1	// Copyright (C) 2021 The Qt Company Ltd.
2	// Copyright (C) 2016 Intel Corporation.
3	// Copyright (C) 2013 Olivier Goffart <[email protected]>
4	// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only
5
6	#include "qobject.h"
7	#include "qobject_p.h"
8	#include "qobject_p_p.h"
9	#include "qmetaobject_p.h"
10
11	#include "qabstracteventdispatcher.h"
12	#include "qabstracteventdispatcher_p.h"
13	#include "qcoreapplication.h"
14	#include "qcoreapplication_p.h"
15	#include "qcoreevent_p.h"
16	#include "qloggingcategory.h"
17	#include "qvariant.h"
18	#include "qmetaobject.h"
19	#if QT_CONFIG(regularexpression)
20	# include <qregularexpression.h>
21	#endif
22	#include <qthread.h>
23	#include <private/qthread_p.h>
24	#include <qdebug.h>
25	#include <qvarlengtharray.h>
26	#include <qscopeguard.h>
27	#include <qset.h>
28	#if QT_CONFIG(thread)
29	#include <qsemaphore.h>
30	#endif
31
32	#include <private/qorderedmutexlocker_p.h>
33	#include <private/qhooks_p.h>
34	#include <qtcore_tracepoints_p.h>
35
36	#include <new>
37	#include <mutex>
38	#include <memory>
39
40	#include <ctype.h>
41	#include <limits.h>
42
43	QT_BEGIN_NAMESPACE
44
45	Q_TRACE_POINT(qtcore, QObject_ctor, QObject *object);
46	Q_TRACE_POINT(qtcore, QObject_dtor, QObject *object);
47	Q_TRACE_POINT(qtcore, QMetaObject_activate_entry, QObject *sender, int signalIndex);
48	Q_TRACE_POINT(qtcore, QMetaObject_activate_exit);
49	Q_TRACE_POINT(qtcore, QMetaObject_activate_slot_entry, QObject *receiver, int slotIndex);
50	Q_TRACE_POINT(qtcore, QMetaObject_activate_slot_exit);
51	Q_TRACE_POINT(qtcore, QMetaObject_activate_slot_functor_entry, void *slotObject);
52	Q_TRACE_POINT(qtcore, QMetaObject_activate_slot_functor_exit);
53	Q_TRACE_POINT(qtcore, QMetaObject_activate_declarative_signal_entry, QObject *sender, int signalIndex);
54	Q_TRACE_POINT(qtcore, QMetaObject_activate_declarative_signal_exit);
55
56	static int DIRECT_CONNECTION_ONLY = 0;
57
58	Q_LOGGING_CATEGORY(lcConnectSlotsByName, "qt.core.qmetaobject.connectslotsbyname")
59	Q_LOGGING_CATEGORY(lcConnect, "qt.core.qobject.connect")
60
61	Q_CORE_EXPORT QBasicAtomicPointer<QSignalSpyCallbackSet> qt_signal_spy_callback_set = Q_BASIC_ATOMIC_INITIALIZER(nullptr);
62
63	void qt_register_signal_spy_callbacks(QSignalSpyCallbackSet *callback_set)
64	{
65	qt_signal_spy_callback_set.storeRelease(newValue: callback_set);
66	}
67
68	QDynamicMetaObjectData::~QDynamicMetaObjectData()
69	{
70	}
71
72	QAbstractDynamicMetaObject::~QAbstractDynamicMetaObject()
73	{
74	}
75
76	static int *queuedConnectionTypes(const QMetaMethod &method)
77	{
78	const auto parameterCount = method.parameterCount();
79	int *typeIds = new int[parameterCount + 1];
80	Q_CHECK_PTR(typeIds);
81	for (int i = 0; i < parameterCount; ++i) {
82	const QMetaType metaType = method.parameterMetaType(index: i);
83	if (metaType.flags() & QMetaType::IsPointer)
84	typeIds[i] = QMetaType::VoidStar;
85	else
86	typeIds[i] = metaType.id();
87	if (!typeIds[i] && method.parameterTypeName(index: i).endsWith(c: '*'))
88	typeIds[i] = QMetaType::VoidStar;
89	if (!typeIds[i]) {
90	const QByteArray typeName = method.parameterTypeName(index: i);
91	qCWarning(lcConnect,
92	"QObject::connect: Cannot queue arguments of type '%s'\n"
93	"(Make sure '%s' is registered using qRegisterMetaType().)",
94	typeName.constData(), typeName.constData());
95	delete[] typeIds;
96	return nullptr;
97	}
98	}
99	typeIds[parameterCount] = 0;
100
101	return typeIds;
102	}
103
104	static int *queuedConnectionTypes(const QArgumentType *argumentTypes, int argc)
105	{
106	auto types = std::make_unique<int[]>(num: argc + 1);
107	for (int i = 0; i < argc; ++i) {
108	const QArgumentType &type = argumentTypes[i];
109	if (type.type())
110	types[i] = type.type();
111	else if (type.name().endsWith(c: '*'))
112	types[i] = QMetaType::VoidStar;
113	else
114	types[i] = QMetaType::fromName(name: type.name()).id();
115
116	if (!types[i]) {
117	qCWarning(lcConnect,
118	"QObject::connect: Cannot queue arguments of type '%s'\n"
119	"(Make sure '%s' is registered using qRegisterMetaType().)",
120	type.name().constData(), type.name().constData());
121	return nullptr;
122	}
123	}
124	types[argc] = 0;
125
126	return types.release();
127	}
128
129	Q_CONSTINIT static QBasicMutex _q_ObjectMutexPool[131];
130
131	/**
132	* \internal
133	* mutex to be locked when accessing the connection lists or the senders list
134	*/
135	static inline QBasicMutex *signalSlotLock(const QObject *o)
136	{
137	return &_q_ObjectMutexPool[uint(quintptr(o)) % sizeof(_q_ObjectMutexPool)/sizeof(QBasicMutex)];
138	}
139
140	void (*QAbstractDeclarativeData::destroyed)(QAbstractDeclarativeData *, QObject *) = nullptr;
141	void (*QAbstractDeclarativeData::signalEmitted)(QAbstractDeclarativeData *, QObject *, int, void **) = nullptr;
142	int (*QAbstractDeclarativeData::receivers)(QAbstractDeclarativeData *, const QObject *, int) = nullptr;
143	bool (*QAbstractDeclarativeData::isSignalConnected)(QAbstractDeclarativeData *, const QObject *, int) = nullptr;
144	void (*QAbstractDeclarativeData::setWidgetParent)(QObject *, QObject *) = nullptr;
145
146	/*!
147	\fn QObjectData::QObjectData()
148	\internal
149	*/
150
151
152	QObjectData::~QObjectData() {}
153
154	QMetaObject *QObjectData::dynamicMetaObject() const
155	{
156	return metaObject->toDynamicMetaObject(q_ptr);
157	}
158
159	QObjectPrivate::QObjectPrivate(int version)
160	: threadData(nullptr), currentChildBeingDeleted(nullptr)
161	{
162	checkForIncompatibleLibraryVersion(version);
163
164	// QObjectData initialization
165	q_ptr = nullptr;
166	parent = nullptr; // no parent yet. It is set by setParent()
167	isWidget = false; // assume not a widget object
168	blockSig = false; // not blocking signals
169	wasDeleted = false; // double-delete catcher
170	isDeletingChildren = false; // set by deleteChildren()
171	sendChildEvents = true; // if we should send ChildAdded and ChildRemoved events to parent
172	receiveChildEvents = true;
173	postedEvents.storeRelaxed(newValue: 0);
174	extraData = nullptr;
175	metaObject = nullptr;
176	isWindow = false;
177	deleteLaterCalled = false;
178	isQuickItem = false;
179	willBeWidget = false;
180	wasWidget = false;
181	receiveParentEvents = false; // If object wants ParentAboutToChange and ParentChange
182	}
183
184	QObjectPrivate::~QObjectPrivate()
185	{
186	auto thisThreadData = threadData.loadRelaxed();
187	if (extraData && !extraData->runningTimers.isEmpty()) {
188	if (Q_LIKELY(thisThreadData->thread.loadAcquire() == QThread::currentThread())) {
189	// unregister pending timers
190	if (thisThreadData->hasEventDispatcher())
191	thisThreadData->eventDispatcher.loadRelaxed()->unregisterTimers(object: q_ptr);
192
193	// release the timer ids back to the pool
194	for (auto id : std::as_const(t&: extraData->runningTimers))
195	QAbstractEventDispatcherPrivate::releaseTimerId(id);
196	} else {
197	qWarning(msg: "QObject::~QObject: Timers cannot be stopped from another thread");
198	}
199	}
200
201	if (postedEvents.loadRelaxed())
202	QCoreApplication::removePostedEvents(receiver: q_ptr, eventType: 0);
203
204	thisThreadData->deref();
205
206	if (metaObject)
207	metaObject->objectDestroyed(q_ptr);
208
209	delete extraData;
210	}
211
212	/*!
213	\internal
214	For a given metaobject, compute the signal offset, and the method offset (including signals)
215	*/
216	static void computeOffsets(const QMetaObject *metaobject, int *signalOffset, int *methodOffset)
217	{
218	*signalOffset = *methodOffset = 0;
219	const QMetaObject *m = metaobject->d.superdata;
220	while (m) {
221	const QMetaObjectPrivate *d = QMetaObjectPrivate::get(metaobject: m);
222	*methodOffset += d->methodCount;
223	Q_ASSERT(d->revision >= 4);
224	*signalOffset += d->signalCount;
225	m = m->d.superdata;
226	}
227	}
228
229	// Used by QAccessibleWidget
230	QObjectList QObjectPrivate::receiverList(const char *signal) const
231	{
232	QObjectList returnValue;
233	int signal_index = signalIndex(signalName: signal);
234	ConnectionData *cd = connections.loadAcquire();
235	if (signal_index < 0 || !cd)
236	return returnValue;
237	if (signal_index < cd->signalVectorCount()) {
238	const QObjectPrivate::Connection *c = cd->signalVector.loadRelaxed()->at(i: signal_index).first.loadRelaxed();
239
240	while (c) {
241	QObject *r = c->receiver.loadRelaxed();
242	if (r)
243	returnValue << r;
244	c = c->nextConnectionList.loadRelaxed();
245	}
246	}
247	return returnValue;
248	}
249
250	/*!
251	\internal
252	The signalSlotLock() of the sender must be locked while calling this function
253	*/
254	inline void QObjectPrivate::ensureConnectionData()
255	{
256	if (connections.loadRelaxed())
257	return;
258	ConnectionData *cd = new ConnectionData;
259	cd->ref.ref();
260	connections.storeRelease(newValue: cd);
261	}
262
263	/*!
264	\internal
265	Add the connection \a c to the list of connections of the sender's object
266	for the specified \a signal
267
268	The signalSlotLock() of the sender and receiver must be locked while calling
269	this function
270
271	Will also add the connection in the sender's list of the receiver.
272	*/
273	inline void QObjectPrivate::addConnection(int signal, Connection *c)
274	{
275	Q_ASSERT(c->sender == q_ptr);
276	ensureConnectionData();
277	ConnectionData *cd = connections.loadRelaxed();
278	cd->resizeSignalVector(size: signal + 1);
279
280	ConnectionList &connectionList = cd->connectionsForSignal(signal);
281	if (connectionList.last.loadRelaxed()) {
282	Q_ASSERT(connectionList.last.loadRelaxed()->receiver.loadRelaxed());
283	connectionList.last.loadRelaxed()->nextConnectionList.storeRelaxed(newValue: c);
284	} else {
285	connectionList.first.storeRelaxed(newValue: c);
286	}
287	c->id = ++cd->currentConnectionId;
288	c->prevConnectionList = connectionList.last.loadRelaxed();
289	connectionList.last.storeRelaxed(newValue: c);
290
291	QObjectPrivate *rd = QObjectPrivate::get(o: c->receiver.loadRelaxed());
292	rd->ensureConnectionData();
293
294	c->prev = &(rd->connections.loadRelaxed()->senders);
295	c->next = *c->prev;
296	*c->prev = c;
297	if (c->next)
298	c->next->prev = &c->next;
299	}
300
301	void QObjectPrivate::ConnectionData::removeConnection(QObjectPrivate::Connection *c)
302	{
303	Q_ASSERT(c->receiver.loadRelaxed());
304	ConnectionList &connections = signalVector.loadRelaxed()->at(i: c->signal_index);
305	c->receiver.storeRelaxed(newValue: nullptr);
306	QThreadData *td = c->receiverThreadData.loadRelaxed();
307	if (td)
308	td->deref();
309	c->receiverThreadData.storeRelaxed(newValue: nullptr);
310
311	#ifndef QT_NO_DEBUG
312	bool found = false;
313	for (Connection *cc = connections.first.loadRelaxed(); cc; cc = cc->nextConnectionList.loadRelaxed()) {
314	if (cc == c) {
315	found = true;
316	break;
317	}
318	}
319	Q_ASSERT(found);
320	#endif
321
322	// remove from the senders linked list
323	*c->prev = c->next;
324	if (c->next)
325	c->next->prev = c->prev;
326	c->prev = nullptr;
327
328	if (connections.first.loadRelaxed() == c)
329	connections.first.storeRelaxed(newValue: c->nextConnectionList.loadRelaxed());
330	if (connections.last.loadRelaxed() == c)
331	connections.last.storeRelaxed(newValue: c->prevConnectionList);
332	Q_ASSERT(signalVector.loadRelaxed()->at(c->signal_index).first.loadRelaxed() != c);
333	Q_ASSERT(signalVector.loadRelaxed()->at(c->signal_index).last.loadRelaxed() != c);
334
335	// keep c->nextConnectionList intact, as it might still get accessed by activate
336	Connection *n = c->nextConnectionList.loadRelaxed();
337	if (n)
338	n->prevConnectionList = c->prevConnectionList;
339	if (c->prevConnectionList)
340	c->prevConnectionList->nextConnectionList.storeRelaxed(newValue: n);
341	c->prevConnectionList = nullptr;
342
343	Q_ASSERT(c != static_cast<Connection *>(orphaned.load(std::memory_order_relaxed)));
344	// add c to orphanedConnections
345	TaggedSignalVector o = nullptr;
346	/* No ABA issue here: When adding a node, we only care about the list head, it doesn't
347	* matter if the tail changes.
348	*/
349	o = orphaned.load(m: std::memory_order_acquire);
350	do {
351	c->nextInOrphanList = o;
352	} while (!orphaned.compare_exchange_strong(e&: o, i: TaggedSignalVector(c), m: std::memory_order_release));
353
354	#ifndef QT_NO_DEBUG
355	found = false;
356	for (Connection *cc = connections.first.loadRelaxed(); cc; cc = cc->nextConnectionList.loadRelaxed()) {
357	if (cc == c) {
358	found = true;
359	break;
360	}
361	}
362	Q_ASSERT(!found);
363	#endif
364
365	}
366
367	void QObjectPrivate::ConnectionData::cleanOrphanedConnectionsImpl(QObject *sender, LockPolicy lockPolicy)
368	{
369	QBasicMutex *senderMutex = signalSlotLock(o: sender);
370	TaggedSignalVector c = nullptr;
371	{
372	std::unique_lock<QBasicMutex> lock(*senderMutex, std::defer_lock_t{});
373	if (lockPolicy == NeedToLock)
374	lock.lock();
375	if (ref.loadAcquire() > 1)
376	return;
377
378	// Since ref == 1, no activate() is in process since we locked the mutex. That implies,
379	// that nothing can reference the orphaned connection objects anymore and they can
380	// be safely deleted
381	c = orphaned.exchange(i: nullptr, m: std::memory_order_relaxed);
382	}
383	if (c) {
384	// Deleting c might run arbitrary user code, so we must not hold the lock
385	if (lockPolicy == AlreadyLockedAndTemporarilyReleasingLock) {
386	senderMutex->unlock();
387	deleteOrphaned(o: c);
388	senderMutex->lock();
389	} else {
390	deleteOrphaned(o: c);
391	}
392	}
393	}
394
395	inline void QObjectPrivate::ConnectionData::deleteOrphaned(TaggedSignalVector o)
396	{
397	while (o) {
398	TaggedSignalVector next = nullptr;
399	if (SignalVector *v = static_cast<SignalVector *>(o)) {
400	next = v->nextInOrphanList;
401	free(ptr: v);
402	} else {
403	QObjectPrivate::Connection *c = static_cast<Connection *>(o);
404	next = c->nextInOrphanList;
405	Q_ASSERT(!c->receiver.loadRelaxed());
406	Q_ASSERT(!c->prev);
407	c->freeSlotObject();
408	c->deref();
409	}
410	o = next;
411	}
412	}
413
414	/*! \internal
415
416	Returns \c true if the signal with index \a signal_index from object \a sender is connected.
417
418	\a signal_index must be the index returned by QObjectPrivate::signalIndex;
419	*/
420	bool QObjectPrivate::isSignalConnected(uint signalIndex, bool checkDeclarative) const
421	{
422	if (checkDeclarative && isDeclarativeSignalConnected(signal_index: signalIndex))
423	return true;
424
425	ConnectionData *cd = connections.loadAcquire();
426	if (!cd)
427	return false;
428	SignalVector *signalVector = cd->signalVector.loadRelaxed();
429	if (!signalVector)
430	return false;
431
432	if (signalVector->at(i: -1).first.loadRelaxed())
433	return true;
434
435	if (signalIndex < uint(cd->signalVectorCount())) {
436	const QObjectPrivate::Connection *c = signalVector->at(i: signalIndex).first.loadRelaxed();
437	while (c) {
438	if (c->receiver.loadRelaxed())
439	return true;
440	c = c->nextConnectionList.loadRelaxed();
441	}
442	}
443	return false;
444	}
445
446	bool QObjectPrivate::maybeSignalConnected(uint signalIndex) const
447	{
448	ConnectionData *cd = connections.loadAcquire();
449	if (!cd)
450	return false;
451	SignalVector *signalVector = cd->signalVector.loadRelaxed();
452	if (!signalVector)
453	return false;
454
455	if (signalVector->at(i: -1).first.loadAcquire())
456	return true;
457
458	if (signalIndex < uint(cd->signalVectorCount())) {
459	const QObjectPrivate::Connection *c = signalVector->at(i: signalIndex).first.loadAcquire();
460	return c != nullptr;
461	}
462	return false;
463	}
464
465	void QObjectPrivate::reinitBindingStorageAfterThreadMove()
466	{
467	bindingStorage.reinitAfterThreadMove();
468	for (int i = 0; i < children.size(); ++i)
469	children[i]->d_func()->reinitBindingStorageAfterThreadMove();
470	}
471
472	/*!
473	\internal
474	*/
475	QAbstractMetaCallEvent::~QAbstractMetaCallEvent()
476	{
477	#if QT_CONFIG(thread)
478	if (semaphore_)
479	semaphore_->release();
480	#endif
481	}
482
483	/*!
484	\internal
485	*/
486	inline void QMetaCallEvent::allocArgs()
487	{
488	if (!d.nargs_)
489	return;
490
491	constexpr size_t each = sizeof(void*) + sizeof(QMetaType);
492	void *const memory = d.nargs_ * each > sizeof(prealloc_) ?
493	calloc(nmemb: d.nargs_, size: each) : prealloc_;
494
495	Q_CHECK_PTR(memory);
496	d.args_ = static_cast<void **>(memory);
497	}
498
499	/*!
500	\internal
501
502	Used for blocking queued connections, just passes \a args through without
503	allocating any memory.
504	*/
505	QMetaCallEvent::QMetaCallEvent(ushort method_offset, ushort method_relative,
506	QObjectPrivate::StaticMetaCallFunction callFunction,
507	const QObject *sender, int signalId,
508	void **args, QSemaphore *semaphore)
509	: QAbstractMetaCallEvent(sender, signalId, semaphore),
510	d({.slotObj_: nullptr, .args_: args, .callFunction_: callFunction, .nargs_: 0, .method_offset_: method_offset, .method_relative_: method_relative}),
511	prealloc_()
512	{
513	}
514
515	/*!
516	\internal
517
518	Used for blocking queued connections, just passes \a args through without
519	allocating any memory.
520	*/
521	QMetaCallEvent::QMetaCallEvent(QtPrivate::QSlotObjectBase *slotO,
522	const QObject *sender, int signalId,
523	void **args, QSemaphore *semaphore)
524	: QAbstractMetaCallEvent(sender, signalId, semaphore),
525	d({.slotObj_: QtPrivate::SlotObjUniquePtr{slotO}, .args_: args, .callFunction_: nullptr, .nargs_: 0, .method_offset_: 0, .method_relative_: ushort(-1)}),
526	prealloc_()
527	{
528	if (d.slotObj_)
529	d.slotObj_->ref();
530	}
531
532	/*!
533	\internal
534
535	Used for blocking queued connections, just passes \a args through without
536	allocating any memory.
537	*/
538	QMetaCallEvent::QMetaCallEvent(QtPrivate::SlotObjUniquePtr slotO,
539	const QObject *sender, int signalId,
540	void **args, QSemaphore *semaphore)
541	: QAbstractMetaCallEvent(sender, signalId, semaphore),
542	d{.slotObj_: std::move(slotO), .args_: args, .callFunction_: nullptr, .nargs_: 0, .method_offset_: 0, .method_relative_: ushort(-1)},
543	prealloc_()
544	{
545	}
546
547	/*!
548	\internal
549
550	Allocates memory for \a nargs; code creating an event needs to initialize
551	the void* and int arrays by accessing \a args() and \a types(), respectively.
552	*/
553	QMetaCallEvent::QMetaCallEvent(ushort method_offset, ushort method_relative,
554	QObjectPrivate::StaticMetaCallFunction callFunction,
555	const QObject *sender, int signalId,
556	int nargs)
557	: QAbstractMetaCallEvent(sender, signalId),
558	d({.slotObj_: nullptr, .args_: nullptr, .callFunction_: callFunction, .nargs_: nargs, .method_offset_: method_offset, .method_relative_: method_relative}),
559	prealloc_()
560	{
561	allocArgs();
562	}
563
564	/*!
565	\internal
566
567	Allocates memory for \a nargs; code creating an event needs to initialize
568	the void* and int arrays by accessing \a args() and \a types(), respectively.
569	*/
570	QMetaCallEvent::QMetaCallEvent(QtPrivate::QSlotObjectBase *slotO,
571	const QObject *sender, int signalId,
572	int nargs)
573	: QAbstractMetaCallEvent(sender, signalId),
574	d({.slotObj_: QtPrivate::SlotObjUniquePtr(slotO), .args_: nullptr, .callFunction_: nullptr, .nargs_: nargs, .method_offset_: 0, .method_relative_: ushort(-1)}),
575	prealloc_()
576	{
577	if (d.slotObj_)
578	d.slotObj_->ref();
579	allocArgs();
580	}
581
582	/*!
583	\internal
584
585	Allocates memory for \a nargs; code creating an event needs to initialize
586	the void* and int arrays by accessing \a args() and \a types(), respectively.
587	*/
588	QMetaCallEvent::QMetaCallEvent(QtPrivate::SlotObjUniquePtr slotO,
589	const QObject *sender, int signalId,
590	int nargs)
591	: QAbstractMetaCallEvent(sender, signalId),
592	d{.slotObj_: std::move(slotO), .args_: nullptr, .callFunction_: nullptr, .nargs_: nargs, .method_offset_: 0, .method_relative_: ushort(-1)},
593	prealloc_()
594	{
595	allocArgs();
596	}
597
598	/*!
599	\internal
600	*/
601	QMetaCallEvent::~QMetaCallEvent()
602	{
603	if (d.nargs_) {
604	QMetaType *t = types();
605	for (int i = 0; i < d.nargs_; ++i) {
606	if (t[i].isValid() && d.args_[i])
607	t[i].destroy(data: d.args_[i]);
608	}
609	if (reinterpret_cast<void *>(d.args_) != reinterpret_cast<void *>(prealloc_))
610	free(ptr: d.args_);
611	}
612	}
613
614	/*!
615	\internal
616	*/
617	void QMetaCallEvent::placeMetaCall(QObject *object)
618	{
619	if (d.slotObj_) {
620	d.slotObj_->call(r: object, a: d.args_);
621	} else if (d.callFunction_ && d.method_offset_ <= object->metaObject()->methodOffset()) {
622	d.callFunction_(object, QMetaObject::InvokeMetaMethod, d.method_relative_, d.args_);
623	} else {
624	QMetaObject::metacall(object, QMetaObject::InvokeMetaMethod,
625	d.method_offset_ + d.method_relative_, d.args_);
626	}
627	}
628
629	QMetaCallEvent* QMetaCallEvent::create_impl(QtPrivate::SlotObjUniquePtr slotObj,
630	const QObject *sender, int signal_index,
631	size_t argc, const void* const argp[],
632	const QMetaType metaTypes[])
633	{
634	auto metaCallEvent = std::make_unique<QMetaCallEvent>(args: std::move(slotObj), args&: sender,
635	args&: signal_index, args: int(argc));
636
637	void **args = metaCallEvent->args();
638	QMetaType *types = metaCallEvent->types();
639	for (size_t i = 0; i < argc; ++i) {
640	types[i] = metaTypes[i];
641	args[i] = types[i].create(copy: argp[i]);
642	Q_CHECK_PTR(!i || args[i]);
643	}
644
645	return metaCallEvent.release();
646	}
647
648	/*!
649	\class QSignalBlocker
650	\brief Exception-safe wrapper around QObject::blockSignals().
651	\since 5.3
652	\ingroup objectmodel
653	\inmodule QtCore
654
655	\reentrant
656
657	QSignalBlocker can be used wherever you would otherwise use a
658	pair of calls to QObject::blockSignals(). It blocks signals in its
659	constructor and in the destructor it resets the state to what
660	it was before the constructor ran.
661
662	\snippet code/src_corelib_kernel_qobject.cpp 53
663	is thus equivalent to
664	\snippet code/src_corelib_kernel_qobject.cpp 54
665
666	except the code using QSignalBlocker is safe in the face of
667	exceptions.
668
669	\sa QMutexLocker, QEventLoopLocker
670	*/
671
672	/*!
673	\fn QSignalBlocker::QSignalBlocker(QObject *object)
674
675	Constructor. Calls \a{object}->blockSignals(true).
676	*/
677
678	/*!
679	\fn QSignalBlocker::QSignalBlocker(QObject &object)
680	\overload
681
682	Calls \a{object}.blockSignals(true).
683	*/
684
685	/*!
686	\fn QSignalBlocker::QSignalBlocker(QSignalBlocker &&other)
687
688	Move-constructs a signal blocker from \a other. \a other will have
689	a no-op destructor, while responsibility for restoring the
690	QObject::signalsBlocked() state is transferred to the new object.
691	*/
692
693	/*!
694	\fn QSignalBlocker &QSignalBlocker::operator=(QSignalBlocker &&other)
695
696	Move-assigns this signal blocker from \a other. \a other will have
697	a no-op destructor, while responsibility for restoring the
698	QObject::signalsBlocked() state is transferred to this object.
699
700	The object's signals this signal blocker was blocking prior to
701	being moved to, if any, are unblocked \e except in the case where
702	both instances block the same object's signals and \c *this is
703	unblocked while \a other is not, at the time of the move.
704	*/
705
706	/*!
707	\fn QSignalBlocker::~QSignalBlocker()
708
709	Destructor. Restores the QObject::signalsBlocked() state to what it
710	was before the constructor ran, unless unblock() has been called
711	without a following reblock(), in which case it does nothing.
712	*/
713
714	/*!
715	\fn void QSignalBlocker::reblock()
716
717	Re-blocks signals after a previous unblock().
718
719	The numbers of reblock() and unblock() calls are not counted, so
720	every reblock() undoes any number of unblock() calls.
721	*/
722
723	/*!
724	\fn void QSignalBlocker::unblock()
725
726	Temporarily restores the QObject::signalsBlocked() state to what
727	it was before this QSignalBlocker's constructor ran. To undo, use
728	reblock().
729
730	The numbers of reblock() and unblock() calls are not counted, so
731	every unblock() undoes any number of reblock() calls.
732	*/
733
734	/*!
735	\fn void QSignalBlocker::dismiss()
736	\since 6.7
737	Dismisses the QSignalBlocker. It will no longer access the QObject
738	passed to its constructor. unblock(), reblock(), as well as
739	~QSignalBlocker() will have no effect.
740	*/
741
742	/*!
743	\class QObject
744	\inmodule QtCore
745	\brief The QObject class is the base class of all Qt objects.
746
747	\ingroup objectmodel
748
749	\reentrant
750
751	QObject is the heart of the Qt \l{Object Model}. The central
752	feature in this model is a very powerful mechanism for seamless
753	object communication called \l{signals and slots}. You can
754	connect a signal to a slot with connect() and destroy the
755	connection with disconnect(). To avoid never ending notification
756	loops you can temporarily block signals with blockSignals(). The
757	protected functions connectNotify() and disconnectNotify() make
758	it possible to track connections.
759
760	QObjects organize themselves in \l {Object Trees & Ownership}
761	{object trees}. When you create a QObject with another object as
762	parent, the object will automatically add itself to the parent's
763	children() list. The parent takes ownership of the object; i.e.,
764	it will automatically delete its children in its destructor. You
765	can look for an object by name and optionally type using
766	findChild() or findChildren().
767
768	Every object has an objectName() and its class name can be found
769	via the corresponding metaObject() (see QMetaObject::className()).
770	You can determine whether the object's class inherits another
771	class in the QObject inheritance hierarchy by using the
772	inherits() function.
773
774	When an object is deleted, it emits a destroyed() signal. You can
775	catch this signal to avoid dangling references to QObjects.
776
777	QObjects can receive events through event() and filter the events
778	of other objects. See installEventFilter() and eventFilter() for
779	details. A convenience handler, childEvent(), can be reimplemented
780	to catch child events.
781
782	Last but not least, QObject provides the basic timer support in
783	Qt; see QChronoTimer for high-level support for timers.
784
785	Notice that the Q_OBJECT macro is mandatory for any object that
786	implements signals, slots or properties. You also need to run the
787	\l{moc}{Meta Object Compiler} on the source file. We strongly
788	recommend the use of this macro in all subclasses of QObject
789	regardless of whether or not they actually use signals, slots and
790	properties, since failure to do so may lead certain functions to
791	exhibit strange behavior.
792
793	All Qt widgets inherit QObject. The convenience function
794	isWidgetType() returns whether an object is actually a widget. It
795	is much faster than
796	\l{qobject_cast()}{qobject_cast}<QWidget *>(\e{obj}) or
797	\e{obj}->\l{inherits()}{inherits}("QWidget").
798
799	Some QObject functions, e.g. children(), return a QObjectList.
800	QObjectList is a typedef for QList<QObject *>.
801
802	\section1 Thread Affinity
803
804	A QObject instance is said to have a \e{thread affinity}, or that
805	it \e{lives} in a certain thread. When a QObject receives a
806	\l{Qt::QueuedConnection}{queued signal} or a \l{The Event
807	System#Sending Events}{posted event}, the slot or event handler
808	will run in the thread that the object lives in.
809
810	\note If a QObject has no thread affinity (that is, if thread()
811	returns zero), or if it lives in a thread that has no running event
812	loop, then it cannot receive queued signals or posted events.
813
814	By default, a QObject lives in the thread in which it is created.
815	An object's thread affinity can be queried using thread() and
816	changed using moveToThread().
817
818	All QObjects must live in the same thread as their parent. Consequently:
819
820	\list
821	\li setParent() will fail if the two QObjects involved live in
822	different threads.
823	\li When a QObject is moved to another thread, all its children
824	will be automatically moved too.
825	\li moveToThread() will fail if the QObject has a parent.
826	\li If QObjects are created within QThread::run(), they cannot
827	become children of the QThread object because the QThread does
828	not live in the thread that calls QThread::run().
829	\endlist
830
831	\note A QObject's member variables \e{do not} automatically become
832	its children. The parent-child relationship must be set by either
833	passing a pointer to the child's \l{QObject()}{constructor}, or by
834	calling setParent(). Without this step, the object's member variables
835	will remain in the old thread when moveToThread() is called.
836
837	\target No copy constructor
838	\section1 No Copy Constructor or Assignment Operator
839
840	QObject has neither a copy constructor nor an assignment operator.
841	This is by design. Actually, they are declared, but in a
842	\c{private} section with the macro Q_DISABLE_COPY(). In fact, all
843	Qt classes derived from QObject (direct or indirect) use this
844	macro to declare their copy constructor and assignment operator to
845	be private. The reasoning is found in the discussion on
846	\l{Identity vs Value} {Identity vs Value} on the Qt \l{Object
847	Model} page.
848
849	The main consequence is that you should use pointers to QObject
850	(or to your QObject subclass) where you might otherwise be tempted
851	to use your QObject subclass as a value. For example, without a
852	copy constructor, you can't use a subclass of QObject as the value
853	to be stored in one of the container classes. You must store
854	pointers.
855
856	\section1 Auto-Connection
857
858	Qt's meta-object system provides a mechanism to automatically connect
859	signals and slots between QObject subclasses and their children. As long
860	as objects are defined with suitable object names, and slots follow a
861	simple naming convention, this connection can be performed at run-time
862	by the QMetaObject::connectSlotsByName() function.
863
864	\l uic generates code that invokes this function to enable
865	auto-connection to be performed between widgets on forms created
866	with \e{\QD}. More information about using auto-connection with \e{\QD} is
867	given in the \l{Using a Designer UI File in Your Application} section of
868	the \l{Qt Widgets Designer Manual}{\QD} manual.
869
870	\section1 Dynamic Properties
871
872	Dynamic properties can be added to and removed from QObject
873	instances at run-time. Dynamic properties do not need to be declared at
874	compile-time, yet they provide the same advantages as static properties
875	and are manipulated using the same API - using property() to read them
876	and setProperty() to write them.
877
878	Dynamic properties are supported by
879	\l{Qt Widgets Designer's Widget Editing Mode#The Property Editor}{\QD},
880	and both standard Qt widgets and user-created forms can be given dynamic
881	properties.
882
883	\section1 Internationalization (I18n)
884
885	All QObject subclasses support Qt's translation features, making it possible
886	to translate an application's user interface into different languages.
887
888	To make user-visible text translatable, it must be wrapped in calls to
889	the tr() function. This is explained in detail in the
890	\l{Writing Source Code for Translation} document.
891
892	\sa QMetaObject, QPointer, QObjectCleanupHandler, Q_DISABLE_COPY()
893	\sa {Object Trees & Ownership}
894	*/
895
896	/*****************************************************************************
897	QObject member functions
898	*****************************************************************************/
899
900	// check the constructor's parent thread argument
901	static bool check_parent_thread(QObject *parent,
902	QThreadData *parentThreadData,
903	QThreadData *currentThreadData)
904	{
905	if (parent && parentThreadData != currentThreadData) {
906	QThread *parentThread = parentThreadData->thread.loadAcquire();
907	QThread *currentThread = currentThreadData->thread.loadAcquire();
908	qWarning(msg: "QObject: Cannot create children for a parent that is in a different thread.\n"
909	"(Parent is %s(%p), parent's thread is %s(%p), current thread is %s(%p)",
910	parent->metaObject()->className(),
911	parent,
912	parentThread ? parentThread->metaObject()->className() : "QThread",
913	parentThread,
914	currentThread ? currentThread->metaObject()->className() : "QThread",
915	currentThread);
916	return false;
917	}
918	return true;
919	}
920
921	/*!
922	Constructs an object with parent object \a parent.
923
924	The parent of an object may be viewed as the object's owner. For
925	instance, a \l{QDialog}{dialog box} is the parent of the \uicontrol{OK}
926	and \uicontrol{Cancel} buttons it contains.
927
928	The destructor of a parent object destroys all child objects.
929
930	Setting \a parent to \nullptr constructs an object with no parent. If the
931	object is a widget, it will become a top-level window.
932
933	\sa parent(), findChild(), findChildren()
934	*/
935
936	QObject::QObject(QObject *parent)
937	: QObject(*new QObjectPrivate, parent)
938	{
939	}
940
941	/*!
942	\internal
943	*/
944	QObject::QObject(QObjectPrivate &dd, QObject *parent)
945	: d_ptr(&dd)
946	{
947	Q_ASSERT_X(this != parent, Q_FUNC_INFO, "Cannot parent a QObject to itself");
948
949	Q_D(QObject);
950	d_ptr->q_ptr = this;
951	auto threadData = (parent && !parent->thread()) ? parent->d_func()->threadData.loadRelaxed() : QThreadData::current();
952	threadData->ref();
953	d->threadData.storeRelaxed(newValue: threadData);
954	if (parent) {
955	QT_TRY {
956	if (!check_parent_thread(parent, parentThreadData: parent ? parent->d_func()->threadData.loadRelaxed() : nullptr, currentThreadData: threadData))
957	parent = nullptr;
958	if (d->willBeWidget) {
959	if (parent) {
960	d->parent = parent;
961	d->parent->d_func()->children.append(t: this);
962	}
963	// no events sent here, this is done at the end of the QWidget constructor
964	} else {
965	setParent(parent);
966	}
967	} QT_CATCH(...) {
968	threadData->deref();
969	QT_RETHROW;
970	}
971	}
972	if (Q_UNLIKELY(qtHookData[QHooks::AddQObject]))
973	reinterpret_cast<QHooks::AddQObjectCallback>(qtHookData[QHooks::AddQObject])(this);
974	Q_TRACE(QObject_ctor, this);
975	}
976
977	void QObjectPrivate::clearBindingStorage()
978	{
979	bindingStorage.clear();
980	}
981
982	/*!
983	Destroys the object, deleting all its child objects.
984
985	All signals to and from the object are automatically disconnected, and
986	any pending posted events for the object are removed from the event
987	queue. However, it is often safer to use deleteLater() rather than
988	deleting a QObject subclass directly.
989
990	\warning All child objects are deleted. If any of these objects
991	are on the stack or global, sooner or later your program will
992	crash. We do not recommend holding pointers to child objects from
993	outside the parent. If you still do, the destroyed() signal gives
994	you an opportunity to detect when an object is destroyed.
995
996	\warning Deleting a QObject while it is handling an event
997	delivered to it can cause a crash. You must not delete the QObject
998	directly if it exists in a different thread than the one currently
999	executing. Use deleteLater() instead, which will cause the event
1000	loop to delete the object after all pending events have been
1001	delivered to it.
1002
1003	\sa deleteLater()
1004	*/
1005
1006	QObject::~QObject()
1007	{
1008	Q_D(QObject);
1009	d->wasDeleted = true;
1010	d->blockSig = 0; // unblock signals so we always emit destroyed()
1011
1012	if (!d->bindingStorage.isValid()) {
1013	// this might be the case after an incomplete thread-move
1014	// remove this object from the pending list in that case
1015	if (QThread *ownThread = thread()) {
1016	auto *privThread = static_cast<QThreadPrivate *>(
1017	QObjectPrivate::get(o: ownThread));
1018	privThread->removeObjectWithPendingBindingStatusChange(obj: this);
1019	}
1020	}
1021
1022	// If we reached this point, we need to clear the binding data
1023	// as the corresponding properties are no longer useful
1024	d->clearBindingStorage();
1025
1026	QtSharedPointer::ExternalRefCountData *sharedRefcount = d->sharedRefcount.loadRelaxed();
1027	if (sharedRefcount) {
1028	if (sharedRefcount->strongref.loadRelaxed() > 0) {
1029	qWarning(msg: "QObject: shared QObject was deleted directly. The program is malformed and may crash.");
1030	// but continue deleting, it's too late to stop anyway
1031	}
1032
1033	// indicate to all QWeakPointers that this QObject has now been deleted
1034	sharedRefcount->strongref.storeRelaxed(newValue: 0);
1035	if (!sharedRefcount->weakref.deref())
1036	delete sharedRefcount;
1037	}
1038
1039	if (!d->wasWidget && d->isSignalConnected(signalIndex: 0)) {
1040	emit destroyed(this);
1041	}
1042
1043	if (!d->isDeletingChildren && d->declarativeData && QAbstractDeclarativeData::destroyed)
1044	QAbstractDeclarativeData::destroyed(d->declarativeData, this);
1045
1046	QObjectPrivate::ConnectionData *cd = d->connections.loadAcquire();
1047	if (cd) {
1048	if (cd->currentSender) {
1049	cd->currentSender->receiverDeleted();
1050	cd->currentSender = nullptr;
1051	}
1052
1053	QBasicMutex *signalSlotMutex = signalSlotLock(o: this);
1054	QMutexLocker locker(signalSlotMutex);
1055
1056	// disconnect all receivers
1057	int receiverCount = cd->signalVectorCount();
1058	for (int signal = -1; signal < receiverCount; ++signal) {
1059	QObjectPrivate::ConnectionList &connectionList = cd->connectionsForSignal(signal);
1060
1061	while (QObjectPrivate::Connection *c = connectionList.first.loadRelaxed()) {
1062	Q_ASSERT(c->receiver.loadAcquire());
1063
1064	QBasicMutex *m = signalSlotLock(o: c->receiver.loadRelaxed());
1065	bool needToUnlock = QOrderedMutexLocker::relock(mtx1: signalSlotMutex, mtx2: m);
1066	if (c == connectionList.first.loadAcquire() && c->receiver.loadAcquire()) {
1067	cd->removeConnection(c);
1068	Q_ASSERT(connectionList.first.loadRelaxed() != c);
1069	}
1070	if (needToUnlock)
1071	m->unlock();
1072	}
1073	}
1074
1075	/* Disconnect all senders:
1076	*/
1077	while (QObjectPrivate::Connection *node = cd->senders) {
1078	Q_ASSERT(node->receiver.loadAcquire());
1079	QObject *sender = node->sender;
1080	// Send disconnectNotify before removing the connection from sender's connection list.
1081	// This ensures any eventual destructor of sender will block on getting receiver's lock
1082	// and not finish until we release it.
1083	sender->disconnectNotify(signal: QMetaObjectPrivate::signal(m: sender->metaObject(), signal_index: node->signal_index));
1084	QBasicMutex *m = signalSlotLock(o: sender);
1085	bool needToUnlock = QOrderedMutexLocker::relock(mtx1: signalSlotMutex, mtx2: m);
1086	//the node has maybe been removed while the mutex was unlocked in relock?
1087	if (node != cd->senders) {
1088	// We hold the wrong mutex
1089	Q_ASSERT(needToUnlock);
1090	m->unlock();
1091	continue;
1092	}
1093
1094	QObjectPrivate::ConnectionData *senderData = sender->d_func()->connections.loadRelaxed();
1095	Q_ASSERT(senderData);
1096
1097	QtPrivate::QSlotObjectBase *slotObj = nullptr;
1098	if (node->isSlotObject) {
1099	slotObj = node->slotObj;
1100	node->isSlotObject = false;
1101	}
1102
1103	senderData->removeConnection(c: node);
1104	/*
1105	When we unlock, another thread has the chance to delete/modify sender data.
1106	Thus we need to call cleanOrphanedConnections before unlocking. We use the
1107	variant of the function which assumes that the lock is already held to avoid
1108	a deadlock.
1109	We need to hold m, the sender lock. Considering that we might execute arbitrary user
1110	code, we should already release the signalSlotMutex here – unless they are the same.
1111	*/
1112	const bool locksAreTheSame = signalSlotMutex == m;
1113	if (!locksAreTheSame)
1114	locker.unlock();
1115	senderData->cleanOrphanedConnections(
1116	sender,
1117	lockPolicy: QObjectPrivate::ConnectionData::AlreadyLockedAndTemporarilyReleasingLock
1118	);
1119	if (needToUnlock)
1120	m->unlock();
1121
1122	if (locksAreTheSame) // otherwise already unlocked
1123	locker.unlock();
1124	if (slotObj)
1125	slotObj->destroyIfLastRef();
1126	locker.relock();
1127	}
1128
1129	// invalidate all connections on the object and make sure
1130	// activate() will skip them
1131	cd->currentConnectionId.storeRelaxed(newValue: 0);
1132	}
1133	if (cd && !cd->ref.deref())
1134	delete cd;
1135	d->connections.storeRelaxed(newValue: nullptr);
1136
1137	if (!d->children.isEmpty())
1138	d->deleteChildren();
1139
1140	if (Q_UNLIKELY(qtHookData[QHooks::RemoveQObject]))
1141	reinterpret_cast<QHooks::RemoveQObjectCallback>(qtHookData[QHooks::RemoveQObject])(this);
1142
1143	Q_TRACE(QObject_dtor, this);
1144
1145	if (d->parent) // remove it from parent object
1146	d->setParent_helper(nullptr);
1147	}
1148
1149	inline QObjectPrivate::Connection::~Connection()
1150	{
1151	if (ownArgumentTypes) {
1152	const int *v = argumentTypes.loadRelaxed();
1153	if (v != &DIRECT_CONNECTION_ONLY)
1154	delete[] v;
1155	}
1156	if (isSlotObject)
1157	slotObj->destroyIfLastRef();
1158	}
1159
1160
1161	/*!
1162	\fn const QMetaObject *QObject::metaObject() const
1163
1164	Returns a pointer to the meta-object of this object.
1165
1166	A meta-object contains information about a class that inherits
1167	QObject, e.g. class name, superclass name, properties, signals and
1168	slots. Every QObject subclass that contains the Q_OBJECT macro will have a
1169	meta-object.
1170
1171	The meta-object information is required by the signal/slot
1172	connection mechanism and the property system. The inherits()
1173	function also makes use of the meta-object.
1174
1175	If you have no pointer to an actual object instance but still
1176	want to access the meta-object of a class, you can use \l
1177	staticMetaObject.
1178
1179	Example:
1180
1181	\snippet code/src_corelib_kernel_qobject.cpp 1
1182
1183	\sa staticMetaObject
1184	*/
1185
1186	/*!
1187	\variable QObject::staticMetaObject
1188
1189	This variable stores the meta-object for the class.
1190
1191	A meta-object contains information about a class that inherits
1192	QObject, e.g. class name, superclass name, properties, signals and
1193	slots. Every class that contains the Q_OBJECT macro will also have
1194	a meta-object.
1195
1196	The meta-object information is required by the signal/slot
1197	connection mechanism and the property system. The inherits()
1198	function also makes use of the meta-object.
1199
1200	If you have a pointer to an object, you can use metaObject() to
1201	retrieve the meta-object associated with that object.
1202
1203	Example:
1204
1205	\snippet code/src_corelib_kernel_qobject.cpp 2
1206
1207	\sa metaObject()
1208	*/
1209
1210	/*!
1211	\fn template <class T> T qobject_cast(QObject *object)
1212	\fn template <class T> T qobject_cast(const QObject *object)
1213	\relates QObject
1214
1215	Returns the given \a object cast to type T if the object is of type
1216	T (or of a subclass); otherwise returns \nullptr. If \a object is
1217	\nullptr then it will also return \nullptr.
1218
1219	The class T must inherit (directly or indirectly) QObject and be
1220	declared with the \l Q_OBJECT macro.
1221
1222	A class is considered to inherit itself.
1223
1224	Example:
1225
1226	\snippet code/src_corelib_kernel_qobject.cpp 3
1227
1228	The qobject_cast() function behaves similarly to the standard C++
1229	\c dynamic_cast(), with the advantages that it doesn't require
1230	RTTI support and it works across dynamic library boundaries.
1231
1232	qobject_cast() can also be used in conjunction with interfaces.
1233
1234	\warning If T isn't declared with the Q_OBJECT macro, this
1235	function's return value is undefined.
1236
1237	\sa QObject::inherits()
1238	*/
1239
1240	/*!
1241	\fn bool QObject::inherits(const char *className) const
1242
1243	Returns \c true if this object is an instance of a class that
1244	inherits \a className or a QObject subclass that inherits \a
1245	className; otherwise returns \c false.
1246
1247	A class is considered to inherit itself.
1248
1249	Example:
1250
1251	\snippet code/src_corelib_kernel_qobject.cpp 4
1252
1253	If you need to determine whether an object is an instance of a particular
1254	class for the purpose of casting it, consider using qobject_cast<Type *>(object)
1255	instead.
1256
1257	\sa metaObject(), qobject_cast()
1258	*/
1259
1260	/*!
1261	\property QObject::objectName
1262
1263	\brief the name of this object
1264
1265	You can find an object by name (and type) using findChild().
1266	You can find a set of objects with findChildren().
1267
1268	\snippet code/src_corelib_kernel_qobject.cpp 5
1269
1270	By default, this property contains an empty string.
1271
1272	\sa metaObject(), QMetaObject::className()
1273	*/
1274
1275	QString QObject::objectName() const
1276	{
1277	Q_D(const QObject);
1278	#if QT_CONFIG(thread)
1279	if (QThread::currentThreadId() != d->threadData.loadRelaxed()->threadId.loadRelaxed()) // Unsafe code path
1280	return d->extraData ? d->extraData->objectName.valueBypassingBindings() : QString();
1281	#endif
1282	if (!d->extraData && QtPrivate::isAnyBindingEvaluating()) {
1283	QObjectPrivate *dd = const_cast<QObjectPrivate *>(d);
1284	// extraData is mutable, so this should be safe
1285	dd->extraData = new QObjectPrivate::ExtraData(dd);
1286	}
1287	return d->extraData ? d->extraData->objectName : QString();
1288	}
1289
1290	/*!
1291	\fn void QObject::setObjectName(const QString &name)
1292	Sets the object's name to \a name.
1293	*/
1294	void QObject::doSetObjectName(const QString &name)
1295	{
1296	Q_D(QObject);
1297
1298	d->ensureExtraData();
1299
1300	d->extraData->objectName.removeBindingUnlessInWrapper();
1301
1302	if (d->extraData->objectName.valueBypassingBindings() != name) {
1303	d->extraData->objectName.setValueBypassingBindings(name);
1304	d->extraData->objectName.notify(); // also emits a signal
1305	}
1306	}
1307
1308	/*!
1309	\overload
1310	\since 6.4
1311	*/
1312	void QObject::setObjectName(QAnyStringView name)
1313	{
1314	Q_D(QObject);
1315
1316	d->ensureExtraData();
1317
1318	d->extraData->objectName.removeBindingUnlessInWrapper();
1319
1320	if (d->extraData->objectName.valueBypassingBindings() != name) {
1321	d->extraData->objectName.setValueBypassingBindings(name.toString());
1322	d->extraData->objectName.notify(); // also emits a signal
1323	}
1324	}
1325
1326	QBindable<QString> QObject::bindableObjectName()
1327	{
1328	Q_D(QObject);
1329
1330	d->ensureExtraData();
1331
1332	return QBindable<QString>(&d->extraData->objectName);
1333	}
1334
1335	/*! \fn void QObject::objectNameChanged(const QString &objectName)
1336
1337	This signal is emitted after the object's name has been changed. The new object name is passed as \a objectName.
1338
1339	\sa QObject::objectName
1340	*/
1341
1342	/*!
1343	\fn bool QObject::isWidgetType() const
1344
1345	Returns \c true if the object is a widget; otherwise returns \c false.
1346
1347	Calling this function is equivalent to calling
1348	\c{inherits("QWidget")}, except that it is much faster.
1349	*/
1350
1351	/*!
1352	\fn bool QObject::isWindowType() const
1353
1354	Returns \c true if the object is a window; otherwise returns \c false.
1355
1356	Calling this function is equivalent to calling
1357	\c{inherits("QWindow")}, except that it is much faster.
1358	*/
1359
1360	/*!
1361	\fn bool QObject::isQuickItemType() const
1362
1363	Returns \c true if the object is a QQuickItem; otherwise returns \c false.
1364
1365	Calling this function is equivalent to calling
1366	\c{inherits("QQuickItem")}, except that it is much faster.
1367
1368	\since 6.4
1369	*/
1370
1371	/*!
1372	This virtual function receives events to an object and should
1373	return true if the event \a e was recognized and processed.
1374
1375	The event() function can be reimplemented to customize the
1376	behavior of an object.
1377
1378	Make sure you call the parent event class implementation
1379	for all the events you did not handle.
1380
1381	Example:
1382
1383	\snippet code/src_corelib_kernel_qobject.cpp 52
1384
1385	\sa installEventFilter(), timerEvent(), QCoreApplication::sendEvent(),
1386	QCoreApplication::postEvent()
1387	*/
1388
1389	bool QObject::event(QEvent *e)
1390	{
1391	switch (e->type()) {
1392	case QEvent::Timer:
1393	timerEvent(event: (QTimerEvent *)e);
1394	break;
1395
1396	case QEvent::ChildAdded:
1397	case QEvent::ChildPolished:
1398	case QEvent::ChildRemoved:
1399	childEvent(event: (QChildEvent *)e);
1400	break;
1401
1402	case QEvent::DeferredDelete:
1403	delete this;
1404	break;
1405
1406	case QEvent::MetaCall:
1407	{
1408	QAbstractMetaCallEvent *mce = static_cast<QAbstractMetaCallEvent*>(e);
1409
1410	QObjectPrivate::ConnectionData *connections = d_func()->connections.loadAcquire();
1411	if (!connections) {
1412	QMutexLocker locker(signalSlotLock(o: this));
1413	d_func()->ensureConnectionData();
1414	connections = d_func()->connections.loadRelaxed();
1415	}
1416	QObjectPrivate::Sender sender(this, const_cast<QObject*>(mce->sender()), mce->signalId(), connections);
1417
1418	mce->placeMetaCall(object: this);
1419	break;
1420	}
1421
1422	case QEvent::ThreadChange: {
1423	Q_D(QObject);
1424	QThreadData *threadData = d->threadData.loadRelaxed();
1425	QAbstractEventDispatcher *eventDispatcher = threadData->eventDispatcher.loadRelaxed();
1426	if (eventDispatcher) {
1427	QList<QAbstractEventDispatcher::TimerInfoV2> timers = eventDispatcher->timersForObject(object: this);
1428	if (!timers.isEmpty()) {
1429	const bool res = eventDispatcher->unregisterTimers(object: this);
1430	// do not to release our timer ids back to the pool (since the timer ids are moving to a new thread).
1431	Q_ASSERT_X(res, Q_FUNC_INFO,
1432	"QAbstractEventDispatcher::unregisterTimers() returned false,"
1433	" but there are timers associated with this object.");
1434	auto reRegisterTimers = [this, timers = std::move(timers)]() {
1435	QAbstractEventDispatcher *eventDispatcher =
1436	d_func()->threadData.loadRelaxed()->eventDispatcher.loadRelaxed();
1437	for (const auto &ti : timers)
1438	eventDispatcher->registerTimer(timerId: ti.timerId, interval: ti.interval, timerType: ti.timerType, object: this);
1439	};
1440	QMetaObject::invokeMethod(object: this, function: std::move(reRegisterTimers), type: Qt::QueuedConnection);
1441	}
1442	}
1443	break;
1444	}
1445
1446	default:
1447	if (e->type() >= QEvent::User) {
1448	customEvent(event: e);
1449	break;
1450	}
1451	return false;
1452	}
1453	return true;
1454	}
1455
1456	/*!
1457	\fn void QObject::timerEvent(QTimerEvent *event)
1458
1459	This event handler can be reimplemented in a subclass to receive
1460	timer events for the object.
1461
1462	QChronoTimer provides higher-level interfaces to the timer functionality,
1463	and also more general information about timers. The timer event is passed
1464	in the \a event parameter.
1465
1466	\sa startTimer(), killTimer(), event()
1467	*/
1468
1469	void QObject::timerEvent(QTimerEvent *)
1470	{
1471	}
1472
1473
1474	/*!
1475	This event handler can be reimplemented in a subclass to receive
1476	child events. The event is passed in the \a event parameter.
1477
1478	QEvent::ChildAdded and QEvent::ChildRemoved events are sent to
1479	objects when children are added or removed. In both cases you can
1480	only rely on the child being a QObject, or if isWidgetType()
1481	returns \c true, a QWidget. (This is because, in the
1482	\l{QEvent::ChildAdded}{ChildAdded} case, the child is not yet
1483	fully constructed, and in the \l{QEvent::ChildRemoved}{ChildRemoved}
1484	case it might have been destructed already).
1485
1486	QEvent::ChildPolished events are sent to widgets when children
1487	are polished, or when polished children are added. If you receive
1488	a child polished event, the child's construction is usually
1489	completed. However, this is not guaranteed, and multiple polish
1490	events may be delivered during the execution of a widget's
1491	constructor.
1492
1493	For every child widget, you receive one
1494	\l{QEvent::ChildAdded}{ChildAdded} event, zero or more
1495	\l{QEvent::ChildPolished}{ChildPolished} events, and one
1496	\l{QEvent::ChildRemoved}{ChildRemoved} event.
1497
1498	The \l{QEvent::ChildPolished}{ChildPolished} event is omitted if
1499	a child is removed immediately after it is added. If a child is
1500	polished several times during construction and destruction, you
1501	may receive several child polished events for the same child,
1502	each time with a different virtual table.
1503
1504	\sa event()
1505	*/
1506
1507	void QObject::childEvent(QChildEvent * /* event */)
1508	{
1509	}
1510
1511
1512	/*!
1513	This event handler can be reimplemented in a subclass to receive
1514	custom events. Custom events are user-defined events with a type
1515	value at least as large as the QEvent::User item of the
1516	QEvent::Type enum, and is typically a QEvent subclass. The event
1517	is passed in the \a event parameter.
1518
1519	\sa event(), QEvent
1520	*/
1521	void QObject::customEvent(QEvent * /* event */)
1522	{
1523	}
1524
1525
1526
1527	/*!
1528	Filters events if this object has been installed as an event
1529	filter for the \a watched object.
1530
1531	In your reimplementation of this function, if you want to filter
1532	the \a event out, i.e. stop it being handled further, return
1533	true; otherwise return false.
1534
1535	Example:
1536	\snippet code/src_corelib_kernel_qobject.cpp 6
1537
1538	Notice in the example above that unhandled events are passed to
1539	the base class's eventFilter() function, since the base class
1540	might have reimplemented eventFilter() for its own internal
1541	purposes.
1542
1543	Some events, such as \l QEvent::ShortcutOverride must be explicitly
1544	accepted (by calling \l {QEvent::}{accept()} on them) in order to prevent
1545	propagation.
1546
1547	\warning If you delete the receiver object in this function, be
1548	sure to return true. Otherwise, Qt will forward the event to the
1549	deleted object and the program might crash.
1550
1551	\sa installEventFilter()
1552	*/
1553
1554	bool QObject::eventFilter(QObject * /* watched */, QEvent * /* event */)
1555	{
1556	return false;
1557	}
1558
1559	/*!
1560	\fn bool QObject::signalsBlocked() const
1561
1562	Returns \c true if signals are blocked; otherwise returns \c false.
1563
1564	Signals are not blocked by default.
1565
1566	\sa blockSignals(), QSignalBlocker
1567	*/
1568
1569	/*!
1570	If \a block is true, signals emitted by this object are blocked
1571	(i.e., emitting a signal will not invoke anything connected to it).
1572	If \a block is false, no such blocking will occur.
1573
1574	The return value is the previous value of signalsBlocked().
1575
1576	Note that the destroyed() signal will be emitted even if the signals
1577	for this object have been blocked.
1578
1579	Signals emitted while being blocked are not buffered.
1580
1581	\sa signalsBlocked(), QSignalBlocker
1582	*/
1583
1584	bool QObject::blockSignals(bool block) noexcept
1585	{
1586	Q_D(QObject);
1587	bool previous = d->blockSig;
1588	d->blockSig = block;
1589	return previous;
1590	}
1591
1592	/*!
1593	Returns the thread in which the object lives.
1594
1595	\sa moveToThread()
1596	*/
1597	QThread *QObject::thread() const
1598	{
1599	return d_func()->threadData.loadRelaxed()->thread.loadAcquire();
1600	}
1601
1602	/*!
1603	Changes the thread affinity for this object and its children and
1604	returns \c true on success. The object cannot be moved if it has a
1605	parent. Event processing will continue in the \a targetThread.
1606
1607	To move an object to the main thread, use QApplication::instance()
1608	to retrieve a pointer to the current application, and then use
1609	QApplication::thread() to retrieve the thread in which the
1610	application lives. For example:
1611
1612	\snippet code/src_corelib_kernel_qobject.cpp 7
1613
1614	If \a targetThread is \nullptr, all event processing for this object
1615	and its children stops, as they are no longer associated with any
1616	thread.
1617
1618	Note that all active timers for the object will be reset. The
1619	timers are first stopped in the current thread and restarted (with
1620	the same interval) in the \a targetThread. As a result, constantly
1621	moving an object between threads can postpone timer events
1622	indefinitely.
1623
1624	A QEvent::ThreadChange event is sent to this object just before
1625	the thread affinity is changed. You can handle this event to
1626	perform any special processing. Note that any new events that are
1627	posted to this object will be handled in the \a targetThread,
1628	provided it is not \nullptr: when it is \nullptr, no event processing
1629	for this object or its children can happen, as they are no longer
1630	associated with any thread.
1631
1632	\warning This function is \e not thread-safe; the current thread
1633	must be same as the current thread affinity. In other words, this
1634	function can only "push" an object from the current thread to
1635	another thread, it cannot "pull" an object from any arbitrary
1636	thread to the current thread. There is one exception to this rule
1637	however: objects with no thread affinity can be "pulled" to the
1638	current thread.
1639
1640	\sa thread()
1641	*/
1642	bool QObject::moveToThread(QThread *targetThread QT6_IMPL_NEW_OVERLOAD_TAIL)
1643	{
1644	Q_D(QObject);
1645
1646	if (d->threadData.loadRelaxed()->thread.loadAcquire() == targetThread) {
1647	// object is already in this thread
1648	return true;
1649	}
1650
1651	if (d->parent != nullptr) {
1652	qWarning(msg: "QObject::moveToThread: Cannot move objects with a parent");
1653	return false;
1654	}
1655	if (d->isWidget) {
1656	qWarning(msg: "QObject::moveToThread: Widgets cannot be moved to a new thread");
1657	return false;
1658	}
1659	if (!d->bindingStorage.isEmpty()) {
1660	qWarning(msg: "QObject::moveToThread: Can not move objects that contain bindings or are used in bindings to a new thread.");
1661	return false;
1662	}
1663
1664	QThreadData *currentData = QThreadData::current();
1665	QThreadData *targetData = targetThread ? QThreadData::get2(thread: targetThread) : nullptr;
1666	QThreadData *thisThreadData = d->threadData.loadAcquire();
1667	if (!thisThreadData->thread.loadRelaxed() && currentData == targetData) {
1668	// one exception to the rule: we allow moving objects with no thread affinity to the current thread
1669	currentData = thisThreadData;
1670	} else if (thisThreadData != currentData) {
1671	qWarning(msg: "QObject::moveToThread: Current thread (%p) is not the object's thread (%p).\n"
1672	"Cannot move to target thread (%p)\n",
1673	currentData->thread.loadRelaxed(), thisThreadData->thread.loadRelaxed(), targetData ? targetData->thread.loadRelaxed() : nullptr);
1674
1675	#ifdef Q_OS_DARWIN
1676	qWarning("You might be loading two sets of Qt binaries into the same process. "
1677	"Check that all plugins are compiled against the right Qt binaries. Export "
1678	"DYLD_PRINT_LIBRARIES=1 and check that only one set of binaries are being loaded.");
1679	#endif
1680
1681	return false;
1682	}
1683
1684	// prepare to move
1685	d->moveToThread_helper();
1686
1687	if (!targetData)
1688	targetData = new QThreadData(0);
1689
1690	// make sure nobody adds/removes connections to this object while we're moving it
1691	QMutexLocker l(signalSlotLock(o: this));
1692
1693	QOrderedMutexLocker locker(&currentData->postEventList.mutex,
1694	&targetData->postEventList.mutex);
1695
1696	// keep currentData alive (since we've got it locked)
1697	currentData->ref();
1698
1699	// move the object
1700	auto threadPrivate = targetThread
1701	? static_cast<QThreadPrivate *>(QThreadPrivate::get(o: targetThread))
1702	: nullptr;
1703	QBindingStatus *bindingStatus = threadPrivate
1704	? threadPrivate->bindingStatus()
1705	: nullptr;
1706	if (threadPrivate && !bindingStatus) {
1707	bindingStatus = threadPrivate->addObjectWithPendingBindingStatusChange(obj: this);
1708	}
1709	d_func()->setThreadData_helper(currentData, targetData, status: bindingStatus);
1710
1711	locker.unlock();
1712
1713	// now currentData can commit suicide if it wants to
1714	currentData->deref();
1715	return true;
1716	}
1717
1718	void QObjectPrivate::moveToThread_helper()
1719	{
1720	Q_Q(QObject);
1721	QEvent e(QEvent::ThreadChange);
1722	QCoreApplication::sendEvent(receiver: q, event: &e);
1723	bindingStorage.clear();
1724	for (int i = 0; i < children.size(); ++i) {
1725	QObject *child = children.at(i);
1726	child->d_func()->moveToThread_helper();
1727	}
1728	}
1729
1730	void QObjectPrivate::setThreadData_helper(QThreadData *currentData, QThreadData *targetData, QBindingStatus *status)
1731	{
1732	Q_Q(QObject);
1733
1734	if (status) {
1735	// the new thread is already running
1736	this->bindingStorage.bindingStatus = status;
1737	}
1738
1739	// move posted events
1740	qsizetype eventsMoved = 0;
1741	for (qsizetype i = 0; i < currentData->postEventList.size(); ++i) {
1742	const QPostEvent &pe = currentData->postEventList.at(i);
1743	if (!pe.event)
1744	continue;
1745	if (pe.receiver == q) {
1746	// move this post event to the targetList
1747	targetData->postEventList.addEvent(ev: pe);
1748	const_cast<QPostEvent &>(pe).event = nullptr;
1749	++eventsMoved;
1750	}
1751	}
1752	if (eventsMoved > 0 && targetData->hasEventDispatcher()) {
1753	targetData->canWait = false;
1754	targetData->eventDispatcher.loadRelaxed()->wakeUp();
1755	}
1756
1757	// the current emitting thread shouldn't restore currentSender after calling moveToThread()
1758	ConnectionData *cd = connections.loadAcquire();
1759	if (cd) {
1760	if (cd->currentSender) {
1761	cd->currentSender->receiverDeleted();
1762	cd->currentSender = nullptr;
1763	}
1764
1765	// adjust the receiverThreadId values in the Connections
1766	if (cd) {
1767	auto *c = cd->senders;
1768	while (c) {
1769	QObject *r = c->receiver.loadRelaxed();
1770	if (r) {
1771	Q_ASSERT(r == q);
1772	targetData->ref();
1773	QThreadData *old = c->receiverThreadData.loadRelaxed();
1774	if (old)
1775	old->deref();
1776	c->receiverThreadData.storeRelaxed(newValue: targetData);
1777	}
1778	c = c->next;
1779	}
1780	}
1781
1782	}
1783
1784	// set new thread data
1785	targetData->ref();
1786	threadData.loadRelaxed()->deref();
1787
1788	// synchronizes with loadAcquire e.g. in QCoreApplication::postEvent
1789	threadData.storeRelease(newValue: targetData);
1790
1791	for (int i = 0; i < children.size(); ++i) {
1792	QObject *child = children.at(i);
1793	child->d_func()->setThreadData_helper(currentData, targetData, status);
1794	}
1795	}
1796
1797	//
1798	// The timer flag hasTimer is set when startTimer is called.
1799	// It is not reset when killing the timer because more than
1800	// one timer might be active.
1801	//
1802
1803	/*!
1804	\fn int QObject::startTimer(int interval, Qt::TimerType timerType)
1805
1806	This is an overloaded function that will start a timer of type
1807	\a timerType and a timeout of \a interval milliseconds. This is
1808	equivalent to calling:
1809	\code
1810	startTimer(std::chrono::milliseconds{interval}, timerType);
1811	\endcode
1812
1813	\sa timerEvent(), killTimer(), QChronoTimer, QBasicTimer
1814	*/
1815
1816	int QObject::startTimer(int interval, Qt::TimerType timerType)
1817	{
1818	// no overflow can happen here:
1819	// 2^31 ms * 1,000,000 always fits a 64-bit signed integer type
1820	return startTimer(time: std::chrono::milliseconds{interval}, timerType);
1821	}
1822
1823	/*!
1824	\since 5.9
1825	\overload
1826
1827	Starts a timer and returns a timer identifier, or returns zero if
1828	it could not start a timer.
1829
1830	A timer event will occur every \a interval until killTimer()
1831	is called. If \a interval is equal to \c{std::chrono::duration::zero()},
1832	then the timer event occurs once every time there are no more window
1833	system events to process.
1834
1835	The virtual timerEvent() function is called with the QTimerEvent
1836	event parameter class when a timer event occurs. Reimplement this
1837	function to get timer events.
1838
1839	If multiple timers are running, the QTimerEvent::id() method can be
1840	used to find out which timer was activated.
1841
1842	Example:
1843
1844	\snippet code/src_corelib_kernel_qobject.cpp 8
1845
1846	Note that the accuracy of the timer depends on the underlying operating
1847	system and hardware.
1848
1849	The \a timerType argument allows you to customize the accuracy of
1850	the timer. See Qt::TimerType for information on the different timer types.
1851	Most platforms support an accuracy of 20 milliseconds; some provide more.
1852	If Qt is unable to deliver the requested number of timer events, it will
1853	silently discard some.
1854
1855	The QTimer and QChronoTimer classes provide a high-level programming
1856	interface with single-shot timers and timer signals instead of
1857	events. There is also a QBasicTimer class that is more lightweight than
1858	QChronoTimer but less clumsy than using timer IDs directly.
1859
1860	\note Starting from Qt 6.8 the type of \a interval
1861	is \c std::chrono::nanoseconds, prior to that it was \c
1862	std::chrono::milliseconds. This change is backwards compatible with
1863	older releases of Qt.
1864
1865	\note In Qt 6.8, QObject was changed to use Qt::TimerId to represent timer
1866	IDs. This method converts the TimerId to int for backwards compatibility
1867	reasons, however you can use Qt::TimerId to check the value returned by
1868	this method, for example:
1869	\snippet code/src_corelib_kernel_qobject.cpp invalid-timer-id
1870
1871	\sa timerEvent(), killTimer(), QChronoTimer, QBasicTimer
1872	*/
1873	int QObject::startTimer(std::chrono::nanoseconds interval, Qt::TimerType timerType)
1874	{
1875	Q_D(QObject);
1876
1877	using namespace std::chrono_literals;
1878
1879	if (Q_UNLIKELY(interval < 0ns)) {
1880	qWarning(msg: "QObject::startTimer: Timers cannot have negative intervals");
1881	return 0;
1882	}
1883
1884	auto thisThreadData = d->threadData.loadRelaxed();
1885	if (Q_UNLIKELY(!thisThreadData->hasEventDispatcher())) {
1886	qWarning(msg: "QObject::startTimer: Timers can only be used with threads started with QThread");
1887	return 0;
1888	}
1889	if (Q_UNLIKELY(thread() != QThread::currentThread())) {
1890	qWarning(msg: "QObject::startTimer: Timers cannot be started from another thread");
1891	return 0;
1892	}
1893
1894	auto dispatcher = thisThreadData->eventDispatcher.loadRelaxed();
1895	Qt::TimerId timerId = dispatcher->registerTimer(interval, timerType, object: this);
1896	d->ensureExtraData();
1897	d->extraData->runningTimers.append(t: timerId);
1898	return int(timerId);
1899	}
1900
1901	/*!
1902	Kills the timer with timer identifier, \a id.
1903
1904	The timer identifier is returned by startTimer() when a timer
1905	event is started.
1906
1907	\sa timerEvent(), startTimer()
1908	*/
1909
1910	void QObject::killTimer(int id)
1911	{
1912	killTimer(id: Qt::TimerId{id});
1913	}
1914
1915	/*!
1916	\since 6.8
1917	\overload
1918	*/
1919	void QObject::killTimer(Qt::TimerId id)
1920	{
1921	Q_D(QObject);
1922	if (Q_UNLIKELY(thread() != QThread::currentThread())) {
1923	qWarning(msg: "QObject::killTimer: Timers cannot be stopped from another thread");
1924	return;
1925	}
1926	if (id > Qt::TimerId::Invalid) {
1927	int at = d->extraData ? d->extraData->runningTimers.indexOf(t: id) : -1;
1928	if (at == -1) {
1929	// timer isn't owned by this object
1930	qWarning(msg: "QObject::killTimer(): Error: timer id %d is not valid for object %p (%s, %ls), timer has not been killed",
1931	qToUnderlying(e: id),
1932	this,
1933	metaObject()->className(),
1934	qUtf16Printable(objectName()));
1935	return;
1936	}
1937
1938	auto thisThreadData = d->threadData.loadRelaxed();
1939	if (thisThreadData->hasEventDispatcher())
1940	thisThreadData->eventDispatcher.loadRelaxed()->unregisterTimer(timerId: id);
1941
1942	d->extraData->runningTimers.remove(i: at);
1943	QAbstractEventDispatcherPrivate::releaseTimerId(id);
1944	}
1945	}
1946
1947	/*!
1948	\fn QObject *QObject::parent() const
1949
1950	Returns a pointer to the parent object.
1951
1952	\sa children()
1953	*/
1954
1955	/*!
1956	\fn const QObjectList &QObject::children() const
1957
1958	Returns a list of child objects.
1959	The QObjectList class is defined in the \c{<QObject>} header
1960	file as the following:
1961
1962	\quotefromfile kernel/qobject.h
1963	\skipto /typedef .*QObjectList/
1964	\printuntil QObjectList
1965
1966	The first child added is the \l{QList::first()}{first} object in
1967	the list and the last child added is the \l{QList::last()}{last}
1968	object in the list, i.e. new children are appended at the end.
1969
1970	Note that the list order changes when QWidget children are
1971	\l{QWidget::raise()}{raised} or \l{QWidget::lower()}{lowered}. A
1972	widget that is raised becomes the last object in the list, and a
1973	widget that is lowered becomes the first object in the list.
1974
1975	\sa findChild(), findChildren(), parent(), setParent()
1976	*/
1977
1978
1979	/*!
1980	\fn template<typename T> T *QObject::findChild(QAnyStringView name, Qt::FindChildOptions options) const
1981
1982	Returns the child of this object that can be cast into type T and
1983	that is called \a name, or \nullptr if there is no such object.
1984	A null \a name argument causes all objects to be matched. An empty,
1985	non-null \a name matches only objects whose \l objectName is empty.
1986	The search is performed recursively, unless \a options specifies the
1987	option FindDirectChildrenOnly.
1988
1989	If there is more than one child matching the search, the most-direct
1990	ancestor is returned. If there are several most-direct ancestors, the
1991	first child in children() will be returned. In that case, it's better
1992	to use findChildren() to get the complete list of all children.
1993
1994	This example returns a child \c{QPushButton} of \c{parentWidget}
1995	named \c{"button1"}, even if the button isn't a direct child of
1996	the parent:
1997
1998	\snippet code/src_corelib_kernel_qobject.cpp 10
1999
2000	This example returns a \c{QListWidget} child of \c{parentWidget}:
2001
2002	\snippet code/src_corelib_kernel_qobject.cpp 11
2003
2004	This example returns a child \c{QPushButton} of \c{parentWidget}
2005	(its direct parent) named \c{"button1"}:
2006
2007	\snippet code/src_corelib_kernel_qobject.cpp 41
2008
2009	This example returns a \c{QListWidget} child of \c{parentWidget},
2010	its direct parent:
2011
2012	\snippet code/src_corelib_kernel_qobject.cpp 42
2013
2014	\note In Qt versions prior to 6.7, this function took \a name as
2015	\c{QString}, not \c{QAnyStringView}.
2016
2017	\sa findChildren()
2018	*/
2019
2020	/*!
2021	\fn template<typename T> T *QObject::findChild(Qt::FindChildOptions options) const
2022	\overload
2023	\since 6.7
2024
2025	Returns the child of this object that can be cast into type T, or
2026	\nullptr if there is no such object.
2027	The search is performed recursively, unless \a options specifies the
2028	option FindDirectChildrenOnly.
2029
2030	If there is more than one child matching the search, the most-direct ancestor
2031	is returned. If there are several most-direct ancestors, the first child in
2032	children() will be returned. In that case, it's better to use findChildren()
2033	to get the complete list of all children.
2034
2035	\sa findChildren()
2036	*/
2037
2038	/*!
2039	\fn template<typename T> QList<T> QObject::findChildren(QAnyStringView name, Qt::FindChildOptions options) const
2040
2041	Returns all children of this object with the given \a name that can be
2042	cast to type T, or an empty list if there are no such objects.
2043	A null \a name argument causes all objects to be matched, an empty one
2044	only those whose objectName is empty.
2045	The search is performed recursively, unless \a options specifies the
2046	option FindDirectChildrenOnly.
2047
2048	The following example shows how to find a list of child \c{QWidget}s of
2049	the specified \c{parentWidget} named \c{widgetname}:
2050
2051	\snippet code/src_corelib_kernel_qobject.cpp 12
2052
2053	This example returns all \c{QPushButton}s that are children of \c{parentWidget}:
2054
2055	\snippet code/src_corelib_kernel_qobject.cpp 13
2056
2057	This example returns all \c{QPushButton}s that are immediate children of \c{parentWidget}:
2058
2059	\snippet code/src_corelib_kernel_qobject.cpp 43
2060
2061	\note In Qt versions prior to 6.7, this function took \a name as
2062	\c{QString}, not \c{QAnyStringView}.
2063
2064	\sa findChild()
2065	*/
2066
2067	/*!
2068	\fn template<typename T> QList<T> QObject::findChildren(Qt::FindChildOptions options) const
2069	\overload
2070	\since 6.3
2071
2072	Returns all children of this object that can be cast to type T, or
2073	an empty list if there are no such objects.
2074	The search is performed recursively, unless \a options specifies the
2075	option FindDirectChildrenOnly.
2076
2077	\sa findChild()
2078	*/
2079
2080	/*!
2081	\fn template<typename T> QList<T> QObject::findChildren(const QRegularExpression &re, Qt::FindChildOptions options) const
2082	\overload findChildren()
2083
2084	\since 5.0
2085
2086	Returns the children of this object that can be cast to type T
2087	and that have names matching the regular expression \a re,
2088	or an empty list if there are no such objects.
2089	The search is performed recursively, unless \a options specifies the
2090	option FindDirectChildrenOnly.
2091	*/
2092
2093	/*!
2094	\fn template<typename T> T qFindChild(const QObject *obj, const QString &name)
2095	\relates QObject
2096	\overload qFindChildren()
2097	\deprecated
2098
2099	This function is equivalent to
2100	\a{obj}->\l{QObject::findChild()}{findChild}<T>(\a name).
2101
2102	\note This function was provided as a workaround for MSVC 6
2103	which did not support member template functions. It is advised
2104	to use the other form in new code.
2105
2106	\sa QObject::findChild()
2107	*/
2108
2109	/*!
2110	\fn template<typename T> QList<T> qFindChildren(const QObject *obj, const QString &name)
2111	\relates QObject
2112	\overload qFindChildren()
2113	\deprecated
2114
2115	This function is equivalent to
2116	\a{obj}->\l{QObject::findChildren()}{findChildren}<T>(\a name).
2117
2118	\note This function was provided as a workaround for MSVC 6
2119	which did not support member template functions. It is advised
2120	to use the other form in new code.
2121
2122	\sa QObject::findChildren()
2123	*/
2124
2125	static bool matches_objectName_non_null(QObject *obj, QAnyStringView name)
2126	{
2127	if (auto ext = QObjectPrivate::get(o: obj)->extraData)
2128	return ext ->objectName.valueBypassingBindings() == name;
2129	return name.isEmpty();
2130	}
2131
2132	/*!
2133	\internal
2134	*/
2135	void qt_qFindChildren_helper(const QObject *parent, QAnyStringView name,
2136	const QMetaObject &mo, QList<void*> *list, Qt::FindChildOptions options)
2137	{
2138	Q_ASSERT(parent);
2139	Q_ASSERT(list);
2140	for (QObject *obj : parent->children()) {
2141	if (mo.cast(obj) && (name.isNull() || matches_objectName_non_null(obj, name)))
2142	list->append(t: obj);
2143	if (options & Qt::FindChildrenRecursively)
2144	qt_qFindChildren_helper(parent: obj, name, mo, list, options);
2145	}
2146	}
2147
2148	#if QT_CONFIG(regularexpression)
2149	/*!
2150	\internal
2151	*/
2152	void qt_qFindChildren_helper(const QObject *parent, const QRegularExpression &re,
2153	const QMetaObject &mo, QList<void*> *list, Qt::FindChildOptions options)
2154	{
2155	Q_ASSERT(parent);
2156	Q_ASSERT(list);
2157	for (QObject *obj : parent->children()) {
2158	if (mo.cast(obj)) {
2159	QRegularExpressionMatch m = re.match(subject: obj->objectName());
2160	if (m.hasMatch())
2161	list->append(t: obj);
2162	}
2163	if (options & Qt::FindChildrenRecursively)
2164	qt_qFindChildren_helper(parent: obj, re, mo, list, options);
2165	}
2166	}
2167	#endif // QT_CONFIG(regularexpression)
2168
2169	/*!
2170	\internal
2171	*/
2172	QObject *qt_qFindChild_helper(const QObject *parent, QAnyStringView name, const QMetaObject &mo, Qt::FindChildOptions options)
2173	{
2174	Q_ASSERT(parent);
2175	for (QObject *obj : parent->children()) {
2176	if (mo.cast(obj) && (name.isNull() || matches_objectName_non_null(obj, name)))
2177	return obj;
2178	}
2179	if (options & Qt::FindChildrenRecursively) {
2180	for (QObject *child : parent->children()) {
2181	if (QObject *obj = qt_qFindChild_helper(parent: child, name, mo, options))
2182	return obj;
2183	}
2184	}
2185	return nullptr;
2186	}
2187
2188	/*!
2189	Makes the object a child of \a parent.
2190
2191	\sa parent(), children()
2192	*/
2193	void QObject::setParent(QObject *parent)
2194	{
2195	Q_D(QObject);
2196	Q_ASSERT(!d->isWidget);
2197	d->setParent_helper(parent);
2198	}
2199
2200	void QObjectPrivate::deleteChildren()
2201	{
2202	Q_ASSERT_X(!isDeletingChildren, "QObjectPrivate::deleteChildren()", "isDeletingChildren already set, did this function recurse?");
2203	isDeletingChildren = true;
2204	// delete children objects
2205	// don't use qDeleteAll as the destructor of the child might
2206	// delete siblings
2207	for (int i = 0; i < children.size(); ++i) {
2208	currentChildBeingDeleted = children.at(i);
2209	children[i] = nullptr;
2210	delete currentChildBeingDeleted;
2211	}
2212	children.clear();
2213	currentChildBeingDeleted = nullptr;
2214	isDeletingChildren = false;
2215	}
2216
2217	void QObjectPrivate::setParent_helper(QObject *o)
2218	{
2219	Q_Q(QObject);
2220	Q_ASSERT_X(q != o, Q_FUNC_INFO, "Cannot parent a QObject to itself");
2221	#ifdef QT_DEBUG
2222	const auto checkForParentChildLoops = qScopeGuard(f: [&](){
2223	int depth = 0;
2224	auto p = parent;
2225	while (p) {
2226	if (++depth == CheckForParentChildLoopsWarnDepth) {
2227	qWarning(msg: "QObject %p (class: '%s', object name: '%s') may have a loop in its parent-child chain; "
2228	"this is undefined behavior",
2229	q, q->metaObject()->className(), qPrintable(q->objectName()));
2230	}
2231	p = p->parent();
2232	}
2233	});
2234	#endif
2235
2236	if (o == parent)
2237	return;
2238
2239	if (parent) {
2240	QObjectPrivate *parentD = parent->d_func();
2241	if (parentD->isDeletingChildren && wasDeleted
2242	&& parentD->currentChildBeingDeleted == q) {
2243	// don't do anything since QObjectPrivate::deleteChildren() already
2244	// cleared our entry in parentD->children.
2245	} else {
2246	const int index = parentD->children.indexOf(t: q);
2247	if (index < 0) {
2248	// we're probably recursing into setParent() from a ChildRemoved event, don't do anything
2249	} else if (parentD->isDeletingChildren) {
2250	parentD->children[index] = nullptr;
2251	} else {
2252	parentD->children.removeAt(i: index);
2253	if (sendChildEvents && parentD->receiveChildEvents) {
2254	QChildEvent e(QEvent::ChildRemoved, q);
2255	QCoreApplication::sendEvent(receiver: parent, event: &e);
2256	}
2257	}
2258	}
2259	}
2260
2261	if (receiveParentEvents) {
2262	Q_ASSERT(!isWidget); // Handled in QWidget
2263	QEvent e(QEvent::ParentAboutToChange);
2264	QCoreApplication::sendEvent(receiver: q, event: &e);
2265	}
2266
2267	parent = o;
2268
2269	if (parent) {
2270	// object hierarchies are constrained to a single thread
2271	if (threadData.loadRelaxed() != parent->d_func()->threadData.loadRelaxed()) {
2272	qWarning(msg: "QObject::setParent: Cannot set parent, new parent is in a different thread");
2273	parent = nullptr;
2274	return;
2275	}
2276	parent->d_func()->children.append(t: q);
2277	if (sendChildEvents && parent->d_func()->receiveChildEvents) {
2278	if (!isWidget) {
2279	QChildEvent e(QEvent::ChildAdded, q);
2280	QCoreApplication::sendEvent(receiver: parent, event: &e);
2281	}
2282	}
2283	}
2284
2285	if (receiveParentEvents) {
2286	Q_ASSERT(!isWidget); // Handled in QWidget
2287	QEvent e(QEvent::ParentChange);
2288	QCoreApplication::sendEvent(receiver: q, event: &e);
2289	}
2290	}
2291
2292	/*!
2293	\fn void QObject::installEventFilter(QObject *filterObj)
2294
2295	Installs an event filter \a filterObj on this object. For example:
2296	\snippet code/src_corelib_kernel_qobject.cpp 14
2297
2298	An event filter is an object that receives all events that are
2299	sent to this object. The filter can either stop the event or
2300	forward it to this object. The event filter \a filterObj receives
2301	events via its eventFilter() function. The eventFilter() function
2302	must return true if the event should be filtered, (i.e. stopped);
2303	otherwise it must return false.
2304
2305	If multiple event filters are installed on a single object, the
2306	filter that was installed last is activated first.
2307
2308	If \a filterObj has already been installed for this object,
2309	this function moves it so it acts as if it was installed last.
2310
2311	Here's a \c KeyPressEater class that eats the key presses of its
2312	monitored objects:
2313
2314	\snippet code/src_corelib_kernel_qobject.cpp 15
2315
2316	And here's how to install it on two widgets:
2317
2318	\snippet code/src_corelib_kernel_qobject.cpp 16
2319
2320	The QShortcut class, for example, uses this technique to intercept
2321	shortcut key presses.
2322
2323	\warning If you delete the receiver object in your eventFilter()
2324	function, be sure to return true. If you return false, Qt sends
2325	the event to the deleted object and the program will crash.
2326
2327	Note that the filtering object must be in the same thread as this
2328	object. If \a filterObj is in a different thread, this function does
2329	nothing. If either \a filterObj or this object are moved to a different
2330	thread after calling this function, the event filter will not be
2331	called until both objects have the same thread affinity again (it
2332	is \e not removed).
2333
2334	\sa removeEventFilter(), eventFilter(), event()
2335	*/
2336
2337	void QObject::installEventFilter(QObject *obj)
2338	{
2339	Q_D(QObject);
2340	if (!obj)
2341	return;
2342	if (d->threadData.loadRelaxed() != obj->d_func()->threadData.loadRelaxed()) {
2343	qWarning(msg: "QObject::installEventFilter(): Cannot filter events for objects in a different thread.");
2344	return;
2345	}
2346
2347	d->ensureExtraData();
2348
2349	// clean up unused items in the list along the way:
2350	auto isNullOrEquals = [](auto obj) { return [obj](const auto &p) { return !p || p == obj; }; };
2351	d->extraData->eventFilters.removeIf(pred: isNullOrEquals(obj));
2352	d->extraData->eventFilters.prepend(t: obj);
2353	}
2354
2355	/*!
2356	Removes an event filter object \a obj from this object. The
2357	request is ignored if such an event filter has not been installed.
2358
2359	All event filters for this object are automatically removed when
2360	this object is destroyed.
2361
2362	It is always safe to remove an event filter, even during event
2363	filter activation (i.e. from the eventFilter() function).
2364
2365	\sa installEventFilter(), eventFilter(), event()
2366	*/
2367
2368	void QObject::removeEventFilter(QObject *obj)
2369	{
2370	Q_D(QObject);
2371	if (d->extraData) {
2372	for (auto &filter : d->extraData->eventFilters) {
2373	if (filter == obj) {
2374	filter = nullptr;
2375	break;
2376	}
2377	}
2378	}
2379	}
2380
2381	/*!
2382	\fn void QObject::destroyed(QObject *obj)
2383
2384	This signal is emitted immediately before the object \a obj is
2385	destroyed, after any instances of QPointer have been notified,
2386	and cannot be blocked.
2387
2388	All the objects's children are destroyed immediately after this
2389	signal is emitted.
2390
2391	\sa deleteLater(), QPointer
2392	*/
2393
2394	/*!
2395	\threadsafe
2396
2397	Schedules this object for deletion.
2398
2399	The object will be deleted when control returns to the event
2400	loop. If the event loop is not running when this function is
2401	called (e.g. deleteLater() is called on an object before
2402	QCoreApplication::exec()), the object will be deleted once the
2403	event loop is started. If deleteLater() is called after the main event loop
2404	has stopped, the object will not be deleted.
2405	If deleteLater() is called on an object that lives in a
2406	thread with no running event loop, the object will be destroyed when the
2407	thread finishes.
2408
2409	Note that entering and leaving a new event loop (e.g., by opening a modal
2410	dialog) will \e not perform the deferred deletion; for the object to be
2411	deleted, the control must return to the event loop from which deleteLater()
2412	was called. This does not apply to objects deleted while a previous, nested
2413	event loop was still running: the Qt event loop will delete those objects
2414	as soon as the new nested event loop starts.
2415
2416	In situations where Qt is not driving the event dispatcher via e.g.
2417	QCoreApplication::exec() or QEventLoop::exec(), deferred deletes
2418	will not be processed automatically. To ensure deferred deletion in
2419	this scenario, the following workaround can be used:
2420
2421	\code
2422	const auto *eventDispatcher = QThread::currentThread()->eventDispatcher();
2423	QObject::connect(eventDispatcher, &QAbstractEventDispatcher::aboutToBlock,
2424	QThread::currentThread(), []{
2425	if (QThread::currentThread()->loopLevel() == 0)
2426	QCoreApplication::sendPostedEvents(nullptr, QEvent::DeferredDelete);
2427	}
2428	);
2429	\endcode
2430
2431	\sa destroyed(), QPointer
2432	*/
2433	void QObject::deleteLater()
2434	{
2435	#ifdef QT_DEBUG
2436	if (qApp == this)
2437	qWarning(msg: "You are deferring the delete of QCoreApplication, this may not work as expected.");
2438	#endif
2439
2440
2441	// De-bounce QDeferredDeleteEvents. Use the post event list mutex
2442	// to guard access to deleteLaterCalled, so we don't need a separate
2443	// mutex in QObjectData.
2444	auto eventListLocker = QCoreApplicationPrivate::lockThreadPostEventList(object: this);
2445	if (!eventListLocker.threadData)
2446	return;
2447
2448	// FIXME: The deleteLaterCalled flag is part of a bit field,
2449	// so we likely have data races here, even with the mutex above,
2450	// as long as we're not guarding every access to the bit field.
2451
2452	Q_D(QObject);
2453	if (d->deleteLaterCalled)
2454	return;
2455
2456	d->deleteLaterCalled = true;
2457
2458	int loopLevel = 0;
2459	int scopeLevel = 0;
2460
2461	auto *objectThreadData = eventListLocker.threadData;
2462	if (objectThreadData == QThreadData::current()) {
2463	// Remember the current running eventloop for deleteLater
2464	// calls in the object's own thread.
2465
2466	// Events sent by non-Qt event handlers (such as glib) may not
2467	// have the scopeLevel set correctly. The scope level makes sure that
2468	// code like this:
2469	// foo->deleteLater();
2470	// qApp->processEvents(); // without passing QEvent::DeferredDelete
2471	// will not cause "foo" to be deleted before returning to the event loop.
2472
2473	loopLevel = objectThreadData->loopLevel;
2474	scopeLevel = objectThreadData->scopeLevel;
2475
2476	// If the scope level is 0 while loopLevel != 0, we are called from a
2477	// non-conformant code path, and our best guess is that the scope level
2478	// should be 1. (Loop level 0 is special: it means that no event loops
2479	// are running.)
2480	if (scopeLevel == 0 && loopLevel != 0)
2481	scopeLevel = 1;
2482	}
2483
2484	eventListLocker.unlock();
2485	QCoreApplication::postEvent(receiver: this,
2486	event: new QDeferredDeleteEvent(loopLevel, scopeLevel));
2487	}
2488
2489	/*!
2490	\fn QString QObject::tr(const char *sourceText, const char *disambiguation, int n)
2491	\reentrant
2492
2493	Returns a translated version of \a sourceText, optionally based on a
2494	\a disambiguation string and value of \a n for strings containing plurals;
2495	otherwise returns QString::fromUtf8(\a sourceText) if no appropriate
2496	translated string is available.
2497
2498	Example:
2499	\snippet ../widgets/itemviews/spreadsheet/spreadsheet.cpp implicit tr context
2500	\dots
2501
2502	If the same \a sourceText is used in different roles within the
2503	same context, an additional identifying string may be passed in
2504	\a disambiguation (\nullptr by default).
2505
2506	Example:
2507
2508	\snippet code/src_corelib_kernel_qobject.cpp 17
2509	\dots
2510
2511	See \l{Writing Source Code for Translation} for a detailed description of
2512	Qt's translation mechanisms in general, and the
2513	\l{Writing Source Code for Translation#Disambiguate Identical Text}
2514	{Disambiguate Identical Text} section for information on disambiguation.
2515
2516	\warning This method is reentrant only if all translators are
2517	installed \e before calling this method. Installing or removing
2518	translators while performing translations is not supported. Doing
2519	so will probably result in crashes or other undesirable behavior.
2520
2521	\sa QCoreApplication::translate(), {Internationalization with Qt}
2522	*/
2523
2524	/*****************************************************************************
2525	Signals and slots
2526	*****************************************************************************/
2527
2528	namespace {
2529	// This class provides (per-thread) storage for qFlagLocation()
2530	class FlaggedDebugSignatures
2531	{
2532	uint idx = 0;
2533	std::array<const char *, 2> locations = {}; // one for the SIGNAL, one for the SLOT
2534
2535	public:
2536	void store(const char* method) noexcept
2537	{ locations[idx++ % locations.size()] = method; }
2538
2539	bool contains(const char *method) const noexcept
2540	{ return std::find(first: locations.begin(), last: locations.end(), val: method) != locations.end(); }
2541	};
2542
2543	Q_CONSTINIT static thread_local FlaggedDebugSignatures flaggedSignatures = {};
2544	} // unnamed namespace
2545
2546	const char *qFlagLocation(const char *method)
2547	{
2548	flaggedSignatures.store(method);
2549	return method;
2550	}
2551
2552	static int extract_code(const char *member)
2553	{
2554	// extract code, ensure QMETHOD_CODE <= code <= QSIGNAL_CODE
2555	return (((int)(*member) - '0') & 0x3);
2556	}
2557
2558	static const char *extract_location(const char *member)
2559	{
2560	if (flaggedSignatures.contains(method: member)) {
2561	// signature includes location information after the first null-terminator
2562	const char *location = member + qstrlen(str: member) + 1;
2563	if (*location != '\0')
2564	return location;
2565	}
2566	return nullptr;
2567	}
2568
2569	static bool check_signal_macro(const QObject *sender, const char *signal,
2570	const char *func, const char *op)
2571	{
2572	int sigcode = extract_code(member: signal);
2573	if (sigcode != QSIGNAL_CODE) {
2574	if (sigcode == QSLOT_CODE)
2575	qCWarning(lcConnect, "QObject::%s: Attempt to %s non-signal %s::%s", func, op,
2576	sender->metaObject()->className(), signal + 1);
2577	else
2578	qCWarning(lcConnect, "QObject::%s: Use the SIGNAL macro to %s %s::%s", func, op,
2579	sender->metaObject()->className(), signal);
2580	return false;
2581	}
2582	return true;
2583	}
2584
2585	static bool check_method_code(int code, const QObject *object, const char *method, const char *func)
2586	{
2587	if (code != QSLOT_CODE && code != QSIGNAL_CODE) {
2588	qCWarning(lcConnect,
2589	"QObject::%s: Use the SLOT or SIGNAL macro to "
2590	"%s %s::%s",
2591	func, func, object->metaObject()->className(), method);
2592	return false;
2593	}
2594	return true;
2595	}
2596
2597	Q_DECL_COLD_FUNCTION
2598	static void err_method_notfound(const QObject *object,
2599	const char *method, const char *func)
2600	{
2601	const char *type = "method";
2602	switch (extract_code(member: method)) {
2603	case QSLOT_CODE: type = "slot"; break;
2604	case QSIGNAL_CODE: type = "signal"; break;
2605	}
2606	const char *loc = extract_location(member: method);
2607	if (strchr(s: method, c: ')') == nullptr) // common typing mistake
2608	qCWarning(lcConnect, "QObject::%s: Parentheses expected, %s %s::%s%s%s", func, type,
2609	object->metaObject()->className(), method + 1, loc ? " in " : "", loc ? loc : "");
2610	else
2611	qCWarning(lcConnect, "QObject::%s: No such %s %s::%s%s%s", func, type,
2612	object->metaObject()->className(), method + 1, loc ? " in " : "", loc ? loc : "");
2613	}
2614
2615	Q_DECL_COLD_FUNCTION
2616	static void err_info_about_objects(const char *func, const QObject *sender, const QObject *receiver)
2617	{
2618	QString a = sender ? sender->objectName() : QString();
2619	QString b = receiver ? receiver->objectName() : QString();
2620	if (!a.isEmpty())
2621	qCWarning(lcConnect, "QObject::%s: (sender name: '%s')", func, a.toLocal8Bit().data());
2622	if (!b.isEmpty())
2623	qCWarning(lcConnect, "QObject::%s: (receiver name: '%s')", func, b.toLocal8Bit().data());
2624	}
2625
2626	/*!
2627	Returns a pointer to the object that sent the signal, if called in
2628	a slot activated by a signal; otherwise it returns \nullptr. The pointer
2629	is valid only during the execution of the slot that calls this
2630	function from this object's thread context.
2631
2632	The pointer returned by this function becomes invalid if the
2633	sender is destroyed, or if the slot is disconnected from the
2634	sender's signal.
2635
2636	\warning This function violates the object-oriented principle of
2637	modularity. However, getting access to the sender might be useful
2638	when many signals are connected to a single slot.
2639
2640	\warning As mentioned above, the return value of this function is
2641	not valid when the slot is called via a Qt::DirectConnection from
2642	a thread different from this object's thread. Do not use this
2643	function in this type of scenario.
2644
2645	\sa senderSignalIndex()
2646	*/
2647
2648	QObject *QObject::sender() const
2649	{
2650	Q_D(const QObject);
2651
2652	QMutexLocker locker(signalSlotLock(o: this));
2653	QObjectPrivate::ConnectionData *cd = d->connections.loadRelaxed();
2654	if (!cd || !cd->currentSender)
2655	return nullptr;
2656
2657	for (QObjectPrivate::Connection *c = cd->senders; c; c = c->next) {
2658	if (c->sender == cd->currentSender->sender)
2659	return cd->currentSender->sender;
2660	}
2661
2662	return nullptr;
2663	}
2664
2665	/*!
2666	\since 4.8
2667
2668	Returns the meta-method index of the signal that called the currently
2669	executing slot, which is a member of the class returned by sender().
2670	If called outside of a slot activated by a signal, -1 is returned.
2671
2672	For signals with default parameters, this function will always return
2673	the index with all parameters, regardless of which was used with
2674	connect(). For example, the signal \c {destroyed(QObject *obj = \nullptr)}
2675	will have two different indexes (with and without the parameter), but
2676	this function will always return the index with a parameter. This does
2677	not apply when overloading signals with different parameters.
2678
2679	\warning This function violates the object-oriented principle of
2680	modularity. However, getting access to the signal index might be useful
2681	when many signals are connected to a single slot.
2682
2683	\warning The return value of this function is not valid when the slot
2684	is called via a Qt::DirectConnection from a thread different from this
2685	object's thread. Do not use this function in this type of scenario.
2686
2687	\sa sender(), QMetaObject::indexOfSignal(), QMetaObject::method()
2688	*/
2689
2690	int QObject::senderSignalIndex() const
2691	{
2692	Q_D(const QObject);
2693
2694	QMutexLocker locker(signalSlotLock(o: this));
2695	QObjectPrivate::ConnectionData *cd = d->connections.loadRelaxed();
2696	if (!cd || !cd->currentSender)
2697	return -1;
2698
2699	for (QObjectPrivate::Connection *c = cd->senders; c; c = c->next) {
2700	if (c->sender == cd->currentSender->sender) {
2701	// Convert from signal range to method range
2702	return QMetaObjectPrivate::signal(m: c->sender->metaObject(), signal_index: cd->currentSender->signal).methodIndex();
2703	}
2704	}
2705
2706	return -1;
2707	}
2708
2709	/*!
2710	Returns the number of receivers connected to the \a signal.
2711
2712	Since both slots and signals can be used as receivers for signals,
2713	and the same connections can be made many times, the number of
2714	receivers is the same as the number of connections made from this
2715	signal.
2716
2717	When calling this function, you can use the \c SIGNAL() macro to
2718	pass a specific signal:
2719
2720	\snippet code/src_corelib_kernel_qobject.cpp 21
2721
2722	As the code snippet above illustrates, you can use this function to avoid
2723	expensive operations or emitting a signal that nobody listens to.
2724
2725	\warning In a multithreaded application, consecutive calls to this
2726	function are not guaranteed to yield the same results.
2727
2728	\warning This function violates the object-oriented principle of
2729	modularity. In particular, this function must not be called from an
2730	override of connectNotify() or disconnectNotify(), as those might get
2731	called from any thread.
2732
2733	\sa isSignalConnected()
2734	*/
2735
2736	int QObject::receivers(const char *signal) const
2737	{
2738	Q_D(const QObject);
2739	int receivers = 0;
2740	if (signal) {
2741	QByteArray signal_name = QMetaObject::normalizedSignature(method: signal);
2742	signal = signal_name;
2743	#ifndef QT_NO_DEBUG
2744	if (!check_signal_macro(sender: this, signal, func: "receivers", op: "bind"))
2745	return 0;
2746	#endif
2747	signal++; // skip code
2748	int signal_index = d->signalIndex(signalName: signal);
2749	if (signal_index < 0) {
2750	#ifndef QT_NO_DEBUG
2751	err_method_notfound(object: this, method: signal - 1, func: "receivers");
2752	#endif
2753	return 0;
2754	}
2755
2756	if (!d->isSignalConnected(signalIndex: signal_index))
2757	return receivers;
2758
2759	if (!d->isDeletingChildren && d->declarativeData && QAbstractDeclarativeData::receivers) {
2760	receivers += QAbstractDeclarativeData::receivers(d->declarativeData, this,
2761	signal_index);
2762	}
2763
2764	QMutexLocker locker(signalSlotLock(o: this));
2765	QObjectPrivate::ConnectionData *cd = d->connections.loadRelaxed();
2766	if (cd && signal_index < cd->signalVectorCount()) {
2767	const QObjectPrivate::Connection *c = cd->signalVector.loadRelaxed()->at(i: signal_index).first.loadRelaxed();
2768	while (c) {
2769	receivers += c->receiver.loadRelaxed() ? 1 : 0;
2770	c = c->nextConnectionList.loadRelaxed();
2771	}
2772	}
2773	}
2774	return receivers;
2775	}
2776
2777	/*!
2778	\since 5.0
2779	Returns \c true if the \a signal is connected to at least one receiver,
2780	otherwise returns \c false.
2781
2782	\a signal must be a signal member of this object, otherwise the behaviour
2783	is undefined.
2784
2785	\snippet code/src_corelib_kernel_qobject.cpp 49
2786
2787	As the code snippet above illustrates, you can use this function to avoid
2788	expensive operations or emitting a signal that nobody listens to.
2789
2790	\warning In a multithreaded application, consecutive calls to this
2791	function are not guaranteed to yield the same results.
2792
2793	\warning This function violates the object-oriented principle of
2794	modularity. In particular, this function must not be called from an
2795	override of connectNotify() or disconnectNotify(), as those might get
2796	called from any thread.
2797
2798	\sa receivers()
2799	*/
2800	bool QObject::isSignalConnected(const QMetaMethod &signal) const
2801	{
2802	Q_D(const QObject);
2803	if (!signal.mobj)
2804	return false;
2805
2806	Q_ASSERT_X(signal.mobj->cast(this) && signal.methodType() == QMetaMethod::Signal,
2807	"QObject::isSignalConnected" , "the parameter must be a signal member of the object");
2808	uint signalIndex = signal.relativeMethodIndex();
2809
2810	if (signal.data.flags() & MethodCloned)
2811	signalIndex = QMetaObjectPrivate::originalClone(obj: signal.mobj, local_method_index: signalIndex);
2812
2813	signalIndex += QMetaObjectPrivate::signalOffset(m: signal.mobj);
2814
2815	QMutexLocker locker(signalSlotLock(o: this));
2816	return d->isSignalConnected(signalIndex, checkDeclarative: true);
2817	}
2818
2819	/*!
2820	\internal
2821
2822	This helper function calculates signal and method index for the given
2823	member in the specified class.
2824
2825	\list
2826	\li If member.mobj is \nullptr then both signalIndex and methodIndex are set to -1.
2827
2828	\li If specified member is not a member of obj instance class (or one of
2829	its parent classes) then both signalIndex and methodIndex are set to -1.
2830	\endlist
2831
2832	This function is used by QObject::connect and QObject::disconnect which
2833	are working with QMetaMethod.
2834
2835	\a signalIndex is set to the signal index of member. If the member
2836	specified is not signal this variable is set to -1.
2837
2838	\a methodIndex is set to the method index of the member. If the
2839	member is not a method of the object specified by the \a obj argument this
2840	variable is set to -1.
2841	*/
2842	void QMetaObjectPrivate::memberIndexes(const QObject *obj,
2843	const QMetaMethod &member,
2844	int *signalIndex, int *methodIndex)
2845	{
2846	*signalIndex = -1;
2847	*methodIndex = -1;
2848	if (!obj || !member.mobj)
2849	return;
2850	const QMetaObject *m = obj->metaObject();
2851	// Check that member is member of obj class
2852	while (m != nullptr && m != member.mobj)
2853	m = m->d.superdata;
2854	if (!m)
2855	return;
2856	*signalIndex = *methodIndex = member.relativeMethodIndex();
2857
2858	int signalOffset;
2859	int methodOffset;
2860	computeOffsets(metaobject: m, signalOffset: &signalOffset, methodOffset: &methodOffset);
2861
2862	*methodIndex += methodOffset;
2863	if (member.methodType() == QMetaMethod::Signal) {
2864	*signalIndex = originalClone(obj: m, local_method_index: *signalIndex);
2865	*signalIndex += signalOffset;
2866	} else {
2867	*signalIndex = -1;
2868	}
2869	}
2870
2871	#ifndef QT_NO_DEBUG
2872	static inline void check_and_warn_compat(const QMetaObject *sender, const QMetaMethod &signal,
2873	const QMetaObject *receiver, const QMetaMethod &method)
2874	{
2875	if (signal.attributes() & QMetaMethod::Compatibility) {
2876	if (!(method.attributes() & QMetaMethod::Compatibility))
2877	qCWarning(lcConnect, "QObject::connect: Connecting from COMPAT signal (%s::%s)",
2878	sender->className(), signal.methodSignature().constData());
2879	} else if ((method.attributes() & QMetaMethod::Compatibility)
2880	&& method.methodType() == QMetaMethod::Signal) {
2881	qCWarning(lcConnect, "QObject::connect: Connecting from %s::%s to COMPAT slot (%s::%s)",
2882	sender->className(), signal.methodSignature().constData(), receiver->className(),
2883	method.methodSignature().constData());
2884	}
2885	}
2886	#endif
2887
2888	/*!
2889	\threadsafe
2890
2891	Creates a connection of the given \a type from the \a signal in
2892	the \a sender object to the \a method in the \a receiver object.
2893	Returns a handle to the connection that can be used to disconnect
2894	it later.
2895
2896	You must use the \c SIGNAL() and \c SLOT() macros when specifying
2897	the \a signal and the \a method, for example:
2898
2899	\snippet code/src_corelib_kernel_qobject.cpp 22
2900
2901	This example ensures that the label always displays the current
2902	scroll bar value. Note that the signal and slots parameters must not
2903	contain any variable names, only the type. E.g. the following would
2904	not work and return false:
2905
2906	\snippet code/src_corelib_kernel_qobject.cpp 23
2907
2908	A signal can also be connected to another signal:
2909
2910	\snippet code/src_corelib_kernel_qobject.cpp 24
2911
2912	In this example, the \c MyWidget constructor relays a signal from
2913	a private member variable, and makes it available under a name
2914	that relates to \c MyWidget.
2915
2916	A signal can be connected to many slots and signals. Many signals
2917	can be connected to one slot.
2918
2919	If a signal is connected to several slots, the slots are activated
2920	in the same order in which the connections were made, when the
2921	signal is emitted.
2922
2923	The function returns a QMetaObject::Connection that represents
2924	a handle to a connection if it successfully
2925	connects the signal to the slot. The connection handle will be invalid
2926	if it cannot create the connection, for example, if QObject is unable
2927	to verify the existence of either \a signal or \a method, or if their
2928	signatures aren't compatible.
2929	You can check if the handle is valid by casting it to a bool.
2930
2931	By default, a signal is emitted for every connection you make;
2932	two signals are emitted for duplicate connections. You can break
2933	all of these connections with a single disconnect() call.
2934	If you pass the Qt::UniqueConnection \a type, the connection will only
2935	be made if it is not a duplicate. If there is already a duplicate
2936	(exact same signal to the exact same slot on the same objects),
2937	the connection will fail and connect will return an invalid QMetaObject::Connection.
2938
2939	\note Qt::UniqueConnections do not work for lambdas, non-member functions
2940	and functors; they only apply to connecting to member functions.
2941
2942	The optional \a type parameter describes the type of connection
2943	to establish. In particular, it determines whether a particular
2944	signal is delivered to a slot immediately or queued for delivery
2945	at a later time. If the signal is queued, the parameters must be
2946	of types that are known to Qt's meta-object system, because Qt
2947	needs to copy the arguments to store them in an event behind the
2948	scenes. If you try to use a queued connection and get the error
2949	message
2950
2951	\snippet code/src_corelib_kernel_qobject.cpp 25
2952
2953	call qRegisterMetaType() to register the data type before you
2954	establish the connection.
2955
2956	\sa disconnect(), sender(), qRegisterMetaType(), Q_DECLARE_METATYPE(),
2957	{Differences between String-Based and Functor-Based Connections}
2958	*/
2959	QMetaObject::Connection QObject::connect(const QObject *sender, const char *signal,
2960	const QObject *receiver, const char *method,
2961	Qt::ConnectionType type)
2962	{
2963	if (sender == nullptr || receiver == nullptr || signal == nullptr || method == nullptr) {
2964	qCWarning(lcConnect, "QObject::connect: Cannot connect %s::%s to %s::%s",
2965	sender ? sender->metaObject()->className() : "(nullptr)",
2966	(signal && *signal) ? signal + 1 : "(nullptr)",
2967	receiver ? receiver->metaObject()->className() : "(nullptr)",
2968	(method && *method) ? method + 1 : "(nullptr)");
2969	return QMetaObject::Connection(nullptr);
2970	}
2971	QByteArray tmp_signal_name;
2972
2973	if (!check_signal_macro(sender, signal, func: "connect", op: "bind"))
2974	return QMetaObject::Connection(nullptr);
2975	const QMetaObject *smeta = sender->metaObject();
2976	const char *signal_arg = signal;
2977	++signal; // skip code
2978	QArgumentTypeArray signalTypes;
2979	Q_ASSERT(QMetaObjectPrivate::get(smeta)->revision >= 7);
2980	QByteArray signalName = QMetaObjectPrivate::decodeMethodSignature(signature: signal, types&: signalTypes);
2981	int signal_index = QMetaObjectPrivate::indexOfSignalRelative(
2982	baseObject: &smeta, name: signalName, argc: signalTypes.size(), types: signalTypes.constData());
2983	if (signal_index < 0) {
2984	// check for normalized signatures
2985	tmp_signal_name = QMetaObject::normalizedSignature(method: signal - 1);
2986	signal = tmp_signal_name.constData() + 1;
2987
2988	signalTypes.clear();
2989	signalName = QMetaObjectPrivate::decodeMethodSignature(signature: signal, types&: signalTypes);
2990	smeta = sender->metaObject();
2991	signal_index = QMetaObjectPrivate::indexOfSignalRelative(
2992	baseObject: &smeta, name: signalName, argc: signalTypes.size(), types: signalTypes.constData());
2993	}
2994	if (signal_index < 0) {
2995	err_method_notfound(object: sender, method: signal_arg, func: "connect");
2996	err_info_about_objects(func: "connect", sender, receiver);
2997	return QMetaObject::Connection(nullptr);
2998	}
2999	signal_index = QMetaObjectPrivate::originalClone(obj: smeta, local_method_index: signal_index);
3000	signal_index += QMetaObjectPrivate::signalOffset(m: smeta);
3001
3002	QByteArray tmp_method_name;
3003	int membcode = extract_code(member: method);
3004
3005	if (!check_method_code(code: membcode, object: receiver, method, func: "connect"))
3006	return QMetaObject::Connection(nullptr);
3007	const char *method_arg = method;
3008	++method; // skip code
3009
3010	QArgumentTypeArray methodTypes;
3011	QByteArray methodName = QMetaObjectPrivate::decodeMethodSignature(signature: method, types&: methodTypes);
3012	const QMetaObject *rmeta = receiver->metaObject();
3013	int method_index_relative = -1;
3014	Q_ASSERT(QMetaObjectPrivate::get(rmeta)->revision >= 7);
3015	switch (membcode) {
3016	case QSLOT_CODE:
3017	method_index_relative = QMetaObjectPrivate::indexOfSlotRelative(
3018	m: &rmeta, name: methodName, argc: methodTypes.size(), types: methodTypes.constData());
3019	break;
3020	case QSIGNAL_CODE:
3021	method_index_relative = QMetaObjectPrivate::indexOfSignalRelative(
3022	baseObject: &rmeta, name: methodName, argc: methodTypes.size(), types: methodTypes.constData());
3023	break;
3024	}
3025	if (method_index_relative < 0) {
3026	// check for normalized methods
3027	tmp_method_name = QMetaObject::normalizedSignature(method);
3028	method = tmp_method_name.constData();
3029
3030	methodTypes.clear();
3031	methodName = QMetaObjectPrivate::decodeMethodSignature(signature: method, types&: methodTypes);
3032	// rmeta may have been modified above
3033	rmeta = receiver->metaObject();
3034	switch (membcode) {
3035	case QSLOT_CODE:
3036	method_index_relative = QMetaObjectPrivate::indexOfSlotRelative(
3037	m: &rmeta, name: methodName, argc: methodTypes.size(), types: methodTypes.constData());
3038	break;
3039	case QSIGNAL_CODE:
3040	method_index_relative = QMetaObjectPrivate::indexOfSignalRelative(
3041	baseObject: &rmeta, name: methodName, argc: methodTypes.size(), types: methodTypes.constData());
3042	break;
3043	}
3044	}
3045
3046	if (method_index_relative < 0) {
3047	err_method_notfound(object: receiver, method: method_arg, func: "connect");
3048	err_info_about_objects(func: "connect", sender, receiver);
3049	return QMetaObject::Connection(nullptr);
3050	}
3051
3052	if (!QMetaObjectPrivate::checkConnectArgs(signalArgc: signalTypes.size(), signalTypes: signalTypes.constData(),
3053	methodArgc: methodTypes.size(), methodTypes: methodTypes.constData())) {
3054	qCWarning(lcConnect,
3055	"QObject::connect: Incompatible sender/receiver arguments"
3056	"\n %s::%s --> %s::%s",
3057	sender->metaObject()->className(), signal, receiver->metaObject()->className(),
3058	method);
3059	return QMetaObject::Connection(nullptr);
3060	}
3061
3062	int *types = nullptr;
3063	if ((type == Qt::QueuedConnection)
3064	&& !(types = queuedConnectionTypes(argumentTypes: signalTypes.constData(), argc: signalTypes.size()))) {
3065	return QMetaObject::Connection(nullptr);
3066	}
3067
3068	#ifndef QT_NO_DEBUG
3069	QMetaMethod smethod = QMetaObjectPrivate::signal(m: smeta, signal_index);
3070	QMetaMethod rmethod = rmeta->method(index: method_index_relative + rmeta->methodOffset());
3071	check_and_warn_compat(sender: smeta, signal: smethod, receiver: rmeta, method: rmethod);
3072	#endif
3073	QMetaObject::Connection handle = QMetaObject::Connection(QMetaObjectPrivate::connect(
3074	sender, signal_index, smeta, receiver, method_index_relative, rmeta ,type, types));
3075	return handle;
3076	}
3077
3078	/*!
3079	\since 4.8
3080
3081	Creates a connection of the given \a type from the \a signal in
3082	the \a sender object to the \a method in the \a receiver object.
3083	Returns a handle to the connection that can be used to disconnect
3084	it later.
3085
3086	The Connection handle will be invalid if it cannot create the
3087	connection, for example, the parameters were invalid.
3088	You can check if the QMetaObject::Connection is valid by casting it to a bool.
3089
3090	This function works in the same way as
3091	\c {connect(const QObject *sender, const char *signal,
3092	const QObject *receiver, const char *method,
3093	Qt::ConnectionType type)}
3094	but it uses QMetaMethod to specify signal and method.
3095
3096	\sa connect(const QObject *sender, const char *signal, const QObject *receiver, const char *method, Qt::ConnectionType type)
3097	*/
3098	QMetaObject::Connection QObject::connect(const QObject *sender, const QMetaMethod &signal,
3099	const QObject *receiver, const QMetaMethod &method,
3100	Qt::ConnectionType type)
3101	{
3102	if (sender == nullptr
3103	|| receiver == nullptr
3104	|| signal.methodType() != QMetaMethod::Signal
3105	|| method.methodType() == QMetaMethod::Constructor) {
3106	qCWarning(lcConnect, "QObject::connect: Cannot connect %s::%s to %s::%s",
3107	sender ? sender->metaObject()->className() : "(nullptr)",
3108	signal.methodSignature().constData(),
3109	receiver ? receiver->metaObject()->className() : "(nullptr)",
3110	method.methodSignature().constData());
3111	return QMetaObject::Connection(nullptr);
3112	}
3113
3114	int signal_index;
3115	int method_index;
3116	{
3117	int dummy;
3118	QMetaObjectPrivate::memberIndexes(obj: sender, member: signal, signalIndex: &signal_index, methodIndex: &dummy);
3119	QMetaObjectPrivate::memberIndexes(obj: receiver, member: method, signalIndex: &dummy, methodIndex: &method_index);
3120	}
3121
3122	const QMetaObject *smeta = sender->metaObject();
3123	const QMetaObject *rmeta = receiver->metaObject();
3124	if (signal_index == -1) {
3125	qCWarning(lcConnect, "QObject::connect: Can't find signal %s on instance of class %s",
3126	signal.methodSignature().constData(), smeta->className());
3127	return QMetaObject::Connection(nullptr);
3128	}
3129	if (method_index == -1) {
3130	qCWarning(lcConnect, "QObject::connect: Can't find method %s on instance of class %s",
3131	method.methodSignature().constData(), rmeta->className());
3132	return QMetaObject::Connection(nullptr);
3133	}
3134
3135	if (!QMetaObject::checkConnectArgs(signal: signal.methodSignature().constData(),
3136	method: method.methodSignature().constData())) {
3137	qCWarning(lcConnect,
3138	"QObject::connect: Incompatible sender/receiver arguments"
3139	"\n %s::%s --> %s::%s",
3140	smeta->className(), signal.methodSignature().constData(), rmeta->className(),
3141	method.methodSignature().constData());
3142	return QMetaObject::Connection(nullptr);
3143	}
3144
3145	int *types = nullptr;
3146	if ((type == Qt::QueuedConnection) && !(types = queuedConnectionTypes(method: signal)))
3147	return QMetaObject::Connection(nullptr);
3148
3149	#ifndef QT_NO_DEBUG
3150	check_and_warn_compat(sender: smeta, signal, receiver: rmeta, method);
3151	#endif
3152	QMetaObject::Connection handle = QMetaObject::Connection(QMetaObjectPrivate::connect(
3153	sender, signal_index, smeta: signal.enclosingMetaObject(), receiver, method_index_relative: method_index, rmeta: nullptr, type, types));
3154	return handle;
3155	}
3156
3157	/*!
3158	\fn bool QObject::connect(const QObject *sender, const char *signal, const char *method, Qt::ConnectionType type) const
3159	\overload connect()
3160	\threadsafe
3161
3162	Connects \a signal from the \a sender object to this object's \a
3163	method.
3164
3165	Equivalent to connect(\a sender, \a signal, \c this, \a method, \a type).
3166
3167	Every connection you make emits a signal, so duplicate connections emit
3168	two signals. You can break a connection using disconnect().
3169
3170	\sa disconnect()
3171	*/
3172
3173	/*!
3174	\threadsafe
3175
3176	Disconnects \a signal in object \a sender from \a method in object
3177	\a receiver. Returns \c true if the connection is successfully broken;
3178	otherwise returns \c false.
3179
3180	A signal-slot connection is removed when either of the objects
3181	involved are destroyed.
3182
3183	disconnect() is typically used in three ways, as the following
3184	examples demonstrate.
3185	\list 1
3186	\li Disconnect everything connected to an object's signals:
3187
3188	\snippet code/src_corelib_kernel_qobject.cpp 26
3189
3190	equivalent to the non-static overloaded function
3191
3192	\snippet code/src_corelib_kernel_qobject.cpp 27
3193
3194	\li Disconnect everything connected to a specific signal:
3195
3196	\snippet code/src_corelib_kernel_qobject.cpp 28
3197
3198	equivalent to the non-static overloaded function
3199
3200	\snippet code/src_corelib_kernel_qobject.cpp 29
3201
3202	\li Disconnect a specific receiver:
3203
3204	\snippet code/src_corelib_kernel_qobject.cpp 30
3205
3206	equivalent to the non-static overloaded function
3207
3208	\snippet code/src_corelib_kernel_qobject.cpp 31
3209
3210	\endlist
3211
3212	\include includes/qobject.qdocinc disconnect-mismatch
3213	\include includes/qobject.qdocinc disconnect-queued
3214
3215	\nullptr may be used as a wildcard, meaning "any signal", "any receiving
3216	object", or "any slot in the receiving object", respectively.
3217
3218	The \a sender may never be \nullptr. (You cannot disconnect signals
3219	from more than one object in a single call.)
3220
3221	If \a signal is \nullptr, it disconnects \a receiver and \a method from
3222	any signal. If not, only the specified signal is disconnected.
3223
3224	If \a receiver is \nullptr, it disconnects anything connected to \a
3225	signal. If not, slots in objects other than \a receiver are not
3226	disconnected.
3227
3228	If \a method is \nullptr, it disconnects anything that is connected to \a
3229	receiver. If not, only slots named \a method will be disconnected,
3230	and all other slots are left alone. The \a method must be \nullptr
3231	if \a receiver is left out, so you cannot disconnect a
3232	specifically-named slot on all objects.
3233
3234	\include includes/qobject.qdocinc disconnect-all
3235
3236	\sa connect()
3237	*/
3238	bool QObject::disconnect(const QObject *sender, const char *signal,
3239	const QObject *receiver, const char *method)
3240	{
3241	if (sender == nullptr || (receiver == nullptr && method != nullptr)) {
3242	qCWarning(lcConnect, "QObject::disconnect: Unexpected nullptr parameter");
3243	return false;
3244	}
3245
3246	const char *signal_arg = signal;
3247	QByteArray signal_name;
3248	bool signal_found = false;
3249	if (signal) {
3250	QT_TRY {
3251	signal_name = QMetaObject::normalizedSignature(method: signal);
3252	signal = signal_name.constData();
3253	} QT_CATCH (const std::bad_alloc &) {
3254	// if the signal is already normalized, we can continue.
3255	if (sender->metaObject()->indexOfSignal(signal: signal + 1) == -1)
3256	QT_RETHROW;
3257	}
3258
3259	if (!check_signal_macro(sender, signal, func: "disconnect", op: "unbind"))
3260	return false;
3261	signal++; // skip code
3262	}
3263
3264	QByteArray method_name;
3265	const char *method_arg = method;
3266	int membcode = -1;
3267	bool method_found = false;
3268	if (method) {
3269	QT_TRY {
3270	method_name = QMetaObject::normalizedSignature(method);
3271	method = method_name.constData();
3272	} QT_CATCH(const std::bad_alloc &) {
3273	// if the method is already normalized, we can continue.
3274	if (receiver->metaObject()->indexOfMethod(method: method + 1) == -1)
3275	QT_RETHROW;
3276	}
3277
3278	membcode = extract_code(member: method);
3279	if (!check_method_code(code: membcode, object: receiver, method, func: "disconnect"))
3280	return false;
3281	method++; // skip code
3282	}
3283
3284	/* We now iterate through all the sender's and receiver's meta
3285	* objects in order to also disconnect possibly shadowed signals
3286	* and slots with the same signature.
3287	*/
3288	bool res = false;
3289	const QMetaObject *smeta = sender->metaObject();
3290	QByteArray signalName;
3291	QArgumentTypeArray signalTypes;
3292	Q_ASSERT(QMetaObjectPrivate::get(smeta)->revision >= 7);
3293	if (signal)
3294	signalName = QMetaObjectPrivate::decodeMethodSignature(signature: signal, types&: signalTypes);
3295	QByteArray methodName;
3296	QArgumentTypeArray methodTypes;
3297	Q_ASSERT(!receiver || QMetaObjectPrivate::get(receiver->metaObject())->revision >= 7);
3298	if (method)
3299	methodName = QMetaObjectPrivate::decodeMethodSignature(signature: method, types&: methodTypes);
3300	do {
3301	int signal_index = -1;
3302	if (signal) {
3303	signal_index = QMetaObjectPrivate::indexOfSignalRelative(
3304	baseObject: &smeta, name: signalName, argc: signalTypes.size(), types: signalTypes.constData());
3305	if (signal_index < 0)
3306	break;
3307	signal_index = QMetaObjectPrivate::originalClone(obj: smeta, local_method_index: signal_index);
3308	signal_index += QMetaObjectPrivate::signalOffset(m: smeta);
3309	signal_found = true;
3310	}
3311
3312	if (!method) {
3313	res |= QMetaObjectPrivate::disconnect(sender, signal_index, smeta, receiver, method_index: -1, slot: nullptr);
3314	} else {
3315	const QMetaObject *rmeta = receiver->metaObject();
3316	do {
3317	int method_index = QMetaObjectPrivate::indexOfMethod(
3318	m: rmeta, name: methodName, argc: methodTypes.size(), types: methodTypes.constData());
3319	if (method_index >= 0)
3320	while (method_index < rmeta->methodOffset())
3321	rmeta = rmeta->superClass();
3322	if (method_index < 0)
3323	break;
3324	res |= QMetaObjectPrivate::disconnect(sender, signal_index, smeta, receiver, method_index, slot: nullptr);
3325	method_found = true;
3326	} while ((rmeta = rmeta->superClass()));
3327	}
3328	} while (signal && (smeta = smeta->superClass()));
3329
3330	if (signal && !signal_found) {
3331	err_method_notfound(object: sender, method: signal_arg, func: "disconnect");
3332	err_info_about_objects(func: "disconnect", sender, receiver);
3333	} else if (method && !method_found) {
3334	err_method_notfound(object: receiver, method: method_arg, func: "disconnect");
3335	err_info_about_objects(func: "disconnect", sender, receiver);
3336	}
3337	if (res) {
3338	if (!signal)
3339	const_cast<QObject *>(sender)->disconnectNotify(signal: QMetaMethod());
3340	}
3341	return res;
3342	}
3343
3344	/*!
3345	\since 4.8
3346
3347	Disconnects \a signal in object \a sender from \a method in object
3348	\a receiver. Returns \c true if the connection is successfully broken;
3349	otherwise returns \c false.
3350
3351	This function provides the same possibilities like
3352	\c {disconnect(const QObject *sender, const char *signal, const QObject *receiver, const char *method) }
3353	but uses QMetaMethod to represent the signal and the method to be disconnected.
3354
3355	Additionally this function returns false and no signals and slots disconnected
3356	if:
3357	\list 1
3358
3359	\li \a signal is not a member of sender class or one of its parent classes.
3360
3361	\li \a method is not a member of receiver class or one of its parent classes.
3362
3363	\li \a signal instance represents not a signal.
3364
3365	\endlist
3366
3367	\include includes/qobject.qdocinc disconnect-mismatch
3368	\include includes/qobject.qdocinc disconnect-queued
3369
3370	QMetaMethod() may be used as wildcard in the meaning "any signal" or "any slot in receiving object".
3371	In the same way \nullptr can be used for \a receiver in the meaning "any receiving object".
3372	In this case method should also be QMetaMethod(). \a sender parameter should be never \nullptr.
3373
3374	\include includes/qobject.qdocinc disconnect-all
3375
3376	\sa disconnect(const QObject *sender, const char *signal, const QObject *receiver, const char *method)
3377	*/
3378	bool QObject::disconnect(const QObject *sender, const QMetaMethod &signal,
3379	const QObject *receiver, const QMetaMethod &method)
3380	{
3381	if (sender == nullptr || (receiver == nullptr && method.mobj != nullptr)) {
3382	qCWarning(lcConnect, "QObject::disconnect: Unexpected nullptr parameter");
3383	return false;
3384	}
3385	if (signal.mobj) {
3386	if (signal.methodType() != QMetaMethod::Signal) {
3387	qCWarning(lcConnect, "QObject::%s: Attempt to %s non-signal %s::%s",
3388	"disconnect","unbind",
3389	sender->metaObject()->className(), signal.methodSignature().constData());
3390	return false;
3391	}
3392	}
3393	if (method.mobj) {
3394	if (method.methodType() == QMetaMethod::Constructor) {
3395	qCWarning(lcConnect, "QObject::disconnect: cannot use constructor as argument %s::%s",
3396	receiver->metaObject()->className(), method.methodSignature().constData());
3397	return false;
3398	}
3399	}
3400
3401	int signal_index;
3402	int method_index;
3403	{
3404	int dummy;
3405	QMetaObjectPrivate::memberIndexes(obj: sender, member: signal, signalIndex: &signal_index, methodIndex: &dummy);
3406	QMetaObjectPrivate::memberIndexes(obj: receiver, member: method, signalIndex: &dummy, methodIndex: &method_index);
3407	}
3408	// If we are here sender is not nullptr. If signal is not nullptr while signal_index
3409	// is -1 then this signal is not a member of sender.
3410	if (signal.mobj && signal_index == -1) {
3411	qCWarning(lcConnect, "QObject::disconnect: signal %s not found on class %s",
3412	signal.methodSignature().constData(), sender->metaObject()->className());
3413	return false;
3414	}
3415	// If this condition is true then method is not a member of receiver.
3416	if (receiver && method.mobj && method_index == -1) {
3417	qCWarning(lcConnect, "QObject::disconnect: method %s not found on class %s",
3418	method.methodSignature().constData(), receiver->metaObject()->className());
3419	return false;
3420	}
3421
3422	if (!QMetaObjectPrivate::disconnect(sender, signal_index, smeta: signal.mobj, receiver, method_index, slot: nullptr))
3423	return false;
3424
3425	if (!signal.isValid()) {
3426	// The signal is a wildcard, meaning all signals were disconnected.
3427	// QMetaObjectPrivate::disconnect() doesn't call disconnectNotify()
3428	// per connection in this case. Call it once now, with an invalid
3429	// QMetaMethod as argument, as documented.
3430	const_cast<QObject *>(sender)->disconnectNotify(signal);
3431	}
3432	return true;
3433	}
3434
3435	/*!
3436	\threadsafe
3437
3438	\fn bool QObject::disconnect(const char *signal, const QObject *receiver, const char *method) const
3439	\overload disconnect()
3440
3441	Disconnects \a signal from \a method of \a receiver.
3442
3443	\include includes/qobject.qdocinc disconnect-mismatch
3444	\include includes/qobject.qdocinc disconnect-queued
3445
3446	A signal-slot connection is removed when either of the objects
3447	involved are destroyed.
3448
3449	\include includes/qobject.qdocinc disconnect-all
3450	*/
3451
3452	/*!
3453	\fn bool QObject::disconnect(const QObject *receiver, const char *method) const
3454	\overload disconnect()
3455
3456	Disconnects all signals in this object from \a receiver's \a
3457	method.
3458
3459	\include includes/qobject.qdocinc disconnect-mismatch
3460	\include includes/qobject.qdocinc disconnect-queued
3461
3462	A signal-slot connection is removed when either of the objects
3463	involved are destroyed.
3464	*/
3465
3466
3467	/*!
3468	\since 5.0
3469
3470	This virtual function is called when something has been connected
3471	to \a signal in this object.
3472
3473	If you want to compare \a signal with a specific signal, you can
3474	use QMetaMethod::fromSignal() as follows:
3475
3476	\snippet code/src_corelib_kernel_qobject.cpp 32
3477
3478	\warning This function violates the object-oriented principle of
3479	modularity. However, it might be useful when you need to perform
3480	an expensive operation only if something is connected to a signal.
3481
3482	\warning This function is called from the thread which performs the
3483	connection, which may be a different thread from the thread in which
3484	this object lives. This function may also be called with a QObject internal
3485	mutex locked. It is therefore not allowed to re-enter any QObject
3486	functions, including isSignalConnected(), from your reimplementation. If
3487	you lock a mutex in your reimplementation, make sure that you don't call
3488	QObject functions with that mutex held in other places or it will result in
3489	a deadlock.
3490
3491	\sa connect(), disconnectNotify()
3492	*/
3493
3494	void QObject::connectNotify(const QMetaMethod &signal)
3495	{
3496	Q_UNUSED(signal);
3497	}
3498
3499	/*!
3500	\since 5.0
3501
3502	This virtual function is called when something has been
3503	disconnected from \a signal in this object.
3504
3505	See connectNotify() for an example of how to compare
3506	\a signal with a specific signal.
3507
3508	If all signals were disconnected from this object (e.g., the
3509	signal argument to disconnect() was \nullptr), disconnectNotify()
3510	is only called once, and the \a signal will be an invalid
3511	QMetaMethod (QMetaMethod::isValid() returns \c false).
3512
3513	\warning This function violates the object-oriented principle of
3514	modularity. However, it might be useful for optimizing access to
3515	expensive resources.
3516
3517	\warning This function is called from the thread which performs the
3518	disconnection, which may be a different thread from the thread in which
3519	this object lives. This function may also be called with a QObject internal
3520	mutex locked. It is therefore not allowed to re-enter any QObject
3521	functions, including isSignalConnected(), from your reimplementation. If
3522	you lock a mutex in your reimplementation, make sure that you don't call
3523	QObject functions with that mutex held in other places or it will result in
3524	a deadlock.
3525
3526	\sa disconnect(), connectNotify()
3527	*/
3528
3529	void QObject::disconnectNotify(const QMetaMethod &signal)
3530	{
3531	Q_UNUSED(signal);
3532	}
3533
3534	/*
3535	\internal
3536	convert a signal index from the method range to the signal range
3537	*/
3538	static int methodIndexToSignalIndex(const QMetaObject **base, int signal_index)
3539	{
3540	if (signal_index < 0)
3541	return signal_index;
3542	const QMetaObject *metaObject = *base;
3543	while (metaObject && metaObject->methodOffset() > signal_index)
3544	metaObject = metaObject->superClass();
3545
3546	if (metaObject) {
3547	int signalOffset, methodOffset;
3548	computeOffsets(metaobject: metaObject, signalOffset: &signalOffset, methodOffset: &methodOffset);
3549	if (signal_index < metaObject->methodCount())
3550	signal_index = QMetaObjectPrivate::originalClone(obj: metaObject, local_method_index: signal_index - methodOffset) + signalOffset;
3551	else
3552	signal_index = signal_index - methodOffset + signalOffset;
3553	*base = metaObject;
3554	}
3555	return signal_index;
3556	}
3557
3558	/*!
3559	\internal
3560	\a types is a 0-terminated vector of meta types for queued
3561	connections.
3562
3563	if \a signal_index is -1, then we effectively connect *all* signals
3564	from the sender to the receiver's slot
3565	*/
3566	QMetaObject::Connection QMetaObject::connect(const QObject *sender, int signal_index,
3567	const QObject *receiver, int method_index, int type,
3568	int *types)
3569	{
3570	const QMetaObject *smeta = sender->metaObject();
3571	signal_index = methodIndexToSignalIndex(base: &smeta, signal_index);
3572	return Connection(QMetaObjectPrivate::connect(sender, signal_index, smeta,
3573	receiver, method_index_relative: method_index,
3574	rmeta: nullptr, //FIXME, we could speed this connection up by computing the relative index
3575	type, types));
3576	}
3577
3578	/*!
3579	\internal
3580	Same as the QMetaObject::connect, but \a signal_index must be the result of QObjectPrivate::signalIndex
3581
3582	method_index is relative to the rmeta metaobject, if rmeta is \nullptr, then it is absolute index
3583
3584	the QObjectPrivate::Connection* has a refcount of 2, so it must be passed to a QMetaObject::Connection
3585	*/
3586	QObjectPrivate::Connection *QMetaObjectPrivate::connect(const QObject *sender,
3587	int signal_index, const QMetaObject *smeta,
3588	const QObject *receiver, int method_index,
3589	const QMetaObject *rmeta, int type, int *types)
3590	{
3591	QObject *s = const_cast<QObject *>(sender);
3592	QObject *r = const_cast<QObject *>(receiver);
3593
3594	int method_offset = rmeta ? rmeta->methodOffset() : 0;
3595	Q_ASSERT(!rmeta || QMetaObjectPrivate::get(rmeta)->revision >= 6);
3596	QObjectPrivate::StaticMetaCallFunction callFunction = rmeta ? rmeta->d.static_metacall : nullptr;
3597
3598	QOrderedMutexLocker locker(signalSlotLock(o: sender),
3599	signalSlotLock(o: receiver));
3600
3601	QObjectPrivate::ConnectionData *scd = QObjectPrivate::get(o: s)->connections.loadRelaxed();
3602	if (type & Qt::UniqueConnection && scd) {
3603	if (scd->signalVectorCount() > signal_index) {
3604	const QObjectPrivate::Connection *c2 = scd->signalVector.loadRelaxed()->at(i: signal_index).first.loadRelaxed();
3605
3606	int method_index_absolute = method_index + method_offset;
3607
3608	while (c2) {
3609	if (!c2->isSlotObject && c2->receiver.loadRelaxed() == receiver && c2->method() == method_index_absolute)
3610	return nullptr;
3611	c2 = c2->nextConnectionList.loadRelaxed();
3612	}
3613	}
3614	}
3615	type &= ~Qt::UniqueConnection;
3616
3617	const bool isSingleShot = type & Qt::SingleShotConnection;
3618	type &= ~Qt::SingleShotConnection;
3619
3620	Q_ASSERT(type >= 0);
3621	Q_ASSERT(type <= 3);
3622
3623	std::unique_ptr<QObjectPrivate::Connection> c{new QObjectPrivate::Connection};
3624	c->sender = s;
3625	c->signal_index = signal_index;
3626	c->receiver.storeRelaxed(newValue: r);
3627	QThreadData *td = r->d_func()->threadData.loadAcquire();
3628	td->ref();
3629	c->receiverThreadData.storeRelaxed(newValue: td);
3630	c->method_relative = method_index;
3631	c->method_offset = method_offset;
3632	c->connectionType = type;
3633	c->isSlotObject = false;
3634	c->argumentTypes.storeRelaxed(newValue: types);
3635	c->callFunction = callFunction;
3636	c->isSingleShot = isSingleShot;
3637
3638	QObjectPrivate::get(o: s)->addConnection(signal: signal_index, c: c.get());
3639
3640	locker.unlock();
3641	QMetaMethod smethod = QMetaObjectPrivate::signal(m: smeta, signal_index);
3642	if (smethod.isValid())
3643	s->connectNotify(signal: smethod);
3644
3645	return c.release();
3646	}
3647
3648	/*!
3649	\internal
3650	*/
3651	bool QMetaObject::disconnect(const QObject *sender, int signal_index,
3652	const QObject *receiver, int method_index)
3653	{
3654	const QMetaObject *smeta = sender->metaObject();
3655	signal_index = methodIndexToSignalIndex(base: &smeta, signal_index);
3656	return QMetaObjectPrivate::disconnect(sender, signal_index, smeta,
3657	receiver, method_index, slot: nullptr);
3658	}
3659
3660	/*!
3661	\internal
3662
3663	Disconnect a single signal connection. If QMetaObject::connect() has been called
3664	multiple times for the same sender, signal_index, receiver and method_index only
3665	one of these connections will be removed.
3666	*/
3667	bool QMetaObject::disconnectOne(const QObject *sender, int signal_index,
3668	const QObject *receiver, int method_index)
3669	{
3670	const QMetaObject *smeta = sender->metaObject();
3671	signal_index = methodIndexToSignalIndex(base: &smeta, signal_index);
3672	return QMetaObjectPrivate::disconnect(sender, signal_index, smeta,
3673	receiver, method_index, slot: nullptr,
3674	QMetaObjectPrivate::DisconnectOne);
3675	}
3676
3677	/*!
3678	\internal
3679	Helper function to remove the connection from the senders list and set the receivers to \nullptr
3680	*/
3681	bool QMetaObjectPrivate::disconnectHelper(QObjectPrivate::ConnectionData *connections, int signalIndex,
3682	const QObject *receiver, int method_index, void **slot,
3683	QBasicMutex *senderMutex, DisconnectType disconnectType)
3684	{
3685	bool success = false;
3686
3687	auto &connectionList = connections->connectionsForSignal(signal: signalIndex);
3688	auto *c = connectionList.first.loadRelaxed();
3689	while (c) {
3690	QObject *r = c->receiver.loadRelaxed();
3691	if (r && (receiver == nullptr || (r == receiver
3692	&& (method_index < 0 || (!c->isSlotObject && c->method() == method_index))
3693	&& (slot == nullptr || (c->isSlotObject && c->slotObj->compare(a: slot)))))) {
3694	bool needToUnlock = false;
3695	QBasicMutex *receiverMutex = nullptr;
3696	if (r) {
3697	receiverMutex = signalSlotLock(o: r);
3698	// need to relock this receiver and sender in the correct order
3699	needToUnlock = QOrderedMutexLocker::relock(mtx1: senderMutex, mtx2: receiverMutex);
3700	}
3701	if (c->receiver.loadRelaxed())
3702	connections->removeConnection(c);
3703
3704	if (needToUnlock)
3705	receiverMutex->unlock();
3706
3707	success = true;
3708
3709	if (disconnectType == DisconnectOne)
3710	return success;
3711	}
3712	c = c->nextConnectionList.loadRelaxed();
3713	}
3714	return success;
3715	}
3716
3717	/*!
3718	\internal
3719	Same as the QMetaObject::disconnect, but \a signal_index must be the result of QObjectPrivate::signalIndex
3720	*/
3721	bool QMetaObjectPrivate::disconnect(const QObject *sender,
3722	int signal_index, const QMetaObject *smeta,
3723	const QObject *receiver, int method_index, void **slot,
3724	DisconnectType disconnectType)
3725	{
3726	if (!sender)
3727	return false;
3728
3729	QObject *s = const_cast<QObject *>(sender);
3730
3731	QBasicMutex *senderMutex = signalSlotLock(o: sender);
3732	QMutexLocker locker(senderMutex);
3733
3734	QObjectPrivate::ConnectionData *scd = QObjectPrivate::get(o: s)->connections.loadRelaxed();
3735	if (!scd)
3736	return false;
3737
3738	bool success = false;
3739	{
3740	// prevent incoming connections changing the connections->receivers while unlocked
3741	QObjectPrivate::ConnectionDataPointer connections(scd);
3742
3743	if (signal_index < 0) {
3744	// remove from all connection lists
3745	for (int sig_index = -1; sig_index < scd->signalVectorCount(); ++sig_index) {
3746	if (disconnectHelper(connections: connections.data(), signalIndex: sig_index, receiver, method_index, slot, senderMutex, disconnectType))
3747	success = true;
3748	}
3749	} else if (signal_index < scd->signalVectorCount()) {
3750	if (disconnectHelper(connections: connections.data(), signalIndex: signal_index, receiver, method_index, slot, senderMutex, disconnectType))
3751	success = true;
3752	}
3753	}
3754
3755	locker.unlock();
3756	if (success) {
3757	scd->cleanOrphanedConnections(sender: s);
3758
3759	QMetaMethod smethod = QMetaObjectPrivate::signal(m: smeta, signal_index);
3760	if (smethod.isValid())
3761	s->disconnectNotify(signal: smethod);
3762	}
3763
3764	return success;
3765	}
3766
3767	// Helpers for formatting the connect statements of connectSlotsByName()'s debug mode
3768	static QByteArray formatConnectionSignature(const char *className, const QMetaMethod &method)
3769	{
3770	const auto signature = method.methodSignature();
3771	Q_ASSERT(signature.endsWith(')'));
3772	const int openParen = signature.indexOf(c: '(');
3773	const bool hasParameters = openParen >= 0 && openParen < signature.size() - 2;
3774	QByteArray result;
3775	if (hasParameters) {
3776	result += "qOverload<"
3777	+ signature.mid(index: openParen + 1, len: signature.size() - openParen - 2) + ">(";
3778	}
3779	result += '&';
3780	result += className + QByteArrayLiteral("::") + method.name();
3781	if (hasParameters)
3782	result += ')';
3783	return result;
3784	}
3785
3786	static QByteArray msgConnect(const QMetaObject *senderMo, const QByteArray &senderName,
3787	const QMetaMethod &signal, const QObject *receiver, int receiverIndex)
3788	{
3789	const auto receiverMo = receiver->metaObject();
3790	const auto slot = receiverMo->method(index: receiverIndex);
3791	QByteArray message = QByteArrayLiteral("QObject::connect(")
3792	+ senderName + ", " + formatConnectionSignature(className: senderMo->className(), method: signal)
3793	+ ", " + receiver->objectName().toLatin1() + ", "
3794	+ formatConnectionSignature(className: receiverMo->className(), method: slot) + ");";
3795	return message;
3796	}
3797
3798	/*!
3799	\fn void QMetaObject::connectSlotsByName(QObject *object)
3800
3801	Searches recursively for all child objects of the given \a object, and connects
3802	matching signals from them to slots of \a object that follow the following form:
3803
3804	\snippet code/src_corelib_kernel_qobject.cpp 33
3805
3806	Let's assume our object has a child object of type \c{QPushButton} with
3807	the \l{QObject::objectName}{object name} \c{button1}. The slot to catch the
3808	button's \c{clicked()} signal would be:
3809
3810	\snippet code/src_corelib_kernel_qobject.cpp 34
3811
3812	If \a object itself has a properly set object name, its own signals are also
3813	connected to its respective slots.
3814
3815	\sa QObject::setObjectName()
3816	*/
3817	void QMetaObject::connectSlotsByName(QObject *o)
3818	{
3819	if (!o)
3820	return;
3821	const QMetaObject *mo = o->metaObject();
3822	Q_ASSERT(mo);
3823	const QObjectList list = // list of all objects to look for matching signals including...
3824	o->findChildren<QObject *>() // all children of 'o'...
3825	<< o; // and the object 'o' itself
3826
3827	// for each method/slot of o ...
3828	for (int i = 0; i < mo->methodCount(); ++i) {
3829	const QByteArray slotSignature = mo->method(index: i).methodSignature();
3830	const char *slot = slotSignature.constData();
3831	Q_ASSERT(slot);
3832
3833	// ...that starts with "on_", ...
3834	if (slot[0] != 'o' || slot[1] != 'n' || slot[2] != '_')
3835	continue;
3836
3837	// ...we check each object in our list, ...
3838	bool foundIt = false;
3839	for (int j = 0; j < list.size(); ++j) {
3840	const QObject *co = list.at(i: j);
3841	const QByteArray coName = co->objectName().toLatin1();
3842
3843	// ...discarding those whose objectName is not fitting the pattern "on_<objectName>_...", ...
3844	if (coName.isEmpty() || qstrncmp(str1: slot + 3, str2: coName.constData(), len: coName.size()) || slot[coName.size()+3] != '_')
3845	continue;
3846
3847	const char *signal = slot + coName.size() + 4; // the 'signal' part of the slot name
3848
3849	// ...for the presence of a matching signal "on_<objectName>_<signal>".
3850	const QMetaObject *smeta;
3851	int sigIndex = co->d_func()->signalIndex(signalName: signal, meta: &smeta);
3852	if (sigIndex < 0) {
3853	// if no exactly fitting signal (name + complete parameter type list) could be found
3854	// look for just any signal with the correct name and at least the slot's parameter list.
3855	// Note: if more than one of those signals exist, the one that gets connected is
3856	// chosen 'at random' (order of declaration in source file)
3857	QList<QByteArray> compatibleSignals;
3858	const QMetaObject *smo = co->metaObject();
3859	int sigLen = int(qstrlen(str: signal)) - 1; // ignore the trailing ')'
3860	for (int k = QMetaObjectPrivate::absoluteSignalCount(m: smo)-1; k >= 0; --k) {
3861	const QMetaMethod method = QMetaObjectPrivate::signal(m: smo, signal_index: k);
3862	if (!qstrncmp(str1: method.methodSignature().constData(), str2: signal, len: sigLen)) {
3863	smeta = method.enclosingMetaObject();
3864	sigIndex = k;
3865	compatibleSignals.prepend(t: method.methodSignature());
3866	}
3867	}
3868	if (compatibleSignals.size() > 1)
3869	qCWarning(lcConnectSlotsByName) << "QMetaObject::connectSlotsByName: Connecting slot" << slot
3870	<< "with the first of the following compatible signals:" << compatibleSignals;
3871	}
3872
3873	if (sigIndex < 0)
3874	continue;
3875
3876	// we connect it...
3877	if (Connection(QMetaObjectPrivate::connect(sender: co, signal_index: sigIndex, smeta, receiver: o, method_index: i))) {
3878	foundIt = true;
3879	qCDebug(lcConnectSlotsByName, "%s",
3880	msgConnect(smeta, coName, QMetaObjectPrivate::signal(smeta, sigIndex), o, i).constData());
3881	// ...and stop looking for further objects with the same name.
3882	// Note: the Designer will make sure each object name is unique in the above
3883	// 'list' but other code may create two child objects with the same name. In
3884	// this case one is chosen 'at random'.
3885	break;
3886	}
3887	}
3888	if (foundIt) {
3889	// we found our slot, now skip all overloads
3890	while (mo->method(index: i + 1).attributes() & QMetaMethod::Cloned)
3891	++i;
3892	} else if (!(mo->method(index: i).attributes() & QMetaMethod::Cloned)) {
3893	// check if the slot has the following signature: "on_..._...(..."
3894	int iParen = slotSignature.indexOf(c: '(');
3895	int iLastUnderscore = slotSignature.lastIndexOf(c: '_', from: iParen - 1);
3896	if (iLastUnderscore > 3)
3897	qCWarning(lcConnectSlotsByName,
3898	"QMetaObject::connectSlotsByName: No matching signal for %s", slot);
3899	}
3900	}
3901	}
3902
3903	/*!
3904	\internal
3905	A small RAII helper for QSlotObjectBase.
3906	Calls ref on construction and destroyLastRef in its dtor.
3907	Allows construction from a nullptr in which case it does nothing.
3908	*/
3909	struct SlotObjectGuard {
3910	SlotObjectGuard() = default;
3911	// move would be fine, but we do not need it currently
3912	Q_DISABLE_COPY_MOVE(SlotObjectGuard)
3913	Q_NODISCARD_CTOR explicit SlotObjectGuard(QtPrivate::QSlotObjectBase *slotObject)
3914	: m_slotObject(slotObject)
3915	{
3916	if (m_slotObject)
3917	m_slotObject->ref();
3918	}
3919
3920	QtPrivate::QSlotObjectBase const *operator->() const
3921	{ return m_slotObject.get(); }
3922
3923	QtPrivate::QSlotObjectBase *operator->()
3924	{ return m_slotObject.get(); }
3925
3926	~SlotObjectGuard() = default;
3927	private:
3928	QtPrivate::SlotObjUniquePtr m_slotObject;
3929	};
3930
3931	/*!
3932	\internal
3933
3934	\a signal must be in the signal index range (see QObjectPrivate::signalIndex()).
3935	*/
3936	static void queued_activate(QObject *sender, int signal, QObjectPrivate::Connection *c, void **argv)
3937	{
3938	const int *argumentTypes = c->argumentTypes.loadRelaxed();
3939	if (!argumentTypes) {
3940	QMetaMethod m = QMetaObjectPrivate::signal(m: sender->metaObject(), signal_index: signal);
3941	argumentTypes = queuedConnectionTypes(method: m);
3942	if (!argumentTypes) // cannot queue arguments
3943	argumentTypes = &DIRECT_CONNECTION_ONLY;
3944	if (!c->argumentTypes.testAndSetOrdered(expectedValue: nullptr, newValue: argumentTypes)) {
3945	if (argumentTypes != &DIRECT_CONNECTION_ONLY)
3946	delete[] argumentTypes;
3947	argumentTypes = c->argumentTypes.loadRelaxed();
3948	}
3949	}
3950	if (argumentTypes == &DIRECT_CONNECTION_ONLY) // cannot activate
3951	return;
3952	int nargs = 1; // include return type
3953	while (argumentTypes[nargs - 1])
3954	++nargs;
3955
3956	QMutexLocker locker(signalSlotLock(o: c->receiver.loadRelaxed()));
3957	QObject *receiver = c->receiver.loadRelaxed();
3958	if (!receiver) {
3959	// the connection has been disconnected before we got the lock
3960	return;
3961	}
3962
3963	SlotObjectGuard slotObjectGuard { c->isSlotObject ? c->slotObj : nullptr };
3964	locker.unlock();
3965
3966	QMetaCallEvent *ev = c->isSlotObject ?
3967	new QMetaCallEvent(c->slotObj, sender, signal, nargs) :
3968	new QMetaCallEvent(c->method_offset, c->method_relative, c->callFunction, sender, signal, nargs);
3969
3970	void **args = ev->args();
3971	QMetaType *types = ev->types();
3972
3973	types[0] = QMetaType(); // return type
3974	args[0] = nullptr; // return value
3975
3976	if (nargs > 1) {
3977	for (int n = 1; n < nargs; ++n)
3978	types[n] = QMetaType(argumentTypes[n - 1]);
3979
3980	for (int n = 1; n < nargs; ++n)
3981	args[n] = types[n].create(copy: argv[n]);
3982	}
3983
3984	if (c->isSingleShot && !QObjectPrivate::removeConnection(c)) {
3985	delete ev;
3986	return;
3987	}
3988
3989	locker.relock();
3990	if (!c->isSingleShot && !c->receiver.loadRelaxed()) {
3991	// the connection has been disconnected while we were unlocked
3992	locker.unlock();
3993	delete ev;
3994	return;
3995	}
3996
3997	QCoreApplication::postEvent(receiver, event: ev);
3998	}
3999
4000	template <bool callbacks_enabled>
4001	void doActivate(QObject *sender, int signal_index, void **argv)
4002	{
4003	QObjectPrivate *sp = QObjectPrivate::get(o: sender);
4004
4005	if (sp->blockSig)
4006	return;
4007
4008	Q_TRACE_SCOPE(QMetaObject_activate, sender, signal_index);
4009
4010	if (sp->isDeclarativeSignalConnected(signal_index)
4011	&& QAbstractDeclarativeData::signalEmitted) {
4012	Q_TRACE_SCOPE(QMetaObject_activate_declarative_signal, sender, signal_index);
4013	QAbstractDeclarativeData::signalEmitted(sp->declarativeData, sender,
4014	signal_index, argv);
4015	}
4016
4017	const QSignalSpyCallbackSet *signal_spy_set = callbacks_enabled ? qt_signal_spy_callback_set.loadAcquire() : nullptr;
4018
4019	void *empty_argv[] = { nullptr };
4020	if (!argv)
4021	argv = empty_argv;
4022
4023	if (!sp->maybeSignalConnected(signalIndex: signal_index)) {
4024	// The possible declarative connection is done, and nothing else is connected
4025	if (callbacks_enabled && signal_spy_set->signal_begin_callback != nullptr)
4026	signal_spy_set->signal_begin_callback(sender, signal_index, argv);
4027	if (callbacks_enabled && signal_spy_set->signal_end_callback != nullptr)
4028	signal_spy_set->signal_end_callback(sender, signal_index);
4029	return;
4030	}
4031
4032	if (callbacks_enabled && signal_spy_set->signal_begin_callback != nullptr)
4033	signal_spy_set->signal_begin_callback(sender, signal_index, argv);
4034
4035	bool senderDeleted = false;
4036	{
4037	Q_ASSERT(sp->connections.loadRelaxed());
4038	QObjectPrivate::ConnectionDataPointer connections(sp->connections.loadAcquire());
4039	QObjectPrivate::SignalVector *signalVector = connections->signalVector.loadRelaxed();
4040
4041	const QObjectPrivate::ConnectionList *list;
4042	if (signal_index < signalVector->count())
4043	list = &signalVector->at(i: signal_index);
4044	else
4045	list = &signalVector->at(i: -1);
4046
4047	Qt::HANDLE currentThreadId = QThread::currentThreadId();
4048	bool inSenderThread = currentThreadId == QObjectPrivate::get(o: sender)->threadData.loadRelaxed()->threadId.loadRelaxed();
4049
4050	// We need to check against the highest connection id to ensure that signals added
4051	// during the signal emission are not emitted in this emission.
4052	uint highestConnectionId = connections->currentConnectionId.loadRelaxed();
4053	do {
4054	QObjectPrivate::Connection *c = list->first.loadRelaxed();
4055	if (!c)
4056	continue;
4057
4058	do {
4059	QObject * const receiver = c->receiver.loadRelaxed();
4060	if (!receiver)
4061	continue;
4062
4063	QThreadData *td = c->receiverThreadData.loadRelaxed();
4064	if (!td)
4065	continue;
4066
4067	bool receiverInSameThread;
4068	if (inSenderThread) {
4069	receiverInSameThread = currentThreadId == td->threadId.loadRelaxed();
4070	} else {
4071	// need to lock before reading the threadId, because moveToThread() could interfere
4072	QMutexLocker lock(signalSlotLock(o: receiver));
4073	receiverInSameThread = currentThreadId == td->threadId.loadRelaxed();
4074	}
4075
4076
4077	// determine if this connection should be sent immediately or
4078	// put into the event queue
4079	if ((c->connectionType == Qt::AutoConnection && !receiverInSameThread)
4080	|| (c->connectionType == Qt::QueuedConnection)) {
4081	queued_activate(sender, signal: signal_index, c, argv);
4082	continue;
4083	#if QT_CONFIG(thread)
4084	} else if (c->connectionType == Qt::BlockingQueuedConnection) {
4085	if (receiverInSameThread) {
4086	qWarning(msg: "Qt: Dead lock detected while activating a BlockingQueuedConnection: "
4087	"Sender is %s(%p), receiver is %s(%p)",
4088	sender->metaObject()->className(), sender,
4089	receiver->metaObject()->className(), receiver);
4090	}
4091
4092	if (c->isSingleShot && !QObjectPrivate::removeConnection(c))
4093	continue;
4094
4095	QSemaphore semaphore;
4096	{
4097	QMutexLocker locker(signalSlotLock(o: receiver));
4098	if (!c->isSingleShot && !c->receiver.loadAcquire())
4099	continue;
4100	QMetaCallEvent *ev = c->isSlotObject ?
4101	new QMetaCallEvent(c->slotObj, sender, signal_index, argv, &semaphore) :
4102	new QMetaCallEvent(c->method_offset, c->method_relative, c->callFunction,
4103	sender, signal_index, argv, &semaphore);
4104	QCoreApplication::postEvent(receiver, event: ev);
4105	}
4106	semaphore.acquire();
4107	continue;
4108	#endif
4109	}
4110
4111	if (c->isSingleShot && !QObjectPrivate::removeConnection(c))
4112	continue;
4113
4114	QObjectPrivate::Sender senderData(
4115	receiverInSameThread ? receiver : nullptr, sender, signal_index,
4116	receiverInSameThread ? QObjectPrivate::get(o: receiver)->connections.loadAcquire() : nullptr);
4117
4118	if (c->isSlotObject) {
4119	SlotObjectGuard obj{c->slotObj};
4120
4121	{
4122	Q_TRACE_SCOPE(QMetaObject_activate_slot_functor, c->slotObj);
4123	obj->call(r: receiver, a: argv);
4124	}
4125	} else if (c->callFunction && c->method_offset <= receiver->metaObject()->methodOffset()) {
4126	//we compare the vtable to make sure we are not in the destructor of the object.
4127	const int method_relative = c->method_relative;
4128	const auto callFunction = c->callFunction;
4129	const int methodIndex = (Q_HAS_TRACEPOINTS || callbacks_enabled) ? c->method() : 0;
4130	if (callbacks_enabled && signal_spy_set->slot_begin_callback != nullptr)
4131	signal_spy_set->slot_begin_callback(receiver, methodIndex, argv);
4132
4133	{
4134	Q_TRACE_SCOPE(QMetaObject_activate_slot, receiver, methodIndex);
4135	callFunction(receiver, QMetaObject::InvokeMetaMethod, method_relative, argv);
4136	}
4137
4138	if (callbacks_enabled && signal_spy_set->slot_end_callback != nullptr)
4139	signal_spy_set->slot_end_callback(receiver, methodIndex);
4140	} else {
4141	const int method = c->method_relative + c->method_offset;
4142
4143	if (callbacks_enabled && signal_spy_set->slot_begin_callback != nullptr) {
4144	signal_spy_set->slot_begin_callback(receiver, method, argv);
4145	}
4146
4147	{
4148	Q_TRACE_SCOPE(QMetaObject_activate_slot, receiver, method);
4149	QMetaObject::metacall(receiver, QMetaObject::InvokeMetaMethod, method, argv);
4150	}
4151
4152	if (callbacks_enabled && signal_spy_set->slot_end_callback != nullptr)
4153	signal_spy_set->slot_end_callback(receiver, method);
4154	}
4155	} while ((c = c->nextConnectionList.loadRelaxed()) != nullptr && c->id <= highestConnectionId);
4156
4157	} while (list != &signalVector->at(i: -1) &&
4158	//start over for all signals;
4159	((list = &signalVector->at(i: -1)), true));
4160
4161	if (connections->currentConnectionId.loadRelaxed() == 0)
4162	senderDeleted = true;
4163	}
4164	if (!senderDeleted) {
4165	sp->connections.loadAcquire()->cleanOrphanedConnections(sender);
4166
4167	if (callbacks_enabled && signal_spy_set->signal_end_callback != nullptr)
4168	signal_spy_set->signal_end_callback(sender, signal_index);
4169	}
4170	}
4171
4172	/*!
4173	\internal
4174	*/
4175	void QMetaObject::activate(QObject *sender, const QMetaObject *m, int local_signal_index,
4176	void **argv)
4177	{
4178	int signal_index = local_signal_index + QMetaObjectPrivate::signalOffset(m);
4179
4180	if (Q_UNLIKELY(qt_signal_spy_callback_set.loadRelaxed()))
4181	doActivate<true>(sender, signal_index, argv);
4182	else
4183	doActivate<false>(sender, signal_index, argv);
4184	}
4185
4186	/*!
4187	\internal
4188	*/
4189	void QMetaObject::activate(QObject *sender, int signalOffset, int local_signal_index, void **argv)
4190	{
4191	int signal_index = signalOffset + local_signal_index;
4192
4193	if (Q_UNLIKELY(qt_signal_spy_callback_set.loadRelaxed()))
4194	doActivate<true>(sender, signal_index, argv);
4195	else
4196	doActivate<false>(sender, signal_index, argv);
4197	}
4198
4199	/*!
4200	\internal
4201	signal_index comes from indexOfMethod()
4202	*/
4203	void QMetaObject::activate(QObject *sender, int signal_index, void **argv)
4204	{
4205	const QMetaObject *mo = sender->metaObject();
4206	while (mo->methodOffset() > signal_index)
4207	mo = mo->superClass();
4208	activate(sender, m: mo, local_signal_index: signal_index - mo->methodOffset(), argv);
4209	}
4210
4211	/*!
4212	\internal
4213	Returns the signal index used in the internal connections->receivers vector.
4214
4215	It is different from QMetaObject::indexOfSignal(): indexOfSignal is the same as indexOfMethod
4216	while QObjectPrivate::signalIndex is smaller because it doesn't give index to slots.
4217
4218	If \a meta is not \nullptr, it is set to the meta-object where the signal was found.
4219	*/
4220	int QObjectPrivate::signalIndex(const char *signalName,
4221	const QMetaObject **meta) const
4222	{
4223	Q_Q(const QObject);
4224	const QMetaObject *base = q->metaObject();
4225	Q_ASSERT(QMetaObjectPrivate::get(base)->revision >= 7);
4226	QArgumentTypeArray types;
4227	QByteArray name = QMetaObjectPrivate::decodeMethodSignature(signature: signalName, types);
4228	int relative_index = QMetaObjectPrivate::indexOfSignalRelative(
4229	baseObject: &base, name, argc: types.size(), types: types.constData());
4230	if (relative_index < 0)
4231	return relative_index;
4232	relative_index = QMetaObjectPrivate::originalClone(obj: base, local_method_index: relative_index);
4233	if (meta)
4234	*meta = base;
4235	return relative_index + QMetaObjectPrivate::signalOffset(m: base);
4236	}
4237
4238	/*****************************************************************************
4239	Properties
4240	*****************************************************************************/
4241
4242	/*!
4243	\fn bool QObject::setProperty(const char *name, const QVariant &value)
4244
4245	Sets the value of the object's \a name property to \a value.
4246
4247	If the property is defined in the class using Q_PROPERTY then
4248	true is returned on success and false otherwise. If the property
4249	is not defined using Q_PROPERTY, and therefore not listed in the
4250	meta-object, it is added as a dynamic property and false is returned.
4251
4252	Information about all available properties is provided through the
4253	metaObject() and dynamicPropertyNames().
4254
4255	Dynamic properties can be queried again using property() and can be
4256	removed by setting the property value to an invalid QVariant.
4257	Changing the value of a dynamic property causes a QDynamicPropertyChangeEvent
4258	to be sent to the object.
4259
4260	\b{Note:} Dynamic properties starting with "_q_" are reserved for internal
4261	purposes.
4262
4263	\sa property(), metaObject(), dynamicPropertyNames(), QMetaProperty::write()
4264	*/
4265
4266	/*!
4267	\fn bool QObject::setProperty(const char *name, QVariant &&value)
4268	\since 6.6
4269	\overload setProperty
4270	*/
4271
4272	bool QObject::doSetProperty(const char *name, const QVariant *lvalue, QVariant *rvalue)
4273	{
4274	Q_D(QObject);
4275	const auto &value =*lvalue;
4276	const QMetaObject *meta = metaObject();
4277	if (!name || !meta)
4278	return false;
4279
4280	int id = meta->indexOfProperty(name);
4281	if (id < 0) {
4282	d->ensureExtraData();
4283
4284	const int idx = d->extraData->propertyNames.indexOf(t: name);
4285
4286	if (!value.isValid()) {
4287	if (idx == -1)
4288	return false;
4289	d->extraData->propertyNames.removeAt(i: idx);
4290	d->extraData->propertyValues.removeAt(i: idx);
4291	} else {
4292	if (idx == -1) {
4293	d->extraData->propertyNames.append(t: name);
4294	if (rvalue)
4295	d->extraData->propertyValues.append(t: std::move(*rvalue));
4296	else
4297	d->extraData->propertyValues.append(t: *lvalue);
4298	} else {
4299	if (value.userType() == d->extraData->propertyValues.at(i: idx).userType()
4300	&& value == d->extraData->propertyValues.at(i: idx))
4301	return false;
4302	if (rvalue)
4303	d->extraData->propertyValues[idx] = std::move(*rvalue);
4304	else
4305	d->extraData->propertyValues[idx] = *lvalue;
4306	}
4307	}
4308
4309	QDynamicPropertyChangeEvent ev(name);
4310	QCoreApplication::sendEvent(receiver: this, event: &ev);
4311
4312	return false;
4313	}
4314	QMetaProperty p = meta->property(index: id);
4315	#ifndef QT_NO_DEBUG
4316	if (!p.isWritable())
4317	qWarning(msg: "%s::setProperty: Property \"%s\" invalid,"
4318	" read-only or does not exist", metaObject()->className(), name);
4319	#endif
4320	return rvalue ? p.write(obj: this, value: std::move(*rvalue)) : p.write(obj: this, value: *lvalue);
4321	}
4322
4323	/*!
4324	Returns the value of the object's \a name property.
4325
4326	If no such property exists, the returned variant is invalid.
4327
4328	Information about all available properties is provided through the
4329	metaObject() and dynamicPropertyNames().
4330
4331	\sa setProperty(), QVariant::isValid(), metaObject(), dynamicPropertyNames()
4332	*/
4333	QVariant QObject::property(const char *name) const
4334	{
4335	Q_D(const QObject);
4336	const QMetaObject *meta = metaObject();
4337	if (!name || !meta)
4338	return QVariant();
4339
4340	int id = meta->indexOfProperty(name);
4341	if (id < 0) {
4342	if (!d->extraData)
4343	return QVariant();
4344	const int i = d->extraData->propertyNames.indexOf(t: name);
4345	return d->extraData->propertyValues.value(i);
4346	}
4347	QMetaProperty p = meta->property(index: id);
4348	#ifndef QT_NO_DEBUG
4349	if (!p.isReadable())
4350	qWarning(msg: "%s::property: Property \"%s\" invalid or does not exist",
4351	metaObject()->className(), name);
4352	#endif
4353	return p.read(obj: this);
4354	}
4355
4356	/*!
4357	\since 4.2
4358
4359	Returns the names of all properties that were dynamically added to
4360	the object using setProperty().
4361	*/
4362	QList<QByteArray> QObject::dynamicPropertyNames() const
4363	{
4364	Q_D(const QObject);
4365	if (d->extraData)
4366	return d->extraData->propertyNames;
4367	return QList<QByteArray>();
4368	}
4369
4370	/*****************************************************************************
4371	QObject debugging output routines.
4372	*****************************************************************************/
4373
4374	std::string QObjectPrivate::flagsForDumping() const
4375	{
4376	return {};
4377	}
4378
4379	static void dumpRecursive(int level, const QObject *object)
4380	{
4381	if (object) {
4382	const int indent = level * 4;
4383	qDebug(msg: "%*s%s::%ls %s", indent, "", object->metaObject()->className(),
4384	qUtf16Printable(object->objectName()),
4385	QObjectPrivate::get(o: object)->flagsForDumping().c_str());
4386	for (auto child : object->children())
4387	dumpRecursive(level: level + 1, object: child);
4388	}
4389	}
4390
4391
4392	/*!
4393	Dumps a tree of children to the debug output.
4394
4395	\note Before Qt 5.9, this function was not const.
4396
4397	\sa dumpObjectInfo()
4398	*/
4399
4400	void QObject::dumpObjectTree() const
4401	{
4402	dumpRecursive(level: 0, object: this);
4403	}
4404
4405	/*!
4406	Dumps information about signal connections, etc. for this object
4407	to the debug output.
4408
4409	\note Before Qt 5.9, this function was not const.
4410
4411	\sa dumpObjectTree()
4412	*/
4413
4414	void QObject::dumpObjectInfo() const
4415	{
4416	qDebug(msg: "OBJECT %s::%s", metaObject()->className(),
4417	objectName().isEmpty() ? "unnamed" : objectName().toLocal8Bit().data());
4418
4419	Q_D(const QObject);
4420	QMutexLocker locker(signalSlotLock(o: this));
4421
4422	// first, look for connections where this object is the sender
4423	qDebug(msg: " SIGNALS OUT");
4424
4425	QObjectPrivate::ConnectionData *cd = d->connections.loadRelaxed();
4426	if (cd && cd->signalVectorCount() > 0) {
4427	QObjectPrivate::SignalVector *signalVector = cd->signalVector.loadRelaxed();
4428	for (int signal_index = 0; signal_index < signalVector->count(); ++signal_index) {
4429	const QObjectPrivate::Connection *c = signalVector->at(i: signal_index).first.loadRelaxed();
4430	if (!c)
4431	continue;
4432	const QMetaMethod signal = QMetaObjectPrivate::signal(m: metaObject(), signal_index);
4433	qDebug(msg: " signal: %s", signal.methodSignature().constData());
4434
4435	// receivers
4436	while (c) {
4437	if (!c->receiver.loadRelaxed()) {
4438	qDebug(msg: " <Disconnected receiver>");
4439	c = c->nextConnectionList.loadRelaxed();
4440	continue;
4441	}
4442	if (c->isSlotObject) {
4443	qDebug(msg: " <functor or function pointer>");
4444	c = c->nextConnectionList.loadRelaxed();
4445	continue;
4446	}
4447	const QMetaObject *receiverMetaObject = c->receiver.loadRelaxed()->metaObject();
4448	const QMetaMethod method = receiverMetaObject->method(index: c->method());
4449	qDebug(msg: " --> %s::%s %s",
4450	receiverMetaObject->className(),
4451	c->receiver.loadRelaxed()->objectName().isEmpty() ? "unnamed" : qPrintable(c->receiver.loadRelaxed()->objectName()),
4452	method.methodSignature().constData());
4453	c = c->nextConnectionList.loadRelaxed();
4454	}
4455	}
4456	} else {
4457	qDebug( msg: " <None>" );
4458	}
4459
4460	// now look for connections where this object is the receiver
4461	qDebug(msg: " SIGNALS IN");
4462
4463	if (cd && cd->senders) {
4464	for (QObjectPrivate::Connection *s = cd->senders; s; s = s->next) {
4465	QByteArray slotName = QByteArrayLiteral("<unknown>");
4466	if (!s->isSlotObject) {
4467	const QMetaMethod slot = metaObject()->method(index: s->method());
4468	slotName = slot.methodSignature();
4469	}
4470	qDebug(msg: " <-- %s::%s %s",
4471	s->sender->metaObject()->className(),
4472	s->sender->objectName().isEmpty() ? "unnamed" : qPrintable(s->sender->objectName()),
4473	slotName.constData());
4474	}
4475	} else {
4476	qDebug(msg: " <None>");
4477	}
4478	}
4479
4480
4481	#ifndef QT_NO_DEBUG_STREAM
4482	void QObjectPrivate::writeToDebugStream(QDebug &dbg) const
4483	{
4484	Q_Q(const QObject);
4485	dbg.nospace() << q->metaObject()->className() << '(' << (const void *)q;
4486	if (!q->objectName().isEmpty())
4487	dbg << ", name = " << q->objectName();
4488	dbg << ')';
4489	}
4490
4491	QDebug operator<<(QDebug dbg, const QObject *o)
4492	{
4493	QDebugStateSaver saver(dbg);
4494	if (!o)
4495	return dbg << "QObject(0x0)";
4496
4497	const QObjectPrivate *d = QObjectPrivate::get(o);
4498	d->writeToDebugStream(dbg);
4499	return dbg;
4500	}
4501	#endif
4502
4503	/*!
4504	\macro Q_CLASSINFO(Name, Value)
4505	\relates QObject
4506
4507	This macro associates extra information to the class, which is available
4508	using QObject::metaObject(). The extra information takes the form of a
4509	\a Name string and a \a Value literal string.
4510
4511	Example:
4512
4513	\snippet code/src_corelib_kernel_qobject.cpp 35
4514
4515	Qt makes use of the macro in \l{Qt D-Bus} and \l{Qt Qml} modules.
4516	For instance, when defining \l{QML Object Types} in C++, you can
4517	designate a property as the \e default one:
4518
4519	\snippet code/doc_src_properties.cpp 7
4520
4521	\sa QMetaObject::classInfo()
4522	\sa {Using Qt D-Bus Adaptors}
4523	\sa {Defining QML Types from C++}
4524	*/
4525
4526	/*!
4527	\macro Q_INTERFACES(...)
4528	\relates QObject
4529
4530	This macro tells Qt which interfaces the class implements. This
4531	is used when implementing plugins.
4532
4533	\sa Q_DECLARE_INTERFACE(), Q_PLUGIN_METADATA(), {How to Create Qt Plugins}
4534	*/
4535
4536	/*!
4537	\macro Q_PROPERTY(...)
4538	\relates QObject
4539
4540	This macro is used for declaring properties in classes that
4541	inherit QObject. Properties behave like class data members, but
4542	they have additional features accessible through the \l
4543	{Meta-Object System}.
4544
4545	\snippet code/doc_src_properties.cpp 0
4546
4547	The property name and type and the \c READ function are required.
4548	The type can be any type supported by QVariant, or it can be a
4549	user-defined type. The other items are optional, but a \c WRITE
4550	function is common. The attributes default to true except \c USER,
4551	which defaults to false.
4552
4553	For example:
4554
4555	\snippet code/src_corelib_kernel_qobject.cpp 37
4556
4557	For more details about how to use this macro, and a more detailed
4558	example of its use, see the discussion on \l {Qt's Property System}.
4559
4560	\sa {Qt's Property System}
4561	*/
4562
4563	/*!
4564	\macro Q_ENUMS(...)
4565	\relates QObject
4566	\deprecated
4567
4568	In new code, you should prefer the use of the Q_ENUM() macro, which makes the
4569	type available also to the meta type system.
4570	For instance, QMetaEnum::fromType() will not work with types declared with Q_ENUMS().
4571
4572	This macro registers one or several enum types to the meta-object
4573	system.
4574
4575	If you want to register an enum that is declared in another class,
4576	the enum must be fully qualified with the name of the class
4577	defining it. In addition, the class \e defining the enum has to
4578	inherit QObject as well as declare the enum using Q_ENUMS().
4579
4580	\sa {Qt's Property System}
4581	*/
4582
4583	/*!
4584	\macro Q_FLAGS(...)
4585	\relates QObject
4586	\deprecated
4587
4588	This macro registers one or several \l{QFlags}{flags types} with the
4589	meta-object system. It is typically used in a class definition to declare
4590	that values of a given enum can be used as flags and combined using the
4591	bitwise OR operator.
4592
4593	\note This macro takes care of registering individual flag values
4594	with the meta-object system, so it is unnecessary to use Q_ENUMS()
4595	in addition to this macro.
4596
4597	In new code, you should prefer the use of the Q_FLAG() macro, which makes the
4598	type available also to the meta type system.
4599
4600	\sa {Qt's Property System}
4601	*/
4602
4603	/*!
4604	\macro Q_ENUM(...)
4605	\relates QObject
4606	\since 5.5
4607
4608	This macro registers an enum type with the meta-object system.
4609	It must be placed after the enum declaration in a class that has the Q_OBJECT,
4610	Q_GADGET or Q_GADGET_EXPORT macro. For namespaces use \l Q_ENUM_NS() instead.
4611
4612	For example:
4613
4614	\snippet code/src_corelib_kernel_qobject.cpp 38
4615
4616	Enumerations that are declared with Q_ENUM have their QMetaEnum registered in the
4617	enclosing QMetaObject. You can also use QMetaEnum::fromType() to get the QMetaEnum.
4618
4619	Registered enumerations are automatically registered also to the Qt meta
4620	type system, making them known to QMetaType without the need to use
4621	Q_DECLARE_METATYPE(). This will enable useful features; for example, if used
4622	in a QVariant, you can convert them to strings. Likewise, passing them to
4623	QDebug will print out their names.
4624
4625	Mind that the enum values are stored as signed \c int in the meta object system.
4626	Registering enumerations with values outside the range of values valid for \c int
4627	will lead to overflows and potentially undefined behavior when accessing them through
4628	the meta object system. QML, for example, does access registered enumerations through
4629	the meta object system.
4630
4631	\sa {Qt's Property System}
4632	*/
4633
4634
4635	/*!
4636	\macro Q_FLAG(...)
4637	\relates QObject
4638	\since 5.5
4639
4640	This macro registers a single \l{QFlags}{flags type} with the
4641	meta-object system. It is typically used in a class definition to declare
4642	that values of a given enum can be used as flags and combined using the
4643	bitwise OR operator. For namespaces use \l Q_FLAG_NS() instead.
4644
4645	The macro must be placed after the enum declaration. The declaration of
4646	the flags type is done using the \l Q_DECLARE_FLAGS() macro.
4647
4648	For example, in QItemSelectionModel, the
4649	\l{QItemSelectionModel::SelectionFlags}{SelectionFlags} flag is
4650	declared in the following way:
4651
4652	\snippet code/src_corelib_kernel_qobject.cpp 39
4653
4654	\note The Q_FLAG macro takes care of registering individual flag values
4655	with the meta-object system, so it is unnecessary to use Q_ENUM()
4656	in addition to this macro.
4657
4658	\sa {Qt's Property System}
4659	*/
4660
4661	/*!
4662	\macro Q_ENUM_NS(...)
4663	\relates QObject
4664	\since 5.8
4665
4666	This macro registers an enum type with the meta-object system.
4667	It must be placed after the enum declaration in a namespace that
4668	has the Q_NAMESPACE macro. It is the same as \l Q_ENUM but in a
4669	namespace.
4670
4671	Enumerations that are declared with Q_ENUM_NS have their QMetaEnum
4672	registered in the enclosing QMetaObject. You can also use
4673	QMetaEnum::fromType() to get the QMetaEnum.
4674
4675	Registered enumerations are automatically registered also to the Qt meta
4676	type system, making them known to QMetaType without the need to use
4677	Q_DECLARE_METATYPE(). This will enable useful features; for example, if
4678	used in a QVariant, you can convert them to strings. Likewise, passing them
4679	to QDebug will print out their names.
4680
4681	Mind that the enum values are stored as signed \c int in the meta object system.
4682	Registering enumerations with values outside the range of values valid for \c int
4683	will lead to overflows and potentially undefined behavior when accessing them through
4684	the meta object system. QML, for example, does access registered enumerations through
4685	the meta object system.
4686
4687	\sa {Qt's Property System}
4688	*/
4689
4690
4691	/*!
4692	\macro Q_FLAG_NS(...)
4693	\relates QObject
4694	\since 5.8
4695
4696	This macro registers a single \l{QFlags}{flags type} with the
4697	meta-object system. It is used in a namespace that has the
4698	Q_NAMESPACE macro, to declare that values of a given enum can be
4699	used as flags and combined using the bitwise OR operator.
4700	It is the same as \l Q_FLAG but in a namespace.
4701
4702	The macro must be placed after the enum declaration.
4703
4704	\note The Q_FLAG_NS macro takes care of registering individual flag
4705	values with the meta-object system, so it is unnecessary to use
4706	Q_ENUM_NS() in addition to this macro.
4707
4708	\sa {Qt's Property System}
4709	*/
4710
4711	/*!
4712	\macro Q_OBJECT
4713	\relates QObject
4714
4715	The Q_OBJECT macro is used to enable meta-object features, such as dynamic
4716	properties, signals, and slots.
4717
4718	You can add the Q_OBJECT macro to any section of a class definition that
4719	declares its own signals and slots or that uses other services provided by
4720	Qt's meta-object system.
4721
4722	//! [qobject-macros-private-access-specifier]
4723	\note This macro expansion ends with a \c private: access specifier. If you
4724	declare members immediately after this macro, those members will also be
4725	private. To add public (or protected) members right after the macro, use a
4726	\c {public:} (or \c {protected:}) access specifier.
4727	//! [qobject-macros-private-access-specifier]
4728
4729	Example:
4730
4731	\snippet signalsandslots/signalsandslots.h 1
4732	\codeline
4733	\snippet signalsandslots/signalsandslots.h 2
4734	\snippet signalsandslots/signalsandslots.h 3
4735
4736	\note This macro requires the class to be a subclass of QObject. Use
4737	Q_GADGET or Q_GADGET_EXPORT instead of Q_OBJECT to enable the meta object
4738	system's support for enums in a class that is not a QObject subclass.
4739
4740	\sa {Meta-Object System}, {Signals and Slots}, {Qt's Property System}
4741	*/
4742
4743	/*!
4744	\macro Q_GADGET
4745	\relates QObject
4746
4747	The Q_GADGET macro is a lighter version of the Q_OBJECT macro for classes
4748	that do not inherit from QObject but still want to use some of the
4749	reflection capabilities offered by QMetaObject.
4750
4751	\include qobject.cpp qobject-macros-private-access-specifier
4752
4753	Q_GADGETs can have Q_ENUM, Q_PROPERTY and Q_INVOKABLE, but they cannot have
4754	signals or slots.
4755
4756	Q_GADGET makes a class member, \c{staticMetaObject}, available.
4757	\c{staticMetaObject} is of type QMetaObject and provides access to the
4758	enums declared with Q_ENUM.
4759
4760	\sa Q_GADGET_EXPORT
4761	*/
4762
4763	/*!
4764	\macro Q_GADGET_EXPORT(EXPORT_MACRO)
4765	\relates QObject
4766	\since 6.3
4767
4768	The Q_GADGET_EXPORT macro works exactly like the Q_GADGET macro.
4769	However, the \c{staticMetaObject} variable that is made available (see
4770	Q_GADGET) is declared with the supplied \a EXPORT_MACRO qualifier. This is
4771	useful if the object needs to be exported from a dynamic library, but the
4772	enclosing class as a whole should not be (e.g. because it consists of mostly
4773	inline functions).
4774
4775	\include qobject.cpp qobject-macros-private-access-specifier
4776
4777	For example:
4778
4779	\code
4780	class Point {
4781	Q_GADGET_EXPORT(EXPORT_MACRO)
4782	Q_PROPERTY(int x MEMBER x)
4783	Q_PROPERTY(int y MEMBER y)
4784	~~~
4785	\endcode
4786
4787	\sa Q_GADGET, {Creating Shared Libraries}
4788	*/
4789
4790	/*!
4791	\macro Q_NAMESPACE
4792	\relates QObject
4793	\since 5.8
4794
4795	The Q_NAMESPACE macro can be used to add QMetaObject capabilities
4796	to a namespace.
4797
4798	Q_NAMESPACEs can have Q_CLASSINFO, Q_ENUM_NS, Q_FLAG_NS, but they
4799	cannot have Q_ENUM, Q_FLAG, Q_PROPERTY, Q_INVOKABLE, signals nor slots.
4800
4801	Q_NAMESPACE makes an external variable, \c{staticMetaObject}, available.
4802	\c{staticMetaObject} is of type QMetaObject and provides access to the
4803	enums declared with Q_ENUM_NS/Q_FLAG_NS.
4804
4805	For example:
4806
4807	\code
4808	namespace test {
4809	Q_NAMESPACE
4810	...
4811	\endcode
4812
4813	\sa Q_NAMESPACE_EXPORT
4814	*/
4815
4816	/*!
4817	\macro Q_NAMESPACE_EXPORT(EXPORT_MACRO)
4818	\relates QObject
4819	\since 5.14
4820
4821	The Q_NAMESPACE_EXPORT macro can be used to add QMetaObject capabilities
4822	to a namespace.
4823
4824	It works exactly like the Q_NAMESPACE macro. However, the external
4825	\c{staticMetaObject} variable that gets defined in the namespace
4826	is declared with the supplied \a EXPORT_MACRO qualifier. This is
4827	useful if the object needs to be exported from a dynamic library.
4828
4829	For example:
4830
4831	\code
4832	namespace test {
4833	Q_NAMESPACE_EXPORT(EXPORT_MACRO)
4834	...
4835	\endcode
4836
4837	\sa Q_NAMESPACE, {Creating Shared Libraries}
4838	*/
4839
4840	/*!
4841	\macro Q_MOC_INCLUDE
4842	\relates QObject
4843	\since 6.0
4844
4845	The Q_MOC_INCLUDE macro can be used within or outside a class, and tell the
4846	\l{moc}{Meta Object Compiler} to add an include.
4847
4848	\code
4849	// Put this in your code and the generated code will include this header.
4850	Q_MOC_INCLUDE("myheader.h")
4851	\endcode
4852
4853	This is useful if the types you use as properties or signal/slots arguments
4854	are forward declared.
4855	*/
4856
4857	/*!
4858	\macro Q_SIGNALS
4859	\relates QObject
4860
4861	Use this macro to replace the \c signals keyword in class
4862	declarations, when you want to use Qt Signals and Slots with a
4863	\l{3rd Party Signals and Slots} {3rd party signal/slot mechanism}.
4864
4865	The macro is normally used when \c no_keywords is specified with
4866	the \c CONFIG variable in the \c .pro file, but it can be used
4867	even when \c no_keywords is \e not specified.
4868	*/
4869
4870	/*!
4871	\macro Q_SIGNAL
4872	\relates QObject
4873
4874	This is an additional macro that allows you to mark a single
4875	function as a signal. It can be quite useful, especially when you
4876	use a 3rd-party source code parser which doesn't understand a \c
4877	signals or \c Q_SIGNALS groups.
4878
4879	Use this macro to replace the \c signals keyword in class
4880	declarations, when you want to use Qt Signals and Slots with a
4881	\l{3rd Party Signals and Slots} {3rd party signal/slot mechanism}.
4882
4883	The macro is normally used when \c no_keywords is specified with
4884	the \c CONFIG variable in the \c .pro file, but it can be used
4885	even when \c no_keywords is \e not specified.
4886	*/
4887
4888	/*!
4889	\macro Q_SLOTS
4890	\relates QObject
4891
4892	Use this macro to replace the \c slots keyword in class
4893	declarations, when you want to use Qt Signals and Slots with a
4894	\l{3rd Party Signals and Slots} {3rd party signal/slot mechanism}.
4895
4896	The macro is normally used when \c no_keywords is specified with
4897	the \c CONFIG variable in the \c .pro file, but it can be used
4898	even when \c no_keywords is \e not specified.
4899	*/
4900
4901	/*!
4902	\macro Q_SLOT
4903	\relates QObject
4904
4905	This is an additional macro that allows you to mark a single
4906	function as a slot. It can be quite useful, especially when you
4907	use a 3rd-party source code parser which doesn't understand a \c
4908	slots or \c Q_SLOTS groups.
4909
4910	Use this macro to replace the \c slots keyword in class
4911	declarations, when you want to use Qt Signals and Slots with a
4912	\l{3rd Party Signals and Slots} {3rd party signal/slot mechanism}.
4913
4914	The macro is normally used when \c no_keywords is specified with
4915	the \c CONFIG variable in the \c .pro file, but it can be used
4916	even when \c no_keywords is \e not specified.
4917	*/
4918
4919	/*!
4920	\macro Q_EMIT
4921	\relates QObject
4922
4923	Use this macro to replace the \c emit keyword for emitting
4924	signals, when you want to use Qt Signals and Slots with a
4925	\l{3rd Party Signals and Slots} {3rd party signal/slot mechanism}.
4926
4927	The macro is normally used when \c no_keywords is specified with
4928	the \c CONFIG variable in the \c .pro file, but it can be used
4929	even when \c no_keywords is \e not specified.
4930	*/
4931
4932	/*!
4933	\macro Q_INVOKABLE
4934	\relates QObject
4935
4936	Apply this macro to declarations of member functions to allow them to
4937	be invoked via the meta-object system. The macro is written before
4938	the return type, as shown in the following example:
4939
4940	\snippet qmetaobject-invokable/window.h Window class with invokable method
4941
4942	The \c invokableMethod() function is marked up using Q_INVOKABLE, causing
4943	it to be registered with the meta-object system and enabling it to be
4944	invoked using QMetaObject::invokeMethod().
4945	Since \c normalMethod() function is not registered in this way, it cannot
4946	be invoked using QMetaObject::invokeMethod().
4947
4948	If an invokable member function returns a pointer to a QObject or a
4949	subclass of QObject and it is invoked from QML, special ownership rules
4950	apply. See \l{qtqml-cppintegration-data.html}{Data Type Conversion Between QML and C++}
4951	for more information.
4952	*/
4953
4954	/*!
4955	\macro Q_REVISION
4956	\relates QObject
4957
4958	Apply this macro to declarations of member functions to tag them with a
4959	revision number in the meta-object system. The macro is written before
4960	the return type, as shown in the following example:
4961
4962	\snippet qmetaobject-revision/window.h Window class with revision
4963
4964	This is useful when using the meta-object system to dynamically expose
4965	objects to another API, as you can match the version expected by multiple
4966	versions of the other API. Consider the following simplified example:
4967
4968	\snippet qmetaobject-revision/main.cpp Window class using revision
4969
4970	Using the same Window class as the previous example, the newProperty and
4971	newMethod would only be exposed in this code when the expected version is
4972	\c{2.1} or greater.
4973
4974	Since all methods are considered to be in revision \c{0} if untagged, a tag
4975	of \c{Q_REVISION(0)} or \c{Q_REVISION(0, 0)} is invalid and ignored.
4976
4977	You can pass one or two integer parameters to \c{Q_REVISION}. If you pass
4978	one parameter, it denotes the minor version only. This means that the major
4979	version is unspecified. If you pass two, the first parameter is the major
4980	version and the second parameter is the minor version.
4981
4982	This tag is not used by the meta-object system itself. Currently this is only
4983	used by the QtQml module.
4984
4985	For a more generic string tag, see \l QMetaMethod::tag()
4986
4987	\sa QMetaMethod::revision()
4988	*/
4989
4990	/*!
4991	\macro Q_SET_OBJECT_NAME(Object)
4992	\relates QObject
4993	\since 5.0
4994
4995	This macro assigns \a Object the objectName "Object".
4996
4997	It doesn't matter whether \a Object is a pointer or not, the
4998	macro figures that out by itself.
4999
5000	\sa QObject::objectName()
5001	*/
5002
5003	/*!
5004	\macro QT_NO_NARROWING_CONVERSIONS_IN_CONNECT
5005	\relates QObject
5006	\since 5.8
5007
5008	Defining this macro will disable narrowing and floating-point-to-integral
5009	conversions between the arguments carried by a signal and the arguments
5010	accepted by a slot, when the signal and the slot are connected using the
5011	PMF-based syntax.
5012
5013	\sa QObject::connect
5014	*/
5015
5016	/*!
5017	\macro QT_NO_CONTEXTLESS_CONNECT
5018	\relates QObject
5019	\since 6.7
5020
5021	Defining this macro will disable the overload of QObject::connect() that
5022	connects a signal to a functor, without also specifying a QObject
5023	as a receiver/context object (that is, the 3-arguments overload
5024	of QObject::connect()).
5025
5026	Using the context-less overload is error prone, because it is easy
5027	to connect to functors that depend on some local state of the
5028	receiving end. If such local state gets destroyed, the connection
5029	does not get automatically disconnected.
5030
5031	Moreover, such connections are always direct connections, which may
5032	cause issues in multithreaded scenarios (for instance, if the
5033	signal is emitted from another thread).
5034
5035	\sa QObject::connect, Qt::ConnectionType
5036	*/
5037
5038	/*!
5039	\typedef QObjectList
5040	\relates QObject
5041
5042	Synonym for QList<QObject *>.
5043	*/
5044
5045	/*!
5046	\fn template<typename PointerToMemberFunction> QMetaObject::Connection QObject::connect(const QObject *sender, PointerToMemberFunction signal, const QObject *receiver, PointerToMemberFunction method, Qt::ConnectionType type)
5047	\overload connect()
5048	\threadsafe
5049
5050	Creates a connection of the given \a type from the \a signal in
5051	the \a sender object to the \a method in the \a receiver object.
5052	Returns a handle to the connection that can be used to disconnect
5053	it later.
5054
5055	The signal must be a function declared as a signal in the header.
5056	The slot function can be any member function that can be connected
5057	to the signal.
5058	A slot can be connected to a given signal if the signal has at
5059	least as many arguments as the slot, and there is an implicit
5060	conversion between the types of the corresponding arguments in the
5061	signal and the slot.
5062
5063	Example:
5064
5065	\snippet code/src_corelib_kernel_qobject.cpp 44
5066
5067	This example ensures that the label always displays the current
5068	line edit text.
5069
5070	A signal can be connected to many slots and signals. Many signals
5071	can be connected to one slot.
5072
5073	If a signal is connected to several slots, the slots are activated
5074	in the same order as the order the connection was made, when the
5075	signal is emitted
5076
5077	The function returns an handle to a connection if it successfully
5078	connects the signal to the slot. The Connection handle will be invalid
5079	if it cannot create the connection, for example, if QObject is unable
5080	to verify the existence of \a signal (if it was not declared as a signal)
5081	You can check if the QMetaObject::Connection is valid by casting it to a bool.
5082
5083	By default, a signal is emitted for every connection you make;
5084	two signals are emitted for duplicate connections. You can break
5085	all of these connections with a single disconnect() call.
5086	If you pass the Qt::UniqueConnection \a type, the connection will only
5087	be made if it is not a duplicate. If there is already a duplicate
5088	(exact same signal to the exact same slot on the same objects),
5089	the connection will fail and connect will return an invalid QMetaObject::Connection.
5090
5091	The optional \a type parameter describes the type of connection
5092	to establish. In particular, it determines whether a particular
5093	signal is delivered to a slot immediately or queued for delivery
5094	at a later time. If the signal is queued, the parameters must be
5095	of types that are known to Qt's meta-object system, because Qt
5096	needs to copy the arguments to store them in an event behind the
5097	scenes. If you try to use a queued connection and get the error
5098	message
5099
5100	\snippet code/src_corelib_kernel_qobject.cpp 25
5101
5102	make sure to declare the argument type with Q_DECLARE_METATYPE
5103
5104	Overloaded functions can be resolved with help of \l qOverload.
5105
5106	\sa {Differences between String-Based and Functor-Based Connections}
5107	*/
5108
5109	/*!
5110	\fn template<typename PointerToMemberFunction, typename Functor> QMetaObject::Connection QObject::connect(const QObject *sender, PointerToMemberFunction signal, Functor functor)
5111
5112	\threadsafe
5113	\overload connect()
5114
5115	Creates a connection from \a signal in
5116	\a sender object to \a functor, and returns a handle to the connection
5117
5118	The signal must be a function declared as a signal in the header.
5119	The slot function can be any function or functor that can be connected
5120	to the signal.
5121	A slot function can be connected to a given signal if the signal has at
5122	least as many arguments as the slot function. There must exist implicit
5123	conversion between the types of the corresponding arguments in the
5124	signal and the slot.
5125
5126	Example:
5127
5128	\snippet code/src_corelib_kernel_qobject.cpp 45
5129
5130	Lambda expressions can also be used:
5131
5132	\snippet code/src_corelib_kernel_qobject.cpp 46
5133
5134	The connection will automatically disconnect if the sender is destroyed.
5135	However, you should take care that any objects used within the functor
5136	are still alive when the signal is emitted.
5137
5138	For this reason, it is recommended to use the overload of connect()
5139	that also takes a QObject as a receiver/context. It is possible
5140	to disable the usage of the context-less overload by defining the
5141	\c{QT_NO_CONTEXTLESS_CONNECT} macro.
5142
5143	Overloaded functions can be resolved with help of \l qOverload.
5144
5145	*/
5146
5147	/*!
5148	\fn template<typename PointerToMemberFunction, typename Functor> QMetaObject::Connection QObject::connect(const QObject *sender, PointerToMemberFunction signal, const QObject *context, Functor functor, Qt::ConnectionType type)
5149
5150	\threadsafe
5151	\overload connect()
5152
5153	\since 5.2
5154
5155	Creates a connection of a given \a type from \a signal in
5156	\a sender object to \a functor to be placed in a specific event
5157	loop of \a context, and returns a handle to the connection.
5158
5159	\note Qt::UniqueConnections do not work for lambdas, non-member functions
5160	and functors; they only apply to connecting to member functions.
5161
5162	The signal must be a function declared as a signal in the header.
5163	The slot function can be any function or functor that can be connected
5164	to the signal.
5165	A slot function can be connected to a given signal if the signal has at
5166	least as many arguments as the slot function. There must exist implicit
5167	conversion between the types of the corresponding arguments in the
5168	signal and the slot.
5169
5170	Example:
5171
5172	\snippet code/src_corelib_kernel_qobject.cpp 50
5173
5174	Lambda expressions can also be used:
5175
5176	\snippet code/src_corelib_kernel_qobject.cpp 51
5177
5178	The connection will automatically disconnect if the sender or the context
5179	is destroyed.
5180	However, you should take care that any objects used within the functor
5181	are still alive when the signal is emitted.
5182
5183	Overloaded functions can be resolved with help of \l qOverload.
5184	*/
5185
5186	/*!
5187	\internal
5188
5189	Implementation of the template version of connect
5190
5191	\a sender is the sender object
5192	\a signal is a pointer to a pointer to a member signal of the sender
5193	\a receiver is the receiver object, may not be \nullptr, will be equal to sender when
5194	connecting to a static function or a functor
5195	\a slot a pointer only used when using Qt::UniqueConnection
5196	\a type the Qt::ConnectionType passed as argument to connect
5197	\a types an array of integer with the metatype id of the parameter of the signal
5198	to be used with queued connection
5199	must stay valid at least for the whole time of the connection, this function
5200	do not take ownership. typically static data.
5201	If \nullptr, then the types will be computed when the signal is emit in a queued
5202	connection from the types from the signature.
5203	\a senderMetaObject is the metaobject used to lookup the signal, the signal must be in
5204	this metaobject
5205	*/
5206	QMetaObject::Connection QObject::connectImpl(const QObject *sender, void **signal,
5207	const QObject *receiver, void **slot,
5208	QtPrivate::QSlotObjectBase *slotObjRaw, Qt::ConnectionType type,
5209	const int *types, const QMetaObject *senderMetaObject)
5210	{
5211	QtPrivate::SlotObjUniquePtr slotObj(slotObjRaw);
5212	if (!signal) {
5213	qCWarning(lcConnect, "QObject::connect: invalid nullptr parameter");
5214	return QMetaObject::Connection();
5215	}
5216
5217	int signal_index = -1;
5218	void *args[] = { &signal_index, signal };
5219	for (; senderMetaObject && signal_index < 0; senderMetaObject = senderMetaObject->superClass()) {
5220	senderMetaObject->static_metacall(QMetaObject::IndexOfMethod, 0, args);
5221	if (signal_index >= 0 && signal_index < QMetaObjectPrivate::get(metaobject: senderMetaObject)->signalCount)
5222	break;
5223	}
5224	if (!senderMetaObject) {
5225	qCWarning(lcConnect, "QObject::connect: signal not found in %s", sender->metaObject()->className());
5226	return QMetaObject::Connection(nullptr);
5227	}
5228	signal_index += QMetaObjectPrivate::signalOffset(m: senderMetaObject);
5229	return QObjectPrivate::connectImpl(sender, signal_index, receiver, slot, slotObj: slotObj.release(), type, types, senderMetaObject);
5230	}
5231
5232	static void connectWarning(const QObject *sender,
5233	const QMetaObject *senderMetaObject,
5234	const QObject *receiver,
5235	const char *message)
5236	{
5237	const char *senderString = sender ? sender->metaObject()->className()
5238	: senderMetaObject ? senderMetaObject->className()
5239	: "Unknown";
5240	const char *receiverString = receiver ? receiver->metaObject()->className()
5241	: "Unknown";
5242	qCWarning(lcConnect, "QObject::connect(%s, %s): %s", senderString, receiverString, message);
5243	}
5244
5245	/*!
5246	\internal
5247
5248	Internal version of connect used by the template version of QObject::connect (called via connectImpl) and
5249	also used by the QObjectPrivate::connect version used by QML. The signal_index is expected to be relative
5250	to the number of signals.
5251	*/
5252	QMetaObject::Connection QObjectPrivate::connectImpl(const QObject *sender, int signal_index,
5253	const QObject *receiver, void **slot,
5254	QtPrivate::QSlotObjectBase *slotObjRaw, int type,
5255	const int *types, const QMetaObject *senderMetaObject)
5256	{
5257	QtPrivate::SlotObjUniquePtr slotObj(slotObjRaw);
5258
5259	if (!sender || !receiver || !slotObj || !senderMetaObject) {
5260	connectWarning(sender, senderMetaObject, receiver, message: "invalid nullptr parameter");
5261	return QMetaObject::Connection();
5262	}
5263
5264	if (type & Qt::UniqueConnection && !slot) {
5265	connectWarning(sender, senderMetaObject, receiver, message: "unique connections require a pointer to member function of a QObject subclass");
5266	return QMetaObject::Connection();
5267	}
5268
5269	QObject *s = const_cast<QObject *>(sender);
5270	QObject *r = const_cast<QObject *>(receiver);
5271
5272	QOrderedMutexLocker locker(signalSlotLock(o: sender),
5273	signalSlotLock(o: receiver));
5274
5275	if (type & Qt::UniqueConnection && slot) {
5276	QObjectPrivate::ConnectionData *connections = QObjectPrivate::get(o: s)->connections.loadRelaxed();
5277	if (connections && connections->signalVectorCount() > signal_index) {
5278	const QObjectPrivate::Connection *c2 = connections->signalVector.loadRelaxed()->at(i: signal_index).first.loadRelaxed();
5279
5280	while (c2) {
5281	if (c2->receiver.loadRelaxed() == receiver && c2->isSlotObject && c2->slotObj->compare(a: slot))
5282	return QMetaObject::Connection();
5283	c2 = c2->nextConnectionList.loadRelaxed();
5284	}
5285	}
5286	}
5287	type &= ~Qt::UniqueConnection;
5288
5289	const bool isSingleShot = type & Qt::SingleShotConnection;
5290	type &= ~Qt::SingleShotConnection;
5291
5292	Q_ASSERT(type >= 0);
5293	Q_ASSERT(type <= 3);
5294
5295	std::unique_ptr<QObjectPrivate::Connection> c{new QObjectPrivate::Connection};
5296	c->sender = s;
5297	c->signal_index = signal_index;
5298	QThreadData *td = r->d_func()->threadData.loadAcquire();
5299	td->ref();
5300	c->receiverThreadData.storeRelaxed(newValue: td);
5301	c->receiver.storeRelaxed(newValue: r);
5302	c->connectionType = type;
5303	c->isSlotObject = true;
5304	c->slotObj = slotObj.release();
5305	if (types) {
5306	c->argumentTypes.storeRelaxed(newValue: types);
5307	c->ownArgumentTypes = false;
5308	}
5309	c->isSingleShot = isSingleShot;
5310
5311	QObjectPrivate::get(o: s)->addConnection(signal: signal_index, c: c.get());
5312	QMetaObject::Connection ret(c.release());
5313	locker.unlock();
5314
5315	QMetaMethod method = QMetaObjectPrivate::signal(m: senderMetaObject, signal_index);
5316	Q_ASSERT(method.isValid());
5317	s->connectNotify(signal: method);
5318
5319	return ret;
5320	}
5321
5322	/*!
5323	Disconnect a connection.
5324
5325	If the \a connection is invalid or has already been disconnected, do nothing
5326	and return false.
5327
5328	\sa connect()
5329	*/
5330	bool QObject::disconnect(const QMetaObject::Connection &connection)
5331	{
5332	QObjectPrivate::Connection *c = static_cast<QObjectPrivate::Connection *>(connection.d_ptr);
5333	if (!c)
5334	return false;
5335	const bool disconnected = QObjectPrivate::removeConnection(c);
5336	const_cast<QMetaObject::Connection &>(connection).d_ptr = nullptr;
5337	c->deref(); // has been removed from the QMetaObject::Connection object
5338	return disconnected;
5339	}
5340
5341	/*! \fn template<typename PointerToMemberFunction> bool QObject::disconnect(const QObject *sender, PointerToMemberFunction signal, const QObject *receiver, PointerToMemberFunction method)
5342	\overload disconnect()
5343	\threadsafe
5344
5345	Disconnects \a signal in object \a sender from \a method in object
5346	\a receiver. Returns \c true if the connection is successfully broken;
5347	otherwise returns \c false.
5348
5349	A signal-slot connection is removed when either of the objects
5350	involved are destroyed.
5351
5352	disconnect() is typically used in three ways, as the following
5353	examples demonstrate.
5354	\list 1
5355	\li Disconnect everything connected to an object's signals:
5356
5357	\snippet code/src_corelib_kernel_qobject.cpp 26
5358
5359	\li Disconnect everything connected to a specific signal:
5360
5361	\snippet code/src_corelib_kernel_qobject.cpp 47
5362
5363	\li Disconnect a specific receiver:
5364
5365	\snippet code/src_corelib_kernel_qobject.cpp 30
5366
5367	\li Disconnect a connection from one specific signal to a specific slot:
5368
5369	\snippet code/src_corelib_kernel_qobject.cpp 48
5370
5371
5372	\endlist
5373
5374	\nullptr may be used as a wildcard, meaning "any signal", "any receiving
5375	object", or "any slot in the receiving object", respectively.
5376
5377	The \a sender may never be \nullptr. (You cannot disconnect signals
5378	from more than one object in a single call.)
5379
5380	If \a signal is \nullptr, it disconnects \a receiver and \a method from
5381	any signal. If not, only the specified signal is disconnected.
5382
5383	If \a receiver is \nullptr, it disconnects anything connected to \a
5384	signal. If not, only slots in the specified receiver are disconnected.
5385	disconnect() with a non-null \a receiver also disconnects slot functions
5386	that were connected with \a receiver as their context object.
5387
5388	If \a method is \nullptr, it disconnects anything that is connected to \a
5389	receiver. If not, only slots named \a method will be disconnected,
5390	and all other slots are left alone. The \a method must be \nullptr
5391	if \a receiver is left out, so you cannot disconnect a
5392	specifically-named slot on all objects.
5393
5394	\note It is not possible to use this overload to disconnect signals
5395	connected to functors or lambda expressions. That is because it is not
5396	possible to compare them. Instead, use the overload that takes a
5397	QMetaObject::Connection.
5398
5399	\note Unless \a method is \nullptr, this function will also not break
5400	connections that were made using the string-based version of connect(). To
5401	break such connections, use the corresponding string-based overload of
5402	disconnect().
5403
5404	\sa connect()
5405	*/
5406
5407	bool QObject::disconnectImpl(const QObject *sender, void **signal, const QObject *receiver, void **slot, const QMetaObject *senderMetaObject)
5408	{
5409	if (sender == nullptr || (receiver == nullptr && slot != nullptr)) {
5410	qCWarning(lcConnect, "QObject::disconnect: Unexpected nullptr parameter");
5411	return false;
5412	}
5413
5414	int signal_index = -1;
5415	if (signal) {
5416	void *args[] = { &signal_index, signal };
5417	for (; senderMetaObject && signal_index < 0; senderMetaObject = senderMetaObject->superClass()) {
5418	senderMetaObject->static_metacall(QMetaObject::IndexOfMethod, 0, args);
5419	if (signal_index >= 0 && signal_index < QMetaObjectPrivate::get(metaobject: senderMetaObject)->signalCount)
5420	break;
5421	}
5422	if (!senderMetaObject) {
5423	qCWarning(lcConnect, "QObject::disconnect: signal not found in %s", sender->metaObject()->className());
5424	return false;
5425	}
5426	signal_index += QMetaObjectPrivate::signalOffset(m: senderMetaObject);
5427	}
5428
5429	return QMetaObjectPrivate::disconnect(sender, signal_index, smeta: senderMetaObject, receiver, method_index: -1, slot);
5430	}
5431
5432	/*!
5433	\internal
5434	Used by QML to connect a signal by index to a slot implemented in JavaScript
5435	(wrapped in a custom QSlotObjectBase subclass).
5436
5437	This version of connect assumes that sender and receiver are the same object.
5438
5439	The signal_index is an index relative to the number of methods.
5440	*/
5441	QMetaObject::Connection QObjectPrivate::connect(const QObject *sender, int signal_index, QtPrivate::QSlotObjectBase *slotObj, Qt::ConnectionType type)
5442	{
5443	return QObjectPrivate::connect(sender, signal_index, receiver: sender, slotObj, type);
5444	}
5445
5446	/*!
5447	\internal
5448	Used by QML to connect a signal by index to a slot implemented in JavaScript
5449	(wrapped in a custom QSlotObjectBase subclass).
5450
5451	This is an overload that should be used when \a sender and \a receiver are
5452	different objects.
5453
5454	The signal_index is an index relative to the number of methods.
5455	*/
5456	QMetaObject::Connection QObjectPrivate::connect(const QObject *sender, int signal_index,
5457	const QObject *receiver,
5458	QtPrivate::QSlotObjectBase *slotObjRaw,
5459	Qt::ConnectionType type)
5460	{
5461	QtPrivate::SlotObjUniquePtr slotObj(slotObjRaw);
5462	if (!sender) {
5463	qCWarning(lcConnect, "QObject::connect: invalid nullptr parameter");
5464	return QMetaObject::Connection();
5465	}
5466	const QMetaObject *senderMetaObject = sender->metaObject();
5467	signal_index = methodIndexToSignalIndex(base: &senderMetaObject, signal_index);
5468
5469	return connectImpl(sender, signal_index, receiver, /*slot*/ nullptr, slotObjRaw: slotObj.release(),
5470	type, /*types*/ nullptr, senderMetaObject);
5471	}
5472
5473	/*!
5474	\internal
5475	Used by QML to disconnect a signal by index that's connected to a slot implemented in JavaScript (wrapped in a custom QSlotObjectBase subclass)
5476	In the QML case the slot is not a pointer to a pointer to the function to disconnect, but instead it is a pointer to an array of internal values
5477	required for the disconnect.
5478
5479	This version of disconnect assumes that sender and receiver are the same object.
5480	*/
5481	bool QObjectPrivate::disconnect(const QObject *sender, int signal_index, void **slot)
5482	{
5483	return QObjectPrivate::disconnect(sender, signal_index, receiver: sender, slot);
5484	}
5485
5486	/*!
5487	\internal
5488
5489	Used by QML to disconnect a signal by index that's connected to a slot
5490	implemented in JavaScript (wrapped in a custom QSlotObjectBase subclass) In the
5491	QML case the slot is not a pointer to a pointer to the function to disconnect,
5492	but instead it is a pointer to an array of internal values required for the
5493	disconnect.
5494
5495	This is an overload that should be used when \a sender and \a receiver are
5496	different objects.
5497	*/
5498	bool QObjectPrivate::disconnect(const QObject *sender, int signal_index, const QObject *receiver,
5499	void **slot)
5500	{
5501	const QMetaObject *senderMetaObject = sender->metaObject();
5502	signal_index = methodIndexToSignalIndex(base: &senderMetaObject, signal_index);
5503
5504	return QMetaObjectPrivate::disconnect(sender, signal_index, smeta: senderMetaObject, receiver, method_index: -1,
5505	slot);
5506	}
5507
5508	/*!
5509	\internal
5510	\threadsafe
5511	*/
5512	inline bool QObjectPrivate::removeConnection(QObjectPrivate::Connection *c)
5513	{
5514	if (!c)
5515	return false;
5516	QObject *receiver = c->receiver.loadRelaxed();
5517	if (!receiver)
5518	return false;
5519
5520	QBasicMutex *senderMutex = signalSlotLock(o: c->sender);
5521	QBasicMutex *receiverMutex = signalSlotLock(o: receiver);
5522
5523	QObjectPrivate::ConnectionData *connections;
5524	{
5525	QOrderedMutexLocker locker(senderMutex, receiverMutex);
5526
5527	// load receiver once again and recheck to ensure nobody else has removed the connection in the meantime
5528	receiver = c->receiver.loadRelaxed();
5529	if (!receiver)
5530	return false;
5531
5532	connections = QObjectPrivate::get(o: c->sender)->connections.loadRelaxed();
5533	Q_ASSERT(connections);
5534	connections->removeConnection(c);
5535
5536	c->sender->disconnectNotify(signal: QMetaObjectPrivate::signal(m: c->sender->metaObject(), signal_index: c->signal_index));
5537	// We must not hold the receiver mutex, else we risk dead-locking; we also only need the sender mutex
5538	// It is however vital to hold the senderMutex before calling cleanOrphanedConnections, as otherwise
5539	// another thread might modify/delete the connection
5540	if (receiverMutex != senderMutex) {
5541	receiverMutex->unlock();
5542	}
5543	connections->cleanOrphanedConnections(sender: c->sender, lockPolicy: ConnectionData::AlreadyLockedAndTemporarilyReleasingLock);
5544	senderMutex->unlock(); // now both sender and receiver mutex have been manually unlocked
5545	locker.dismiss(); // so we dismiss the QOrderedMutexLocker
5546	}
5547
5548	return true;
5549	}
5550
5551	/*!
5552	\internal
5553
5554	Used by QPropertyAdaptorSlotObject to get an existing instance for a property, if available
5555	*/
5556	QtPrivate::QPropertyAdaptorSlotObject *
5557	QObjectPrivate::getPropertyAdaptorSlotObject(const QMetaProperty &property)
5558	{
5559	if (auto conns = connections.loadAcquire()) {
5560	Q_Q(QObject);
5561	const QMetaObject *metaObject = q->metaObject();
5562	int signal_index = methodIndexToSignalIndex(base: &metaObject, signal_index: property.notifySignalIndex());
5563	if (signal_index >= conns->signalVectorCount())
5564	return nullptr;
5565	const auto &connectionList = conns->connectionsForSignal(signal: signal_index);
5566	for (auto c = connectionList.first.loadRelaxed(); c;
5567	c = c->nextConnectionList.loadRelaxed()) {
5568	if (c->isSlotObject) {
5569	if (auto p = QtPrivate::QPropertyAdaptorSlotObject::cast(ptr: c->slotObj,
5570	propertyIndex: property.propertyIndex()))
5571	return p;
5572	}
5573	}
5574	}
5575	return nullptr;
5576	}
5577
5578	/*! \class QMetaObject::Connection
5579	\inmodule QtCore
5580	Represents a handle to a signal-slot (or signal-functor) connection.
5581
5582	It can be used to check if the connection is valid and to disconnect it using
5583	QObject::disconnect(). For a signal-functor connection without a context object,
5584	it is the only way to selectively disconnect that connection.
5585
5586	As Connection is just a handle, the underlying signal-slot connection is unaffected
5587	when Connection is destroyed or reassigned.
5588	*/
5589
5590	/*!
5591	Create a copy of the handle to the \a other connection
5592	*/
5593	QMetaObject::Connection::Connection(const QMetaObject::Connection &other) : d_ptr(other.d_ptr)
5594	{
5595	if (d_ptr)
5596	static_cast<QObjectPrivate::Connection *>(d_ptr)->ref();
5597	}
5598
5599	/*!
5600	Assigns \a other to this connection and returns a reference to this connection.
5601	*/
5602	QMetaObject::Connection &QMetaObject::Connection::operator=(const QMetaObject::Connection &other)
5603	{
5604	if (other.d_ptr != d_ptr) {
5605	if (d_ptr)
5606	static_cast<QObjectPrivate::Connection *>(d_ptr)->deref();
5607	d_ptr = other.d_ptr;
5608	if (other.d_ptr)
5609	static_cast<QObjectPrivate::Connection *>(other.d_ptr)->ref();
5610	}
5611	return *this;
5612	}
5613
5614	/*!
5615	Creates a Connection instance.
5616	*/
5617
5618	QMetaObject::Connection::Connection() : d_ptr(nullptr) {}
5619
5620	/*!
5621	Destructor for QMetaObject::Connection.
5622	*/
5623	QMetaObject::Connection::~Connection()
5624	{
5625	if (d_ptr)
5626	static_cast<QObjectPrivate::Connection *>(d_ptr)->deref();
5627	}
5628
5629	/*! \internal Returns true if the object is still connected */
5630	bool QMetaObject::Connection::isConnected_helper() const
5631	{
5632	Q_ASSERT(d_ptr); // we're only called from operator RestrictedBool() const
5633	QObjectPrivate::Connection *c = static_cast<QObjectPrivate::Connection *>(d_ptr);
5634
5635	return c->receiver.loadRelaxed();
5636	}
5637
5638
5639	/*!
5640	\fn QMetaObject::Connection::operator bool() const
5641
5642	Returns \c true if the connection is valid.
5643
5644	The connection is valid if the call to QObject::connect succeeded.
5645	The connection is invalid if QObject::connect was not able to find
5646	the signal or the slot, or if the arguments do not match.
5647	*/
5648
5649	QT_END_NAMESPACE
5650
5651	#include "moc_qobject.cpp"
5652