	if (iLastUnderscore > 3)
3732	qWarning(msg: "QMetaObject::connectSlotsByName: No matching signal for %s", slot);
3733	}
3734	}
3735	}
3736
3737	/*!
3738	\internal
3739
3740	\a signal must be in the signal index range (see QObjectPrivate::signalIndex()).
3741	*/
3742	static void queued_activate(QObject *sender, int signal, QObjectPrivate::Connection *c, void **argv)
3743	{
3744	const int *argumentTypes = c->argumentTypes.loadRelaxed();
3745	if (!argumentTypes) {
3746	QMetaMethod m = QMetaObjectPrivate::signal(m: sender->metaObject(), signal_index: signal);
3747	argumentTypes = queuedConnectionTypes(typeNames: m.parameterTypes());
3748	if (!argumentTypes) // cannot queue arguments
3749	argumentTypes = &DIRECT_CONNECTION_ONLY;
3750	if (!c->argumentTypes.testAndSetOrdered(expectedValue: nullptr, newValue: argumentTypes)) {
3751	if (argumentTypes != &DIRECT_CONNECTION_ONLY)
3752	delete [] argumentTypes;
3753	argumentTypes = c->argumentTypes.loadRelaxed();
3754	}
3755	}
3756	if (argumentTypes == &DIRECT_CONNECTION_ONLY) // cannot activate
3757	return;
3758	int nargs = 1; // include return type
3759	while (argumentTypes[nargs-1])
3760	++nargs;
3761
3762	QBasicMutexLocker locker(signalSlotLock(o: c->receiver.loadRelaxed()));
3763	if (!c->receiver.loadRelaxed()) {
3764	// the connection has been disconnected before we got the lock
3765	return;
3766	}
3767	if (c->isSlotObject)
3768	c->slotObj->ref();
3769	locker.unlock();
3770
3771	QMetaCallEvent *ev = c->isSlotObject ?
3772	new QMetaCallEvent(c->slotObj, sender, signal, nargs) :
3773	new QMetaCallEvent(c->method_offset, c->method_relative, c->callFunction, sender, signal, nargs);
3774
3775	void **args = ev->args();
3776	int *types = ev->types();
3777
3778	types[0] = 0; // return type
3779	args[0] = nullptr; // return value
3780
3781	if (nargs > 1) {
3782	for (int n = 1; n < nargs; ++n)
3783	types[n] = argumentTypes[n-1];
3784
3785	for (int n = 1; n < nargs; ++n)
3786	args[n] = QMetaType::create(type: types[n], copy: argv[n]);
3787	}
3788
3789	locker.relock();
3790	if (c->isSlotObject)
3791	c->slotObj->destroyIfLastRef();
3792	if (!c->receiver.loadRelaxed()) {
3793	// the connection has been disconnected while we were unlocked
3794	locker.unlock();
3795	delete ev;
3796	return;
3797	}
3798
3799	QCoreApplication::postEvent(receiver: c->receiver.loadRelaxed(), event: ev);
3800	}
3801
3802	template <bool callbacks_enabled>
3803	void doActivate(QObject *sender, int signal_index, void **argv)
3804	{
3805	QObjectPrivate *sp = QObjectPrivate::get(o: sender);
3806
3807	if (sp->blockSig)
3808	return;
3809
3810	Q_TRACE_SCOPE(QMetaObject_activate, sender, signal_index);
3811
3812	if (sp->isDeclarativeSignalConnected(signal_index)
3813	&& QAbstractDeclarativeData::signalEmitted) {
3814	Q_TRACE_SCOPE(QMetaObject_activate_declarative_signal, sender, signal_index);
3815	QAbstractDeclarativeData::signalEmitted(sp->declarativeData, sender,
3816	signal_index, argv);
3817	}
3818
3819	const QSignalSpyCallbackSet *signal_spy_set = callbacks_enabled ? qt_signal_spy_callback_set.loadAcquire() : nullptr;
3820
3821	void *empty_argv[] = { nullptr };
3822	if (!argv)
3823	argv = empty_argv;
3824
3825	if (!sp->maybeSignalConnected(signalIndex: signal_index)) {
3826	// The possible declarative connection is done, and nothing else is connected
3827	if (callbacks_enabled && signal_spy_set->signal_begin_callback != nullptr)
3828	signal_spy_set->signal_begin_callback(sender, signal_index, argv);
3829	if (callbacks_enabled && signal_spy_set->signal_end_callback != nullptr)
3830	signal_spy_set->signal_end_callback(sender, signal_index);
3831	return;
3832	}
3833
3834	if (callbacks_enabled && signal_spy_set->signal_begin_callback != nullptr)
3835	signal_spy_set->signal_begin_callback(sender, signal_index, argv);
3836
3837	bool senderDeleted = false;
3838	{
3839	Q_ASSERT(sp->connections.loadAcquire());
3840	QObjectPrivate::ConnectionDataPointer connections(sp->connections.loadRelaxed());
3841	QObjectPrivate::SignalVector *signalVector = connections->signalVector.loadRelaxed();
3842
3843	const QObjectPrivate::ConnectionList *list;
3844	if (signal_index < signalVector->count())
3845	list = &signalVector->at(i: signal_index);
3846	else
3847	list = &signalVector->at(i: -1);
3848
3849	Qt::HANDLE currentThreadId = QThread::currentThreadId();
3850	bool inSenderThread = currentThreadId == QObjectPrivate::get(o: sender)->threadData.loadRelaxed()->threadId.loadRelaxed();
3851
3852	// We need to check against the highest connection id to ensure that signals added
3853	// during the signal emission are not emitted in this emission.
3854	uint highestConnectionId = connections->currentConnectionId.loadRelaxed();
3855	do {
3856	QObjectPrivate::Connection *c = list->first.loadRelaxed();
3857	if (!c)
3858	continue;
3859
3860	do {
3861	QObject * const receiver = c->receiver.loadRelaxed();
3862	if (!receiver)
3863	continue;
3864
3865	QThreadData *td = c->receiverThreadData.loadRelaxed();
3866	if (!td)
3867	continue;
3868
3869	bool receiverInSameThread;
3870	if (inSenderThread) {
3871	receiverInSameThread = currentThreadId == td->threadId.loadRelaxed();
3872	} else {
3873	// need to lock before reading the threadId, because moveToThread() could interfere
3874	QMutexLocker lock(signalSlotLock(o: receiver));
3875	receiverInSameThread = currentThreadId == td->threadId.loadRelaxed();
3876	}
3877
3878
3879	// determine if this connection should be sent immediately or
3880	// put into the event queue
3881	if ((c->connectionType == Qt::AutoConnection && !receiverInSameThread)
3882	|| (c->connectionType == Qt::QueuedConnection)) {
3883	queued_activate(sender, signal: signal_index, c, argv);
3884	continue;
3885	#if QT_CONFIG(thread)
3886	} else if (c->connectionType == Qt::BlockingQueuedConnection) {
3887	if (receiverInSameThread) {
3888	qWarning(msg: "Qt: Dead lock detected while activating a BlockingQueuedConnection: "
3889	"Sender is %s(%p), receiver is %s(%p)",
3890	sender->metaObject()->className(), sender,
3891	receiver->metaObject()->className(), receiver);
3892	}
3893	QSemaphore semaphore;
3894	{
3895	QBasicMutexLocker locker(signalSlotLock(o: sender));
3896	if (!c->receiver.loadAcquire())
3897	continue;
3898	QMetaCallEvent *ev = c->isSlotObject ?
3899	new QMetaCallEvent(c->slotObj, sender, signal_index, argv, &semaphore) :
3900	new QMetaCallEvent(c->method_offset, c->method_relative, c->callFunction,
3901	sender, signal_index, argv, &semaphore);
3902	QCoreApplication::postEvent(receiver, event: ev);
3903	}
3904	semaphore.acquire();
3905	continue;
3906	#endif
3907	}
3908
3909	QObjectPrivate::Sender senderData(receiverInSameThread ? receiver : nullptr, sender, signal_index);
3910
3911	if (c->isSlotObject) {
3912	c->slotObj->ref();
3913
3914	struct Deleter {
3915	void operator()(QtPrivate::QSlotObjectBase *slot) const {
3916	if (slot) slot->destroyIfLastRef();
3917	}
3918	};
3919	const std::unique_ptr<QtPrivate::QSlotObjectBase, Deleter> obj{c->slotObj};
3920
3921	{
3922	Q_TRACE_SCOPE(QMetaObject_activate_slot_functor, obj.get());
3923	obj->call(receiver, argv);
3924	}
3925	} else if (c->callFunction && c->method_offset <= receiver->metaObject()->methodOffset()) {
3926	//we compare the vtable to make sure we are not in the destructor of the object.
3927	const int method_relative = c->method_relative;
3928	const auto callFunction = c->callFunction;
3929	const int methodIndex = (Q_HAS_TRACEPOINTS || callbacks_enabled) ? c->method() : 0;
3930	if (callbacks_enabled && signal_spy_set->slot_begin_callback != nullptr)
3931	signal_spy_set->slot_begin_callback(receiver, methodIndex, argv);
3932
3933	{
3934	Q_TRACE_SCOPE(QMetaObject_activate_slot, receiver, methodIndex);
3935	callFunction(receiver, QMetaObject::InvokeMetaMethod, method_relative, argv);
3936	}
3937
3938	if (callbacks_enabled && signal_spy_set->slot_end_callback != nullptr)
3939	signal_spy_set->slot_end_callback(receiver, methodIndex);
3940	} else {
3941	const int method = c->method_relative + c->method_offset;
3942
3943	if (callbacks_enabled && signal_spy_set->slot_begin_callback != nullptr) {
3944	signal_spy_set->slot_begin_callback(receiver, method, argv);
3945	}
3946
3947	{
3948	Q_TRACE_SCOPE(QMetaObject_activate_slot, receiver, method);
3949	QMetaObject::metacall(receiver, QMetaObject::InvokeMetaMethod, method, argv);
3950	}
3951
3952	if (callbacks_enabled && signal_spy_set->slot_end_callback != nullptr)
3953	signal_spy_set->slot_end_callback(receiver, method);
3954	}
3955	} while ((c = c->nextConnectionList.loadRelaxed()) != nullptr && c->id <= highestConnectionId);
3956
3957	} while (list != &signalVector->at(i: -1) &&
3958	//start over for all signals;
3959	((list = &signalVector->at(i: -1)), true));
3960
3961	if (connections->currentConnectionId.loadRelaxed() == 0)
3962	senderDeleted = true;
3963	}
3964	if (!senderDeleted) {
3965	sp->connections.loadRelaxed()->cleanOrphanedConnections(sender);
3966
3967	if (callbacks_enabled && signal_spy_set->signal_end_callback != nullptr)
3968	signal_spy_set->signal_end_callback(sender, signal_index);
3969	}
3970	}
3971
3972	/*!
3973	\internal
3974	*/
3975	void QMetaObject::activate(QObject *sender, const QMetaObject *m, int local_signal_index,
3976	void **argv)
3977	{
3978	int signal_index = local_signal_index + QMetaObjectPrivate::signalOffset(m);
3979
3980	if (Q_UNLIKELY(qt_signal_spy_callback_set.loadRelaxed()))
3981	doActivate<true>(sender, signal_index, argv);
3982	else
3983	doActivate<false>(sender, signal_index, argv);
3984	}
3985
3986	/*!
3987	\internal
3988	*/
3989	void QMetaObject::activate(QObject *sender, int signalOffset, int local_signal_index, void **argv)
3990	{
3991	int signal_index = signalOffset + local_signal_index;
3992
3993	if (Q_UNLIKELY(qt_signal_spy_callback_set.loadRelaxed()))
3994	doActivate<true>(sender, signal_index, argv);
3995	else
3996	doActivate<false>(sender, signal_index, argv);
3997	}
3998
3999	/*!
4000	\internal
4001	signal_index comes from indexOfMethod()
4002	*/
4003	void QMetaObject::activate(QObject *sender, int signal_index, void **argv)
4004	{
4005	const QMetaObject *mo = sender->metaObject();
4006	while (mo->methodOffset() > signal_index)
4007	mo = mo->superClass();
4008	activate(sender, m: mo, local_signal_index: signal_index - mo->methodOffset(), argv);
4009	}
4010
4011	/*!
4012	\internal
4013	Returns the signal index used in the internal connections->receivers vector.
4014
4015	It is different from QMetaObject::indexOfSignal(): indexOfSignal is the same as indexOfMethod
4016	while QObjectPrivate::signalIndex is smaller because it doesn't give index to slots.
4017
4018	If \a meta is not \nullptr, it is set to the meta-object where the signal was found.
4019	*/
4020	int QObjectPrivate::signalIndex(const char *signalName,
4021	const QMetaObject **meta) const
4022	{
4023	Q_Q(const QObject);
4024	const QMetaObject *base = q->metaObject();
4025	Q_ASSERT(QMetaObjectPrivate::get(base)->revision >= 7);
4026	QArgumentTypeArray types;
4027	QByteArray name = QMetaObjectPrivate::decodeMethodSignature(signature: signalName, types);
4028	int relative_index = QMetaObjectPrivate::indexOfSignalRelative(
4029	baseObject: &base, name, argc: types.size(), types: types.constData());
4030	if (relative_index < 0)
4031	return relative_index;
4032	relative_index = QMetaObjectPrivate::originalClone(obj: base, local_method_index: relative_index);
4033	if (meta)
4034	*meta = base;
4035	return relative_index + QMetaObjectPrivate::signalOffset(m: base);
4036	}
4037
4038	/*****************************************************************************
4039	Properties
4040	*****************************************************************************/
4041
4042	#ifndef QT_NO_PROPERTIES
4043
4044	/*!
4045	Sets the value of the object's \a name property to \a value.
4046
4047	If the property is defined in the class using Q_PROPERTY then
4048	true is returned on success and false otherwise. If the property
4049	is not defined using Q_PROPERTY, and therefore not listed in the
4050	meta-object, it is added as a dynamic property and false is returned.
4051
4052	Information about all available properties is provided through the
4053	metaObject() and dynamicPropertyNames().
4054
4055	Dynamic properties can be queried again using property() and can be
4056	removed by setting the property value to an invalid QVariant.
4057	Changing the value of a dynamic property causes a QDynamicPropertyChangeEvent
4058	to be sent to the object.
4059
4060	\b{Note:} Dynamic properties starting with "_q_" are reserved for internal
4061	purposes.
4062
4063	\sa property(), metaObject(), dynamicPropertyNames(), QMetaProperty::write()
4064	*/
4065	bool QObject::setProperty(const char *name, const QVariant &value)
4066	{
4067	Q_D(QObject);
4068	const QMetaObject* meta = metaObject();
4069	if (!name || !meta)
4070	return false;
4071
4072	int id = meta->indexOfProperty(name);
4073	if (id < 0) {
4074	if (!d->extraData)
4075	d->extraData = new QObjectPrivate::ExtraData;
4076
4077	const int idx = d->extraData->propertyNames.indexOf(t: name);
4078
4079	if (!value.isValid()) {
4080	if (idx == -1)
4081	return false;
4082	d->extraData->propertyNames.removeAt(i: idx);
4083	d->extraData->propertyValues.removeAt(i: idx);
4084	} else {
4085	if (idx == -1) {
4086	d->extraData->propertyNames.append(t: name);
4087	d->extraData->propertyValues.append(t: value);
4088	} else {
4089	if (value.userType() == d->extraData->propertyValues.at(i: idx).userType()
4090	&& value == d->extraData->propertyValues.at(i: idx))
4091	return false;
4092	d->extraData->propertyValues[idx] = value;
4093	}
4094	}
4095
4096	QDynamicPropertyChangeEvent ev(name);
4097	QCoreApplication::sendEvent(receiver: this, event: &ev);
4098
4099	return false;
4100	}
4101	QMetaProperty p = meta->property(index: id);
4102	#ifndef QT_NO_DEBUG
4103	if (!p.isWritable())
4104	qWarning(msg: "%s::setProperty: Property \"%s\" invalid,"
4105	" read-only or does not exist", metaObject()->className(), name);
4106	#endif
4107	return p.write(obj: this, value);
4108	}
4109
4110	/*!
4111	Returns the value of the object's \a name property.
4112
4113	If no such property exists, the returned variant is invalid.
4114
4115	Information about all available properties is provided through the
4116	metaObject() and dynamicPropertyNames().
4117
4118	\sa setProperty(), QVariant::isValid(), metaObject(), dynamicPropertyNames()
4119	*/
4120	QVariant QObject::property(const char *name) const
4121	{
4122	Q_D(const QObject);
4123	const QMetaObject* meta = metaObject();
4124	if (!name || !meta)
4125	return QVariant();
4126
4127	int id = meta->indexOfProperty(name);
4128	if (id < 0) {
4129	if (!d->extraData)
4130	return QVariant();
4131	const int i = d->extraData->propertyNames.indexOf(t: name);
4132	return d->extraData->propertyValues.value(i);
4133	}
4134	QMetaProperty p = meta->property(index: id);
4135	#ifndef QT_NO_DEBUG
4136	if (!p.isReadable())
4137	qWarning(msg: "%s::property: Property \"%s\" invalid or does not exist",
4138	metaObject()->className(), name);
4139	#endif
4140	return p.read(obj: this);
4141	}
4142
4143	/*!
4144	\since 4.2
4145
4146	Returns the names of all properties that were dynamically added to
4147	the object using setProperty().
4148	*/
4149	QList<QByteArray> QObject::dynamicPropertyNames() const
4150	{
4151	Q_D(const QObject);
4152	if (d->extraData)
4153	return d->extraData->propertyNames;
4154	return QList<QByteArray>();
4155	}
4156
4157	#endif // QT_NO_PROPERTIES
4158
4159
4160	/*****************************************************************************
4161	QObject debugging output routines.
4162	*****************************************************************************/
4163
4164	static void dumpRecursive(int level, const QObject *object)
4165	{
4166	if (object) {
4167	QByteArray buf;
4168	buf.fill(c: ' ', size: level / 2 * 8);
4169	if (level % 2)
4170	buf += " ";
4171	QString name = object->objectName();
4172	QString flags = QLatin1String("");
4173	#if 0
4174	if (qApp->focusWidget() == object)
4175	flags += 'F';
4176	if (object->isWidgetType()) {
4177	QWidget * w = (QWidget *)object;
4178	if (w->isVisible()) {
4179	QString t("<%1,%2,%3,%4>");
4180	flags += t.arg(w->x()).arg(w->y()).arg(w->width()).arg(w->height());
4181	} else {
4182	flags += 'I';
4183	}
4184	}
4185	#endif
4186	qDebug(msg: "%s%s::%s %s", (const char*)buf, object->metaObject()->className(), name.toLocal8Bit().data(),
4187	flags.toLatin1().data());
4188	QObjectList children = object->children();
4189	if (!children.isEmpty()) {
4190	for (int i = 0; i < children.size(); ++i)
4191	dumpRecursive(level: level+1, object: children.at(i));
4192	}
4193	}
4194	}
4195
4196	#if QT_VERSION < QT_VERSION_CHECK(6, 0, 0)
4197	/*!
4198	\overload
4199	\obsolete
4200
4201	Dumps a tree of children to the debug output.
4202
4203	\sa dumpObjectInfo()
4204	*/
4205
4206	void QObject::dumpObjectTree()
4207	{
4208	const_cast<const QObject *>(this)->dumpObjectTree();
4209	}
4210	#endif
4211
4212	/*!
4213	Dumps a tree of children to the debug output.
4214
4215	\note Before Qt 5.9, this function was not const.
4216
4217	\sa dumpObjectInfo()
4218	*/
4219
4220	void QObject::dumpObjectTree() const
4221	{
4222	dumpRecursive(level: 0, object: this);
4223	}
4224
4225	#if QT_VERSION < QT_VERSION_CHECK(6, 0, 0)
4226	/*!
4227	\overload
4228	\obsolete
4229
4230	Dumps information about signal connections, etc. for this object
4231	to the debug output.
4232
4233	\sa dumpObjectTree()
4234	*/
4235
4236	void QObject::dumpObjectInfo()
4237	{
4238	const_cast<const QObject *>(this)->dumpObjectInfo();
4239	}
4240	#endif
4241
4242	/*!
4243	Dumps information about signal connections, etc. for this object
4244	to the debug output.
4245
4246	\note Before Qt 5.9, this function was not const.
4247
4248	\sa dumpObjectTree()
4249	*/
4250
4251	void QObject::dumpObjectInfo() const
4252	{
4253	qDebug(msg: "OBJECT %s::%s", metaObject()->className(),
4254	objectName().isEmpty() ? "unnamed" : objectName().toLocal8Bit().data());
4255
4256	Q_D(const QObject);
4257	QBasicMutexLocker locker(signalSlotLock(o: this));
4258
4259	// first, look for connections where this object is the sender
4260	qDebug(msg: " SIGNALS OUT");
4261
4262	QObjectPrivate::ConnectionData *cd = d->connections.loadRelaxed();
4263	if (cd && cd->signalVectorCount() > 0) {
4264	QObjectPrivate::SignalVector *signalVector = cd->signalVector.loadRelaxed();
4265	for (int signal_index = 0; signal_index < signalVector->count(); ++signal_index) {
4266	const QObjectPrivate::Connection *c = signalVector->at(i: signal_index).first.loadRelaxed();
4267	if (!c)
4268	continue;
4269	const QMetaMethod signal = QMetaObjectPrivate::signal(m: metaObject(), signal_index);
4270	qDebug(msg: " signal: %s", signal.methodSignature().constData());
4271
4272	// receivers
4273	while (c) {
4274	if (!c->receiver.loadRelaxed()) {
4275	qDebug(msg: " <Disconnected receiver>");
4276	c = c->nextConnectionList.loadRelaxed();
4277	continue;
4278	}
4279	if (c->isSlotObject) {
4280	qDebug(msg: " <functor or function pointer>");
4281	c = c->nextConnectionList.loadRelaxed();
4282	continue;
4283	}
4284	const QMetaObject *receiverMetaObject = c->receiver.loadRelaxed()->metaObject();
4285	const QMetaMethod method = receiverMetaObject->method(index: c->method());
4286	qDebug(msg: " --> %s::%s %s",
4287	receiverMetaObject->className(),
4288	c->receiver.loadRelaxed()->objectName().isEmpty() ? "unnamed" : qPrintable(c->receiver.loadRelaxed()->objectName()),
4289	method.methodSignature().constData());
4290	c = c->nextConnectionList.loadRelaxed();
4291	}
4292	}
4293	} else {
4294	qDebug( msg: " <None>" );
4295	}
4296
4297	// now look for connections where this object is the receiver
4298	qDebug(msg: " SIGNALS IN");
4299
4300	if (cd && cd->senders) {
4301	for (QObjectPrivate::Connection *s = cd->senders; s; s = s->next) {
4302	QByteArray slotName = QByteArrayLiteral("<unknown>");
4303	if (!s->isSlotObject) {
4304	const QMetaMethod slot = metaObject()->method(index: s->method());
4305	slotName = slot.methodSignature();
4306	}
4307	qDebug(msg: " <-- %s::%s %s",
4308	s->sender->metaObject()->className(),
4309	s->sender->objectName().isEmpty() ? "unnamed" : qPrintable(s->sender->objectName()),
4310	slotName.constData());
4311	}
4312	} else {
4313	qDebug(msg: " <None>");
4314	}
4315	}
4316
4317	#ifndef QT_NO_USERDATA
4318	static QBasicAtomicInteger<uint> user_data_registration = Q_BASIC_ATOMIC_INITIALIZER(0);
4319
4320	/*!
4321	\internal
4322	*/
4323	uint QObject::registerUserData()
4324	{
4325	return user_data_registration.fetchAndAddRelaxed(valueToAdd: 1);
4326	}
4327
4328	/*!
4329	\fn QObjectUserData::QObjectUserData()
4330	\internal
4331	*/
4332
4333	/*!
4334	\internal
4335	*/
4336	QObjectUserData::~QObjectUserData()
4337	{
4338	}
4339
4340	/*!
4341	\internal
4342	*/
4343	void QObject::setUserData(uint id, QObjectUserData* data)
4344	{
4345	Q_D(QObject);
4346	if (!d->extraData)
4347	d->extraData = new QObjectPrivate::ExtraData;
4348
4349	if (d->extraData->userData.size() <= (int) id)
4350	d->extraData->userData.resize(asize: (int) id + 1);
4351	d->extraData->userData[id] = data;
4352	}
4353
4354	/*!
4355	\internal
4356	*/
4357	QObjectUserData* QObject::userData(uint id) const
4358	{
4359	Q_D(const QObject);
4360	if (!d->extraData)
4361	return nullptr;
4362	if ((int)id < d->extraData->userData.size())
4363	return d->extraData->userData.at(i: id);
4364	return nullptr;
4365	}
4366
4367	#endif // QT_NO_USERDATA
4368
4369
4370	#ifndef QT_NO_DEBUG_STREAM
4371	QDebug operator<<(QDebug dbg, const QObject *o)
4372	{
4373	QDebugStateSaver saver(dbg);
4374	if (!o)
4375	return dbg << "QObject(0x0)";
4376	dbg.nospace() << o->metaObject()->className() << '(' << (const void *)o;
4377	if (!o->objectName().isEmpty())
4378	dbg << ", name = " << o->objectName();
4379	dbg << ')';
4380	return dbg;
4381	}
4382	#endif
4383
4384	/*!
4385	\macro Q_CLASSINFO(Name, Value)
4386	\relates QObject
4387
4388	This macro associates extra information to the class, which is available
4389	using QObject::metaObject(). Qt makes only limited use of this feature, in
4390	the \l{Active Qt}, \l{Qt D-Bus} and \l{Qt QML module}{Qt QML}.
4391
4392	The extra information takes the form of a \a Name string and a \a Value
4393	literal string.
4394
4395	Example:
4396
4397	\snippet code/src_corelib_kernel_qobject.cpp 35
4398
4399	\sa QMetaObject::classInfo()
4400	\sa QAxFactory
4401	\sa {Using Qt D-Bus Adaptors}
4402	\sa {Extending QML}
4403	*/
4404
4405	/*!
4406	\macro Q_INTERFACES(...)
4407	\relates QObject
4408
4409	This macro tells Qt which interfaces the class implements. This
4410	is used when implementing plugins.
4411
4412	Example:
4413
4414	\snippet ../widgets/tools/plugandpaint/plugins/basictools/basictoolsplugin.h 1
4415	\dots
4416	\snippet ../widgets/tools/plugandpaint/plugins/basictools/basictoolsplugin.h 3
4417
4418	See the \l{tools/plugandpaint/plugins/basictools}{Plug & Paint
4419	Basic Tools} example for details.
4420
4421	\sa Q_DECLARE_INTERFACE(), Q_PLUGIN_METADATA(), {How to Create Qt Plugins}
4422	*/
4423
4424	/*!
4425	\macro Q_PROPERTY(...)
4426	\relates QObject
4427
4428	This macro is used for declaring properties in classes that
4429	inherit QObject. Properties behave like class data members, but
4430	they have additional features accessible through the \l
4431	{Meta-Object System}.
4432
4433	\snippet code/doc_src_properties.cpp 0
4434
4435	The property name and type and the \c READ function are required.
4436	The type can be any type supported by QVariant, or it can be a
4437	user-defined type. The other items are optional, but a \c WRITE
4438	function is common. The attributes default to true except \c USER,
4439	which defaults to false.
4440
4441	For example:
4442
4443	\snippet code/src_corelib_kernel_qobject.cpp 37
4444
4445	For more details about how to use this macro, and a more detailed
4446	example of its use, see the discussion on \l {Qt's Property System}.
4447
4448	\sa {Qt's Property System}
4449	*/
4450
4451	/*!
4452	\macro Q_ENUMS(...)
4453	\relates QObject
4454	\obsolete
4455
4456	In new code, you should prefer the use of the Q_ENUM() macro, which makes the
4457	type available also to the meta type system.
4458	For instance, QMetaEnum::fromType() will not work with types declared with Q_ENUMS().
4459
4460	This macro registers one or several enum types to the meta-object
4461	system.
4462
4463	If you want to register an enum that is declared in another class,
4464	the enum must be fully qualified with the name of the class
4465	defining it. In addition, the class \e defining the enum has to
4466	inherit QObject as well as declare the enum using Q_ENUMS().
4467
4468	\sa {Qt's Property System}
4469	*/
4470
4471	/*!
4472	\macro Q_FLAGS(...)
4473	\relates QObject
4474	\obsolete
4475
4476	This macro registers one or several \l{QFlags}{flags types} with the
4477	meta-object system. It is typically used in a class definition to declare
4478	that values of a given enum can be used as flags and combined using the
4479	bitwise OR operator.
4480
4481	\note This macro takes care of registering individual flag values
4482	with the meta-object system, so it is unnecessary to use Q_ENUMS()
4483	in addition to this macro.
4484
4485	In new code, you should prefer the use of the Q_FLAG() macro, which makes the
4486	type available also to the meta type system.
4487
4488	\sa {Qt's Property System}
4489	*/
4490
4491	/*!
4492	\macro Q_ENUM(...)
4493	\relates QObject
4494	\since 5.5
4495
4496	This macro registers an enum type with the meta-object system.
4497	It must be placed after the enum declaration in a class that has the Q_OBJECT or the
4498	Q_GADGET macro. For namespaces use \l Q_ENUM_NS() instead.
4499
4500	For example:
4501
4502	\snippet code/src_corelib_kernel_qobject.cpp 38
4503
4504	Enumerations that are declared with Q_ENUM have their QMetaEnum registered in the
4505	enclosing QMetaObject. You can also use QMetaEnum::fromType() to get the QMetaEnum.
4506
4507	Registered enumerations are automatically registered also to the Qt meta
4508	type system, making them known to QMetaType without the need to use
4509	Q_DECLARE_METATYPE(). This will enable useful features; for example, if used
4510	in a QVariant, you can convert them to strings. Likewise, passing them to
4511	QDebug will print out their names.
4512
4513	Mind that the enum values are stored as signed \c int in the meta object system.
4514	Registering enumerations with values outside the range of values valid for \c int
4515	will lead to overflows and potentially undefined behavior when accessing them through
4516	the meta object system. QML, for example, does access registered enumerations through
4517	the meta object system.
4518
4519	\sa {Qt's Property System}
4520	*/
4521
4522
4523	/*!
4524	\macro Q_FLAG(...)
4525	\relates QObject
4526	\since 5.5
4527
4528	This macro registers a single \l{QFlags}{flags type} with the
4529	meta-object system. It is typically used in a class definition to declare
4530	that values of a given enum can be used as flags and combined using the
4531	bitwise OR operator. For namespaces use \l Q_FLAG_NS() instead.
4532
4533	The macro must be placed after the enum declaration. The declaration of
4534	the flags type is done using the \l Q_DECLARE_FLAGS() macro.
4535
4536	For example, in QItemSelectionModel, the
4537	\l{QItemSelectionModel::SelectionFlags}{SelectionFlags} flag is
4538	declared in the following way:
4539
4540	\snippet code/src_corelib_kernel_qobject.cpp 39
4541
4542	\note The Q_FLAG macro takes care of registering individual flag values
4543	with the meta-object system, so it is unnecessary to use Q_ENUM()
4544	in addition to this macro.
4545
4546	\sa {Qt's Property System}
4547	*/
4548
4549	/*!
4550	\macro Q_ENUM_NS(...)
4551	\relates QObject
4552	\since 5.8
4553
4554	This macro registers an enum type with the meta-object system.
4555	It must be placed after the enum declaration in a namespace that
4556	has the Q_NAMESPACE macro. It is the same as \l Q_ENUM but in a
4557	namespace.
4558
4559	Enumerations that are declared with Q_ENUM_NS have their QMetaEnum
4560	registered in the enclosing QMetaObject. You can also use
4561	QMetaEnum::fromType() to get the QMetaEnum.
4562
4563	Registered enumerations are automatically registered also to the Qt meta
4564	type system, making them known to QMetaType without the need to use
4565	Q_DECLARE_METATYPE(). This will enable useful features; for example, if
4566	used in a QVariant, you can convert them to strings. Likewise, passing them
4567	to QDebug will print out their names.
4568
4569	Mind that the enum values are stored as signed \c int in the meta object system.
4570	Registering enumerations with values outside the range of values valid for \c int
4571	will lead to overflows and potentially undefined behavior when accessing them through
4572	the meta object system. QML, for example, does access registered enumerations through
4573	the meta object system.
4574
4575	\sa {Qt's Property System}
4576	*/
4577
4578
4579	/*!
4580	\macro Q_FLAG_NS(...)
4581	\relates QObject
4582	\since 5.8
4583
4584	This macro registers a single \l{QFlags}{flags type} with the
4585	meta-object system. It is used in a namespace that has the
4586	Q_NAMESPACE macro, to declare that values of a given enum can be
4587	used as flags and combined using the bitwise OR operator.
4588	It is the same as \l Q_FLAG but in a namespace.
4589
4590	The macro must be placed after the enum declaration.
4591
4592	\note The Q_FLAG_NS macro takes care of registering individual flag
4593	values with the meta-object system, so it is unnecessary to use
4594	Q_ENUM_NS() in addition to this macro.
4595
4596	\sa {Qt's Property System}
4597	*/
4598
4599
4600	/*!
4601	\macro Q_OBJECT
4602	\relates QObject
4603
4604	The Q_OBJECT macro must appear in the private section of a class
4605	definition that declares its own signals and slots or that uses
4606	other services provided by Qt's meta-object system.
4607
4608	For example:
4609
4610	\snippet signalsandslots/signalsandslots.h 1
4611	\codeline
4612	\snippet signalsandslots/signalsandslots.h 2
4613	\snippet signalsandslots/signalsandslots.h 3
4614
4615	\note This macro requires the class to be a subclass of QObject. Use
4616	Q_GADGET instead of Q_OBJECT to enable the meta object system's support
4617	for enums in a class that is not a QObject subclass.
4618
4619	\sa {Meta-Object System}, {Signals and Slots}, {Qt's Property System}
4620	*/
4621
4622	/*!
4623	\macro Q_GADGET
4624	\relates QObject
4625
4626	The Q_GADGET macro is a lighter version of the Q_OBJECT macro for classes
4627	that do not inherit from QObject but still want to use some of the
4628	reflection capabilities offered by QMetaObject. Just like the Q_OBJECT
4629	macro, it must appear in the private section of a class definition.
4630
4631	Q_GADGETs can have Q_ENUM, Q_PROPERTY and Q_INVOKABLE, but they cannot have
4632	signals or slots.
4633
4634	Q_GADGET makes a class member, \c{staticMetaObject}, available.
4635	\c{staticMetaObject} is of type QMetaObject and provides access to the
4636	enums declared with Q_ENUMS.
4637	*/
4638
4639	/*!
4640	\macro Q_NAMESPACE
4641	\relates QObject
4642	\since 5.8
4643
4644	The Q_NAMESPACE macro can be used to add QMetaObject capabilities
4645	to a namespace.
4646
4647	Q_NAMESPACEs can have Q_CLASSINFO, Q_ENUM_NS, Q_FLAG_NS, but they
4648	cannot have Q_ENUM, Q_FLAG, Q_PROPERTY, Q_INVOKABLE, signals nor slots.
4649
4650	Q_NAMESPACE makes an external variable, \c{staticMetaObject}, available.
4651	\c{staticMetaObject} is of type QMetaObject and provides access to the
4652	enums declared with Q_ENUM_NS/Q_FLAG_NS.
4653
4654	For example:
4655
4656	\code
4657	namespace test {
4658	Q_NAMESPACE
4659	...
4660	\endcode
4661
4662	\sa Q_NAMESPACE_EXPORT
4663	*/
4664
4665	/*!
4666	\macro Q_NAMESPACE_EXPORT(EXPORT_MACRO)
4667	\relates QObject
4668	\since 5.14
4669
4670	The Q_NAMESPACE_EXPORT macro can be used to add QMetaObject capabilities
4671	to a namespace.
4672
4673	It works exactly like the Q_NAMESPACE macro. However, the external
4674	\c{staticMetaObject} variable that gets defined in the namespace
4675	is declared with the supplied \a EXPORT_MACRO qualifier. This is
4676	useful if the object needs to be exported from a dynamic library.
4677
4678	For example:
4679
4680	\code
4681	namespace test {
4682	Q_NAMESPACE_EXPORT(EXPORT_MACRO)
4683	...
4684	\endcode
4685
4686	\sa Q_NAMESPACE, {Creating Shared Libraries}
4687	*/
4688
4689	/*!
4690	\macro Q_SIGNALS
4691	\relates QObject
4692
4693	Use this macro to replace the \c signals keyword in class
4694	declarations, when you want to use Qt Signals and Slots with a
4695	\l{3rd Party Signals and Slots} {3rd party signal/slot mechanism}.
4696
4697	The macro is normally used when \c no_keywords is specified with
4698	the \c CONFIG variable in the \c .pro file, but it can be used
4699	even when \c no_keywords is \e not specified.
4700	*/
4701
4702	/*!
4703	\macro Q_SIGNAL
4704	\relates QObject
4705
4706	This is an additional macro that allows you to mark a single
4707	function as a signal. It can be quite useful, especially when you
4708	use a 3rd-party source code parser which doesn't understand a \c
4709	signals or \c Q_SIGNALS groups.
4710
4711	Use this macro to replace the \c signals keyword in class
4712	declarations, when you want to use Qt Signals and Slots with a
4713	\l{3rd Party Signals and Slots} {3rd party signal/slot mechanism}.
4714
4715	The macro is normally used when \c no_keywords is specified with
4716	the \c CONFIG variable in the \c .pro file, but it can be used
4717	even when \c no_keywords is \e not specified.
4718	*/
4719
4720	/*!
4721	\macro Q_SLOTS
4722	\relates QObject
4723
4724	Use this macro to replace the \c slots keyword in class
4725	declarations, when you want to use Qt Signals and Slots with a
4726	\l{3rd Party Signals and Slots} {3rd party signal/slot mechanism}.
4727
4728	The macro is normally used when \c no_keywords is specified with
4729	the \c CONFIG variable in the \c .pro file, but it can be used
4730	even when \c no_keywords is \e not specified.
4731	*/
4732
4733	/*!
4734	\macro Q_SLOT
4735	\relates QObject
4736
4737	This is an additional macro that allows you to mark a single
4738	function as a slot. It can be quite useful, especially when you
4739	use a 3rd-party source code parser which doesn't understand a \c
4740	slots or \c Q_SLOTS groups.
4741
4742	Use this macro to replace the \c slots keyword in class
4743	declarations, when you want to use Qt Signals and Slots with a
4744	\l{3rd Party Signals and Slots} {3rd party signal/slot mechanism}.
4745
4746	The macro is normally used when \c no_keywords is specified with
4747	the \c CONFIG variable in the \c .pro file, but it can be used
4748	even when \c no_keywords is \e not specified.
4749	*/
4750
4751	/*!
4752	\macro Q_EMIT
4753	\relates QObject
4754
4755	Use this macro to replace the \c emit keyword for emitting
4756	signals, when you want to use Qt Signals and Slots with a
4757	\l{3rd Party Signals and Slots} {3rd party signal/slot mechanism}.
4758
4759	The macro is normally used when \c no_keywords is specified with
4760	the \c CONFIG variable in the \c .pro file, but it can be used
4761	even when \c no_keywords is \e not specified.
4762	*/
4763
4764	/*!
4765	\macro Q_INVOKABLE
4766	\relates QObject
4767
4768	Apply this macro to declarations of member functions to allow them to
4769	be invoked via the meta-object system. The macro is written before
4770	the return type, as shown in the following example:
4771
4772	\snippet qmetaobject-invokable/window.h Window class with invokable method
4773
4774	The \c invokableMethod() function is marked up using Q_INVOKABLE, causing
4775	it to be registered with the meta-object system and enabling it to be
4776	invoked using QMetaObject::invokeMethod().
4777	Since \c normalMethod() function is not registered in this way, it cannot
4778	be invoked using QMetaObject::invokeMethod().
4779
4780	If an invokable member function returns a pointer to a QObject or a
4781	subclass of QObject and it is invoked from QML, special ownership rules
4782	apply. See \l{qtqml-cppintegration-data.html}{Data Type Conversion Between QML and C++}
4783	for more information.
4784	*/
4785
4786	/*!
4787	\macro Q_REVISION
4788	\relates QObject
4789
4790	Apply this macro to declarations of member functions to tag them with a
4791	revision number in the meta-object system. The macro is written before
4792	the return type, as shown in the following example:
4793
4794	\snippet qmetaobject-revision/window.h Window class with revision
4795
4796	This is useful when using the meta-object system to dynamically expose
4797	objects to another API, as you can match the version expected by multiple
4798	versions of the other API. Consider the following simplified example:
4799
4800	\snippet qmetaobject-revision/main.cpp Window class using revision
4801
4802	Using the same Window class as the previous example, the newProperty and
4803	newMethod would only be exposed in this code when the expected version is
4804	1 or greater.
4805
4806	Since all methods are considered to be in revision 0 if untagged, a tag
4807	of Q_REVISION(0) is invalid and ignored.
4808
4809	This tag is not used by the meta-object system itself. Currently this is only
4810	used by the QtQml module.
4811
4812	For a more generic string tag, see \l QMetaMethod::tag()
4813
4814	\sa QMetaMethod::revision()
4815	*/
4816
4817	/*!
4818	\macro Q_SET_OBJECT_NAME(Object)
4819	\relates QObject
4820	\since 5.0
4821
4822	This macro assigns \a Object the objectName "Object".
4823
4824	It doesn't matter whether \a Object is a pointer or not, the
4825	macro figures that out by itself.
4826
4827	\sa QObject::objectName()
4828	*/
4829
4830	/*!
4831	\macro QT_NO_NARROWING_CONVERSIONS_IN_CONNECT
4832	\relates QObject
4833	\since 5.8
4834
4835	Defining this macro will disable narrowing and floating-point-to-integral
4836	conversions between the arguments carried by a signal and the arguments
4837	accepted by a slot, when the signal and the slot are connected using the
4838	PMF-based syntax.
4839
4840	\sa QObject::connect
4841	*/
4842
4843	/*!
4844	\typedef QObjectList
4845	\relates QObject
4846
4847	Synonym for QList<QObject *>.
4848	*/
4849
4850	void qDeleteInEventHandler(QObject *o)
4851	{
4852	delete o;
4853	}
4854
4855	/*!
4856	\fn template<typename PointerToMemberFunction> QMetaObject::Connection QObject::connect(const QObject *sender, PointerToMemberFunction signal, const QObject *receiver, PointerToMemberFunction method, Qt::ConnectionType type)
4857	\overload connect()
4858	\threadsafe
4859
4860	Creates a connection of the given \a type from the \a signal in
4861	the \a sender object to the \a method in the \a receiver object.
4862	Returns a handle to the connection that can be used to disconnect
4863	it later.
4864
4865	The signal must be a function declared as a signal in the header.
4866	The slot function can be any member function that can be connected
4867	to the signal.
4868	A slot can be connected to a given signal if the signal has at
4869	least as many arguments as the slot, and there is an implicit
4870	conversion between the types of the corresponding arguments in the
4871	signal and the slot.
4872
4873	Example:
4874
4875	\snippet code/src_corelib_kernel_qobject.cpp 44
4876
4877	This example ensures that the label always displays the current
4878	line edit text.
4879
4880	A signal can be connected to many slots and signals. Many signals
4881	can be connected to one slot.
4882
4883	If a signal is connected to several slots, the slots are activated
4884	in the same order as the order the connection was made, when the
4885	signal is emitted
4886
4887	The function returns an handle to a connection if it successfully
4888	connects the signal to the slot. The Connection handle will be invalid
4889	if it cannot create the connection, for example, if QObject is unable
4890	to verify the existence of \a signal (if it was not declared as a signal)
4891	You can check if the QMetaObject::Connection is valid by casting it to a bool.
4892
4893	By default, a signal is emitted for every connection you make;
4894	two signals are emitted for duplicate connections. You can break
4895	all of these connections with a single disconnect() call.
4896	If you pass the Qt::UniqueConnection \a type, the connection will only
4897	be made if it is not a duplicate. If there is already a duplicate
4898	(exact same signal to the exact same slot on the same objects),
4899	the connection will fail and connect will return an invalid QMetaObject::Connection.
4900
4901	The optional \a type parameter describes the type of connection
4902	to establish. In particular, it determines whether a particular
4903	signal is delivered to a slot immediately or queued for delivery
4904	at a later time. If the signal is queued, the parameters must be
4905	of types that are known to Qt's meta-object system, because Qt
4906	needs to copy the arguments to store them in an event behind the
4907	scenes. If you try to use a queued connection and get the error
4908	message
4909
4910	\snippet code/src_corelib_kernel_qobject.cpp 25
4911
4912	make sure to declare the argument type with Q_DECLARE_METATYPE
4913
4914	Overloaded functions can be resolved with help of \l qOverload.
4915
4916	\sa {Differences between String-Based and Functor-Based Connections}
4917	*/
4918
4919	/*!
4920	\fn template<typename PointerToMemberFunction, typename Functor> QMetaObject::Connection QObject::connect(const QObject *sender, PointerToMemberFunction signal, Functor functor)
4921
4922	\threadsafe
4923	\overload connect()
4924
4925	Creates a connection from \a signal in
4926	\a sender object to \a functor, and returns a handle to the connection
4927
4928	The signal must be a function declared as a signal in the header.
4929	The slot function can be any function or functor that can be connected
4930	to the signal.
4931	A function can be connected to a given signal if the signal has at
4932	least as many argument as the slot. A functor can be connected to a signal
4933	if they have exactly the same number of arguments. There must exist implicit
4934	conversion between the types of the corresponding arguments in the
4935	signal and the slot.
4936
4937	Example:
4938
4939	\snippet code/src_corelib_kernel_qobject.cpp 45
4940
4941	Lambda expressions can also be used:
4942
4943	\snippet code/src_corelib_kernel_qobject.cpp 46
4944
4945	The connection will automatically disconnect if the sender is destroyed.
4946	However, you should take care that any objects used within the functor
4947	are still alive when the signal is emitted.
4948
4949	Overloaded functions can be resolved with help of \l qOverload.
4950
4951	*/
4952
4953	/*!
4954	\fn template<typename PointerToMemberFunction, typename Functor> QMetaObject::Connection QObject::connect(const QObject *sender, PointerToMemberFunction signal, const QObject *context, Functor functor, Qt::ConnectionType type)
4955
4956	\threadsafe
4957	\overload connect()
4958
4959	\since 5.2
4960
4961	Creates a connection of a given \a type from \a signal in
4962	\a sender object to \a functor to be placed in a specific event
4963	loop of \a context, and returns a handle to the connection.
4964
4965	\note Qt::UniqueConnections do not work for lambdas, non-member functions
4966	and functors; they only apply to connecting to member functions.
4967
4968	The signal must be a function declared as a signal in the header.
4969	The slot function can be any function or functor that can be connected
4970	to the signal.
4971	A function can be connected to a given signal if the signal has at
4972	least as many argument as the slot. A functor can be connected to a signal
4973	if they have exactly the same number of arguments. There must exist implicit
4974	conversion between the types of the corresponding arguments in the
4975	signal and the slot.
4976
4977	Example:
4978
4979	\snippet code/src_corelib_kernel_qobject.cpp 50
4980
4981	Lambda expressions can also be used:
4982
4983	\snippet code/src_corelib_kernel_qobject.cpp 51
4984
4985	The connection will automatically disconnect if the sender or the context
4986	is destroyed.
4987	However, you should take care that any objects used within the functor
4988	are still alive when the signal is emitted.
4989
4990	Overloaded functions can be resolved with help of \l qOverload.
4991	*/
4992
4993	/*!
4994	\internal
4995
4996	Implementation of the template version of connect
4997
4998	\a sender is the sender object
4999	\a signal is a pointer to a pointer to a member signal of the sender
5000	\a receiver is the receiver object, may not be \nullptr, will be equal to sender when
5001	connecting to a static function or a functor
5002	\a slot a pointer only used when using Qt::UniqueConnection
5003	\a type the Qt::ConnectionType passed as argument to connect
5004	\a types an array of integer with the metatype id of the parameter of the signal
5005	to be used with queued connection
5006	must stay valid at least for the whole time of the connection, this function
5007	do not take ownership. typically static data.
5008	If \nullptr, then the types will be computed when the signal is emit in a queued
5009	connection from the types from the signature.
5010	\a senderMetaObject is the metaobject used to lookup the signal, the signal must be in
5011	this metaobject
5012	*/
5013	QMetaObject::Connection QObject::connectImpl(const QObject *sender, void **signal,
5014	const QObject *receiver, void **slot,
5015	QtPrivate::QSlotObjectBase *slotObj, Qt::ConnectionType type,
5016	const int *types, const QMetaObject *senderMetaObject)
5017	{
5018	if (!signal) {
5019	qWarning(msg: "QObject::connect: invalid nullptr parameter");
5020	if (slotObj)
5021	slotObj->destroyIfLastRef();
5022	return QMetaObject::Connection();
5023	}
5024
5025	int signal_index = -1;
5026	void *args[] = { &signal_index, signal };
5027	for (; senderMetaObject && signal_index < 0; senderMetaObject = senderMetaObject->superClass()) {
5028	senderMetaObject->static_metacall(QMetaObject::IndexOfMethod, 0, args);
5029	if (signal_index >= 0 && signal_index < QMetaObjectPrivate::get(metaobject: senderMetaObject)->signalCount)
5030	break;
5031	}
5032	if (!senderMetaObject) {
5033	qWarning(msg: "QObject::connect: signal not found in %s", sender->metaObject()->className());
5034	slotObj->destroyIfLastRef();
5035	return QMetaObject::Connection(nullptr);
5036	}
5037	signal_index += QMetaObjectPrivate::signalOffset(m: senderMetaObject);
5038	return QObjectPrivate::connectImpl(sender, signal_index, receiver, slot, slotObj, type, types, senderMetaObject);
5039	}
5040
5041	/*!
5042	\internal
5043
5044	Internal version of connect used by the template version of QObject::connect (called via connectImpl) and
5045	also used by the QObjectPrivate::connect version used by QML. The signal_index is expected to be relative
5046	to the number of signals.
5047	*/
5048	QMetaObject::Connection QObjectPrivate::connectImpl(const QObject *sender, int signal_index,
5049	const QObject *receiver, void **slot,
5050	QtPrivate::QSlotObjectBase *slotObj, Qt::ConnectionType type,
5051	const int *types, const QMetaObject *senderMetaObject)
5052	{
5053	if (!sender || !receiver || !slotObj || !senderMetaObject) {
5054	const char *senderString = sender ? sender->metaObject()->className()
5055	: senderMetaObject ? senderMetaObject->className()
5056	: "Unknown";
5057	const char *receiverString = receiver ? receiver->metaObject()->className()
5058	: "Unknown";
5059	qWarning(msg: "QObject::connect(%s, %s): invalid nullptr parameter", senderString, receiverString);
5060	if (slotObj)
5061	slotObj->destroyIfLastRef();
5062	return QMetaObject::Connection();
5063	}
5064
5065	QObject *s = const_cast<QObject *>(sender);
5066	QObject *r = const_cast<QObject *>(receiver);
5067
5068	QOrderedMutexLocker locker(signalSlotLock(o: sender),
5069	signalSlotLock(o: receiver));
5070
5071	if (type & Qt::UniqueConnection && slot && QObjectPrivate::get(o: s)->connections.loadRelaxed()) {
5072	QObjectPrivate::ConnectionData *connections = QObjectPrivate::get(o: s)->connections.loadRelaxed();
5073	if (connections->signalVectorCount() > signal_index) {
5074	const QObjectPrivate::Connection *c2 = connections->signalVector.loadRelaxed()->at(i: signal_index).first.loadRelaxed();
5075
5076	while (c2) {
5077	if (c2->receiver.loadRelaxed() == receiver && c2->isSlotObject && c2->slotObj->compare(a: slot)) {
5078	slotObj->destroyIfLastRef();
5079	return QMetaObject::Connection();
5080	}
5081	c2 = c2->nextConnectionList.loadRelaxed();
5082	}
5083	}
5084	type = static_cast<Qt::ConnectionType>(type ^ Qt::UniqueConnection);
5085	}
5086
5087	std::unique_ptr<QObjectPrivate::Connection> c{new QObjectPrivate::Connection};
5088	c->sender = s;
5089	c->signal_index = signal_index;
5090	QThreadData *td = r->d_func()->threadData;
5091	td->ref();
5092	c->receiverThreadData.storeRelaxed(newValue: td);
5093	c->receiver.storeRelaxed(newValue: r);
5094	c->slotObj = slotObj;
5095	c->connectionType = type;
5096	c->isSlotObject = true;
5097	if (types) {
5098	c->argumentTypes.storeRelaxed(newValue: types);
5099	c->ownArgumentTypes = false;
5100	}
5101
5102	QObjectPrivate::get(o: s)->addConnection(signal: signal_index, c: c.get());
5103	QMetaObject::Connection ret(c.release());
5104	locker.unlock();
5105
5106	QMetaMethod method = QMetaObjectPrivate::signal(m: senderMetaObject, signal_index);
5107	Q_ASSERT(method.isValid());
5108	s->connectNotify(signal: method);
5109
5110	return ret;
5111	}
5112
5113	/*!
5114	Disconnect a connection.
5115
5116	If the \a connection is invalid or has already been disconnected, do nothing
5117	and return false.
5118
5119	\sa connect()
5120	*/
5121	bool QObject::disconnect(const QMetaObject::Connection &connection)
5122	{
5123	QObjectPrivate::Connection *c = static_cast<QObjectPrivate::Connection *>(connection.d_ptr);
5124
5125	if (!c)
5126	return false;
5127	QObject *receiver = c->receiver.loadRelaxed();
5128	if (!receiver)
5129	return false;
5130
5131	QBasicMutex *senderMutex = signalSlotLock(o: c->sender);
5132	QBasicMutex *receiverMutex = signalSlotLock(o: receiver);
5133
5134	QObjectPrivate::ConnectionData *connections;
5135	{
5136	QOrderedMutexLocker locker(senderMutex, receiverMutex);
5137
5138	// load receiver once again and recheck to ensure nobody else has removed the connection in the meantime
5139	receiver = c->receiver.loadRelaxed();
5140	if (!receiver)
5141	return false;
5142
5143	connections = QObjectPrivate::get(o: c->sender)->connections.loadRelaxed();
5144	Q_ASSERT(connections);
5145	connections->removeConnection(c);
5146
5147	c->sender->disconnectNotify(signal: QMetaObjectPrivate::signal(m: c->sender->metaObject(), signal_index: c->signal_index));
5148	// We must not hold the receiver mutex, else we risk dead-locking; we also only need the sender mutex
5149	// It is however vital to hold the senderMutex before calling cleanOrphanedConnections, as otherwise
5150	// another thread might modify/delete the connection
5151	if (receiverMutex != senderMutex) {
5152	receiverMutex->unlock();
5153	}
5154	connections->cleanOrphanedConnections(sender: c->sender, lockPolicy: QObjectPrivate::ConnectionData::AlreadyLockedAndTemporarilyReleasingLock);
5155	senderMutex->unlock(); // now both sender and receiver mutex have been manually unlocked
5156	locker.dismiss(); // so we dismiss the QOrderedMutexLocker
5157	}
5158
5159	const_cast<QMetaObject::Connection &>(connection).d_ptr = nullptr;
5160	c->deref(); // has been removed from the QMetaObject::Connection object
5161
5162	return true;
5163	}
5164
5165	/*! \fn template<typename PointerToMemberFunction> bool QObject::disconnect(const QObject *sender, PointerToMemberFunction signal, const QObject *receiver, PointerToMemberFunction method)
5166	\overload disconnect()
5167	\threadsafe
5168
5169	Disconnects \a signal in object \a sender from \a method in object
5170	\a receiver. Returns \c true if the connection is successfully broken;
5171	otherwise returns \c false.
5172
5173	A signal-slot connection is removed when either of the objects
5174	involved are destroyed.
5175
5176	disconnect() is typically used in three ways, as the following
5177	examples demonstrate.
5178	\list 1
5179	\li Disconnect everything connected to an object's signals:
5180
5181	\snippet code/src_corelib_kernel_qobject.cpp 26
5182
5183	\li Disconnect everything connected to a specific signal:
5184
5185	\snippet code/src_corelib_kernel_qobject.cpp 47
5186
5187	\li Disconnect a specific receiver:
5188
5189	\snippet code/src_corelib_kernel_qobject.cpp 30
5190
5191	\li Disconnect a connection from one specific signal to a specific slot:
5192
5193	\snippet code/src_corelib_kernel_qobject.cpp 48
5194
5195
5196	\endlist
5197
5198	\nullptr may be used as a wildcard, meaning "any signal", "any receiving
5199	object", or "any slot in the receiving object", respectively.
5200
5201	The \a sender may never be \nullptr. (You cannot disconnect signals
5202	from more than one object in a single call.)
5203
5204	If \a signal is \nullptr, it disconnects \a receiver and \a method from
5205	any signal. If not, only the specified signal is disconnected.
5206
5207	If \a receiver is \nullptr, it disconnects anything connected to \a
5208	signal. If not, slots in objects other than \a receiver are not
5209	disconnected.
5210
5211	If \a method is \nullptr, it disconnects anything that is connected to \a
5212	receiver. If not, only slots named \a method will be disconnected,
5213	and all other slots are left alone. The \a method must be \nullptr
5214	if \a receiver is left out, so you cannot disconnect a
5215	specifically-named slot on all objects.
5216
5217	\note It is not possible to use this overload to disconnect signals
5218	connected to functors or lambda expressions. That is because it is not
5219	possible to compare them. Instead, use the overload that takes a
5220	QMetaObject::Connection
5221
5222	\sa connect()
5223	*/
5224
5225	bool QObject::disconnectImpl(const QObject *sender, void **signal, const QObject *receiver, void **slot, const QMetaObject *senderMetaObject)
5226	{
5227	if (sender == nullptr || (receiver == nullptr && slot != nullptr)) {
5228	qWarning(msg: "QObject::disconnect: Unexpected nullptr parameter");
5229	return false;
5230	}
5231
5232	int signal_index = -1;
5233	if (signal) {
5234	void *args[] = { &signal_index, signal };
5235	for (; senderMetaObject && signal_index < 0; senderMetaObject = senderMetaObject->superClass()) {
5236	senderMetaObject->static_metacall(QMetaObject::IndexOfMethod, 0, args);
5237	if (signal_index >= 0 && signal_index < QMetaObjectPrivate::get(metaobject: senderMetaObject)->signalCount)
5238	break;
5239	}
5240	if (!senderMetaObject) {
5241	qWarning(msg: "QObject::disconnect: signal not found in %s", sender->metaObject()->className());
5242	return false;
5243	}
5244	signal_index += QMetaObjectPrivate::signalOffset(m: senderMetaObject);
5245	}
5246
5247	return QMetaObjectPrivate::disconnect(sender, signal_index, smeta: senderMetaObject, receiver, method_index: -1, slot);
5248	}
5249
5250	/*!
5251	\internal
5252	Used by QML to connect a signal by index to a slot implemented in JavaScript
5253	(wrapped in a custom QSlotObjectBase subclass).
5254
5255	This version of connect assumes that sender and receiver are the same object.
5256
5257	The signal_index is an index relative to the number of methods.
5258	*/
5259	QMetaObject::Connection QObjectPrivate::connect(const QObject *sender, int signal_index, QtPrivate::QSlotObjectBase *slotObj, Qt::ConnectionType type)
5260	{
5261	return QObjectPrivate::connect(sender, signal_index, receiver: sender, slotObj, type);
5262	}
5263
5264	/*!
5265	\internal
5266	Used by QML to connect a signal by index to a slot implemented in JavaScript
5267	(wrapped in a custom QSlotObjectBase subclass).
5268
5269	This is an overload that should be used when \a sender and \a receiver are
5270	different objects.
5271
5272	The signal_index is an index relative to the number of methods.
5273	*/
5274	QMetaObject::Connection QObjectPrivate::connect(const QObject *sender, int signal_index,
5275	const QObject *receiver,
5276	QtPrivate::QSlotObjectBase *slotObj,
5277	Qt::ConnectionType type)
5278	{
5279	if (!sender) {
5280	qWarning(msg: "QObject::connect: invalid nullptr parameter");
5281	if (slotObj)
5282	slotObj->destroyIfLastRef();
5283	return QMetaObject::Connection();
5284	}
5285	const QMetaObject *senderMetaObject = sender->metaObject();
5286	signal_index = methodIndexToSignalIndex(base: &senderMetaObject, signal_index);
5287
5288	return QObjectPrivate::connectImpl(sender, signal_index, receiver, /*slot*/ nullptr, slotObj,
5289	type, /*types*/ nullptr, senderMetaObject);
5290	}
5291
5292	/*!
5293	\internal
5294	Used by QML to disconnect a signal by index that's connected to a slot implemented in JavaScript (wrapped in a custom QSlotObjectBase subclass)
5295	In the QML case the slot is not a pointer to a pointer to the function to disconnect, but instead it is a pointer to an array of internal values
5296	required for the disconnect.
5297
5298	This version of disconnect assumes that sender and receiver are the same object.
5299	*/
5300	bool QObjectPrivate::disconnect(const QObject *sender, int signal_index, void **slot)
5301	{
5302	return QObjectPrivate::disconnect(sender, signal_index, receiver: sender, slot);
5303	}
5304
5305	/*!
5306	\internal
5307
5308	Used by QML to disconnect a signal by index that's connected to a slot
5309	implemented in JavaScript (wrapped in a custom QSlotObjectBase subclass) In the
5310	QML case the slot is not a pointer to a pointer to the function to disconnect,
5311	but instead it is a pointer to an array of internal values required for the
5312	disconnect.
5313
5314	This is an overload that should be used when \a sender and \a receiver are
5315	different objects.
5316	*/
5317	bool QObjectPrivate::disconnect(const QObject *sender, int signal_index, const QObject *receiver,
5318	void **slot)
5319	{
5320	const QMetaObject *senderMetaObject = sender->metaObject();
5321	signal_index = methodIndexToSignalIndex(base: &senderMetaObject, signal_index);
5322
5323	return QMetaObjectPrivate::disconnect(sender, signal_index, smeta: senderMetaObject, receiver, method_index: -1,
5324	slot);
5325	}
5326
5327	/*! \class QMetaObject::Connection
5328	\inmodule QtCore
5329	Represents a handle to a signal-slot (or signal-functor) connection.
5330
5331	It can be used to check if the connection is valid and to disconnect it using
5332	QObject::disconnect(). For a signal-functor connection without a context object,
5333	it is the only way to selectively disconnect that connection.
5334
5335	As Connection is just a handle, the underlying signal-slot connection is unaffected
5336	when Connection is destroyed or reassigned.
5337	*/
5338
5339	/*!
5340	Create a copy of the handle to the \a other connection
5341	*/
5342	QMetaObject::Connection::Connection(const QMetaObject::Connection &other) : d_ptr(other.d_ptr)
5343	{
5344	if (d_ptr)
5345	static_cast<QObjectPrivate::Connection *>(d_ptr)->ref();
5346	}
5347
5348	/*!
5349	Assigns \a other to this connection and returns a reference to this connection.
5350	*/
5351	QMetaObject::Connection& QMetaObject::Connection::operator=(const QMetaObject::Connection& other)
5352	{
5353	if (other.d_ptr != d_ptr) {
5354	if (d_ptr)
5355	static_cast<QObjectPrivate::Connection *>(d_ptr)->deref();
5356	d_ptr = other.d_ptr;
5357	if (other.d_ptr)
5358	static_cast<QObjectPrivate::Connection *>(other.d_ptr)->ref();
5359	}
5360	return *this;
5361	}
5362
5363	/*!
5364	Creates a Connection instance.
5365	*/
5366
5367	QMetaObject::Connection::Connection() : d_ptr(nullptr) {}
5368
5369	/*!
5370	Destructor for QMetaObject::Connection.
5371	*/
5372	QMetaObject::Connection::~Connection()
5373	{
5374	if (d_ptr)
5375	static_cast<QObjectPrivate::Connection *>(d_ptr)->deref();
5376	}
5377
5378	/*! \internal Returns true if the object is still connected */
5379	bool QMetaObject::Connection::isConnected_helper() const
5380	{
5381	Q_ASSERT(d_ptr); // we're only called from operator RestrictedBool() const
5382	QObjectPrivate::Connection *c = static_cast<QObjectPrivate::Connection *>(d_ptr);
5383
5384	return c->receiver.loadRelaxed();
5385	}
5386
5387
5388	/*!
5389	\fn QMetaObject::Connection::operator bool() const
5390
5391	Returns \c true if the connection is valid.
5392
5393	The connection is valid if the call to QObject::connect succeeded.
5394	The connection is invalid if QObject::connect was not able to find
5395	the signal or the slot, or if the arguments do not match.
5396	*/
5397
5398	QT_END_NAMESPACE
5399
5400	#include "moc_qnamespace.cpp"
5401	#include "moc_qobject.cpp"
5402